DIN Splitter


DIN Splitter

DMX Splitters are used to create multiple independent branches of a DMX signal and/or extend the usable distance of each branch. Our DIN Rail mounted DMX Splitter, the IT-SP8D, is designed for use in permanent installations. Each of the 8 output ports on this model can generate an independently protected DMX signal capable of traveling up to 1,800 feet (550 meters). The IT-SP8D includes a DMX Pass-Thru port for cascading DMX through multiple splitters and provides a built-in DMX Termination switch.

8 Port DIN Rail DMX Splitter
Does not include power supply

Key Features

  • Compact DIN Rail housing
  • Pluggable terminal blocks for each connection
  • Rugged anodized aluminum cover plate

Technical Specifications

  • Power – 6-30VDC, 2-position removable terminal block
  • DMX Input – 3-position removable terminal block
  • DMX Pass-Thru – 3-position removable terminal block
  • DMX Output – (8x) 3-position removable terminal block
  • DMX Termination – Yes, On/Off Switch
  • DMX Polarity Inversion – Not needed as polarity can be inverted at each terminal block
  • Width – 4.17″ (106 mm)
  • Length – 4.82″ (122 mm)
  • Height – 2.00″ (51 mm) with DIN Rail brackets, 1.22″ (31 mm) without DIN Rail brackets
  • Weight – 7.8 oz. (222 g)
  • Operating Temperature – -40° to 158° F (-40° to 70° C)
  • Storage Temperature – -40° to 176° F (-40° to 80°C)
  • Relative Humidity – 5% to 95% noncondensing
  • Altitude – 10,000 feet maximum
  • Included Items – IT-SP8D Splitter Unit, Removable DIN Rail brackets, Getting Started Documentation
  • Warranty – Two years from the date of purchase by the original owner (limited to defects in material or workmanship under normal use and service). See Limited Factory Warranty document for more details.



There are no reviews yet.

Be the first to review “DIN Splitter”