-
SKU# IT-SP8DDMX Splitters are used to create multiple independent branches of a DMX signal and/or extend the usable distance of each branch. Our DIN Rail mounted DMX Splitter, the IT-SP8D, is designed for use in permanent installations. Each of the 8 output ports on this model can generate an independently protected DMX signal capable of traveling up to 1,800 feet (550 meters). The IT-SP8D includes a DMX Pass-Thru port for cascading DMX through multiple splitters and provides a built-in DMX Termination switch. 8 Port DIN Rail DMX Splitter Does not include power supply Key Features
- Compact DIN Rail housing
- Pluggable terminal blocks for each connection
- Rugged anodized aluminum cover plate
-
SKU# DMX-5RGB-34XXSIRS-E® Direct DMX RGB LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, and blue diodes can be mixed to potentially produce over a million color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGB Full Info Pack
- DMX LED Strip Brochure
- DMX RGB Datasheet
- DMX RGB IES File (zip)
- DMX RGB Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# DMX-5RGBWN-32XXSIRS-E® Direct DMX RGBW LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, blue and white (5500K) diodes can be mixed to potentially produce over a billion color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. 5-pin XLR connector included with every reel. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGBW Full Info Pack
- DMX LED Strip Brochure
- DMX RGBW Datasheet
- DMX RGBW IES File (zip)
- DMX RGBW Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# DMX-12WHXX-60XXIntroducing our SIRS-E® DMX White LED Strip – the ultimate lighting solution for professionals and enthusiasts alike. This cutting-edge LED strip empowers you to create captivating lighting displays with unparalleled precision and control. With direct DMX512 signal compatibility, you can program each pixel to craft dynamic, pixel-perfect lighting effects using your preferred DMX software. Customize the intensity of every diode effortlessly, eliminating the need for additional decoders or signal filters. All it takes is data and power to unlock endless lighting possibilities. Elevate your lighting game with the SIRS-E® DMX White LED Strip and transform any space into a visual masterpiece. UL Certification coming soon!
Quick Links:
-
SKU# DMX-RJ45-SPLITTERThe IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supply
Features:
- RJ45 Ports for easy connection in DMX systems that use Category 5 cables
- DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters
- 8 Independently generated and protected output ports
- Each port can drive a DMX line an additional 1,500 feet (500 meters)
- Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports
- Can be used in systems wired for DMX512 or Color Kinetics® devices
- User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes
- User-selectable input line termination switch
- Ultra-compact design provides 8 DMX ports just 14in2 (90cm2)
Configuration:
The IT-SP8R has two user-selectable configuration switches.
Termination:The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON.
Polarity:
There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert.
CAT5 DMX Wiring:
The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring.
When the Polarity switch is set to "Normal", the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to "Invert", the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa.
Quick Links: SKU# DMX-RJ45-SPLITTER -
Out of stockSKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):
- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# dmx-venue-packIntroducing our NEW DMX LED Strip Venue Lighting Kits. Each kit is different, however all of them come with the same basic components allowing you to choose from a simple economical set-up, to a more elaborate DMX pixel by pixel controlled LED Strip installation. With each of these kits (and your imagination), you can turn your business, church, or home into a vibrant new setting while providing endless possibilities and design options. There are up to four different packages to choose from ranging from "Basic" to "Ultimate Plus,” each being customizable to best fit your project's specific needs as well as your budget. Give us a call today and we will help to choose the best Venue Kit suited for your needs. View specific package details: Basic | Pro | Ultimate | Ultimate+
Basic
This DMX pixel-by-pixel LED package is suitable for either 16 rays of 4 foot LED Strips or 8 rays of 8 foot LED Strips. **Please note that these packages do not contain any type of metal structure** Package Contains:- 1 - MADRIX License Key - Entry
- 1 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 4 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 8 - LED Power Supply 30 Watts 5 Volts
- 32 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 20 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 4 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 1 Hour of Technical Supports
Pro
This DMX pixel-by-pixel LED package is suitable for either 32 rays of 4 foot LED Strips, 16 rays of 8 foot LED Strips or 8 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Entry
- 2 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 8 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 16 - LED Power Supply 30 Watts 5 Volts
- 64 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 40 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 8 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 2 Hours of Technical Support
Ultimate
This DMX pixel-by-pixel LED package is suitable for either 64 rays of 4 foot LED Strips, 32 rays of 8 foot LED Strips or 16 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Basic
- 3 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 16 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 32 - LED Power Supply 30 Watts 5 Volts
- 128 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 60 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 16 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 3 Hours of Technical Support
Ultimate Plus
This DMX pixel-by-pixel LED package is suitable for either 128 rays of 4 foot LED Strips, 64 rays of 8 foot LED Strips or 32 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Basic
- 6 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 32 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 64 - LED Power Supply 30 Watts 5 Volts
- 256 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 80 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 32 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 4 Hours of Technical Support
-
Out of stockSKU# DMX-TEST-01Free Ground Shipping.
The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works
- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-01 -
Out of stockSKU# DMX-TEST-02Free Ground Shipping.
The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-XXXXThe SIRS-E® DMX Digital White Vertical Tube (CV) Series is a vertical LED tube pendant light controlled by Pixel by Pixel DMX512. You now can enjoy the benefits of DMX with a double-sided board, allowing for a 360° visual effect. You can create custom scrolls, chases, drops, EQ, or build a cascade effect, all with a high CRI white LED. The double-sided LED board is encapsulated in a waterproof IP65 polycarbonate plastic housing, allowing a perfect setup and smoother effect. Thanks to a 3-way “T” hanging cable, it is possible to create a vertical or 3D effect installation. Downloadable Documentation: DMX White Vertical Tube Brochure DMX White Vertical Tube Datasheet
-
SKU# LIN100S1LINEARdrive 100/S delivers 8A and is DALI and DMX compatible. LINEARdrive 100/S has four separately controllable LED outputs, which can be used for a wide range of full-color (RGBW), dynamic LED lighting applications. You can configure the driver over its intuitive, 3-button user interface with the display: it lets you configure the number of channels, DMX, or DALI settings for networked mode and show, color, and dim values for standalone operation. Features
- HydraDrive: Provides the smoothest flicker-free high-performance dimming to dark for every fixture
- Tunable dynamic response
- LEDcode technology: Configurable design to work with most constant current LED modules and arrays while providing a connection point to integrated peripheral controls
- Input voltage: AC 220-250V, 50-60Hz
- Input current: 1.05A max
- Output power: 100W max
- Output voltage: 12- 24VDC
- Constant Voltage
- 4 Channels
- UL Class 2, 100W
-
Out of stockSKU# 70572Quick Links:
-
SKU# 70304DMX USB Pro is the Industry standard DMX USB Interface for DMX/RDM. Control your lights from PC or Mac programs The first choice of lighting professionals Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a reliable and robust product that excels at so many fundamental applications. It allows for USB 2.0 support through its USB-B connection to send or receive a physical DMX512 signal from PCs, Macs and Linux devices running through a vast array of third-party software that supports our DMX USB Pro software API. This DMX USB converter features an internal frame buffer for consistently generating DMX frames when outputting, ensuring a reliable flow of data and always giving you a stable data stream, regardless of your PC’s workload. Downloadable Documentation:
-
SKU# 70-581ENTTEC LED Mapper (ELM) Pixel mapping software The ultimate, intuitive LED pixel mapping software solution. ENTTEC’s ELM is the easiest and smartest way to convert your ideas into reality. This intuitive 2D and 3D LED pixel mapping solution has options to suit any project, ranging from 4 universes up to an impressive 2048 universes Downloadable Documentation: A license is required to unlock our Pixel mapping software’s full functionality. However, the app is free to download as a working trial version with upgrade reminder screens. So what are you waiting for? Start mapping today! ELM Mapping Software Download ELM Release Notes ELM User Manual DEMO Project Are you an ELM noob? Once you’ve installed the software above, you can download and import this handy, pre-assembled project file to start exploring ELM’s UI controls, features and effects without first having to build your own stage from scratch. Simples! Demo Project File 001(.elm) Want to control ELM via a web interface? ELM can serve static web pages on your local network, removing the need for you to set up a web server. We’ve made an example template for you to try out with your project. Simply download the folder here and follow the guide to get going! ELM Example WEB Interface (.rar) TouchOSC Controlling ELM with Touch OSC Guide Simple TouchOSC Content and Intensity Example
-
Out of stockSKU# 70314The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO
- Dual, fully independent, DMX ports each with full RDM capability
- MIDI input and output ports
- Standalone operation for unattended replay of lighting shows (limit 1 universe)
- One firmware version supports all features
- Aesthetically slim-profile, machined aluminium box
- True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
- Internal frame buffering (preserve data integrity when computer is busy)
- Works at various communication speeds
- Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
- Stores configuration and user data in EEPROM
- Refresh rate configurable from 1 to 40Hz
- Break time configurable from 96uS to 1.3mS
- MaB time configurable from 10.6uS to 1.3mS
- Upgradeable firmware
- Security / software protection API
- Comes with USB and break out cables
- USB Cable
- Break Out Cable (79146 - DB15 to 3DMX)
-
SKU# 7009312-Universe, DIN-rail-mountable solution for the recording, triggering, and activation of not only light shows, but video, non-lighting events, and much more. ENTTEC’s S-PLAY MINI is a robust and compact show recorder and playback controller that streamlines your light show by seamlessly integrating external hardware, enabling you to achieve professional lighting control with ease. S-PLAY MINI generates a maximum of 16 light Static/Dynamic/Effect Cues by recording two Universes of Art-Net/sACN sources or one complete Universe via DMX port live recording. Alternatively, you have the option to use the onboard pixel effects generator – an easy-to-use tool for creating gradient Effect Cues in just a matter of minutes. The S-PLAY MINI gives you the ability to fully integrate external devices into your installation – and not just light fixtures. Receive triggers from buttons, switches, or sensors to automate 3rd party devices or machinery using contact closures, Art-Net, sACN, DMX, UDP, or OSC. Using the S-PLAY MINI’s handy web browser interface, simply drag and drop within the timeline to design up to eight playlists using created Cues, Events, and Triggers as building blocks. Control the priority, fade times, number of play counts, and master intensities to tweak your playlists. Play back your program on power up with preset loop times, or choose to trigger the playlists with a custom interface or external triggers in a different fashion to play back up to eight playlists simultaneously overlapping and blending with each other, with different groups and priorities. Downloadable Documentation:
ShopMark Eviota2024-04-02T12:17:21-05:00