-
SKU# DURACAT5E4 Pair DURACAT 24AWG CAT5E Cable is ideal for making your own heavy duty RJ45 cable. This high quality cable is tested to work best when paired with RJ45-PLUG-KIT male connectors for custom length Ethernet cables. This rugged 4 pair cable is shielded by thick coating. It is built for a high speed clean signal that can travel long distances. This cable is ideal of DMX lighting setups where signal purity is of great importance. Meets Cat5E Specifications. SKU# DURACAT5E
-
SKU# PC-4FReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life.
- Length: 4 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to 3 wire
- Design: Male connector plugs into standard outlet; bare wires for AC connection of power supplies, and other devices that require hardwired AC power
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
-
SKU# PC-6SFReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life. Specifications:
- Length: 6 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to two 3-pin shroud female(IEC-320-C13)
- Design: Female connectors plug directly into device and male connector plugs into standard outlet
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
- Connects computer to wall outlet
- Stranded unshielded PC or monitor power cable.
- 110/120 volt
- Ideal when you are running out of space on your power/surge protector or wall outlets
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE
-
SKU# SE-XXXXXXSIRS-E® Aluminum Flat & Angle Bar Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet
-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:
- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# SE-CRXXXXXXSIRS-E® CR-3030S Corner Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet
-
SKU# DMX-5RGB-34XXSIRS-E® Direct DMX RGB LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, and blue diodes can be mixed to potentially produce over a million color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGB Full Info Pack
- DMX LED Strip Brochure
- DMX RGB Datasheet
- DMX RGB IES File (zip)
- DMX RGB Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# DMX-5RGBWN-32XXSIRS-E® Direct DMX RGBW LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, blue and white (5500K) diodes can be mixed to potentially produce over a billion color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. 5-pin XLR connector included with every reel. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGBW Full Info Pack
- DMX LED Strip Brochure
- DMX RGBW Datasheet
- DMX RGBW IES File (zip)
- DMX RGBW Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# DMX-12WHXX-60XXIntroducing our SIRS-E® DMX White LED Strip – the ultimate lighting solution for professionals and enthusiasts alike. This cutting-edge LED strip empowers you to create captivating lighting displays with unparalleled precision and control. With direct DMX512 signal compatibility, you can program each pixel to craft dynamic, pixel-perfect lighting effects using your preferred DMX software. Customize the intensity of every diode effortlessly, eliminating the need for additional decoders or signal filters. All it takes is data and power to unlock endless lighting possibilities. Elevate your lighting game with the SIRS-E® DMX White LED Strip and transform any space into a visual masterpiece. UL Certification coming soon!
Quick Links:
-
Out of stockSKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
-
Out of stockSKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):
- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-XXXXThe SIRS-E® DMX Digital White Vertical Tube (CV) Series is a vertical LED tube pendant light controlled by Pixel by Pixel DMX512. You now can enjoy the benefits of DMX with a double-sided board, allowing for a 360° visual effect. You can create custom scrolls, chases, drops, EQ, or build a cascade effect, all with a high CRI white LED. The double-sided LED board is encapsulated in a waterproof IP65 polycarbonate plastic housing, allowing a perfect setup and smoother effect. Thanks to a 3-way “T” hanging cable, it is possible to create a vertical or 3D effect installation. Downloadable Documentation: DMX White Vertical Tube Brochure DMX White Vertical Tube Datasheet
-
SKU# LIN100S1LINEARdrive 100/S delivers 8A and is DALI and DMX compatible. LINEARdrive 100/S has four separately controllable LED outputs, which can be used for a wide range of full-color (RGBW), dynamic LED lighting applications. You can configure the driver over its intuitive, 3-button user interface with the display: it lets you configure the number of channels, DMX, or DALI settings for networked mode and show, color, and dim values for standalone operation. Features
- HydraDrive: Provides the smoothest flicker-free high-performance dimming to dark for every fixture
- Tunable dynamic response
- LEDcode technology: Configurable design to work with most constant current LED modules and arrays while providing a connection point to integrated peripheral controls
- Input voltage: AC 220-250V, 50-60Hz
- Input current: 1.05A max
- Output power: 100W max
- Output voltage: 12- 24VDC
- Constant Voltage
- 4 Channels
- UL Class 2, 100W
-
SKU# VLM60W-24The VLM60-24 LED driver is the smallest 24V driver with high efficiency available that is capable of powering up to 60W of LED lighting. FEATURES
- Constant Voltage LED Driver (Low Voltage)
- Input Voltage: 120V AC, 277V AC
- Output Voltage-Channel 1: 24V DC
- Output Current 1: 2.50A
- Output Power: 60
- UL Class 2 & FC Certified
- High power density of 20 W/in
- IP40 - Indoor / Damp
- Dimensions: 5.10 x 0.75 x 0.75 in (L x W x H)
- ERP VLM60W-24
-
SKU# VLM100W-24The VLM100-24 LED driver is the smallest 24V driver with high efficiency available that is capable of powering up to 96W of LED lighting. FEATURES
- Constant Voltage LED Driver (Low Voltage)
- Input Voltage: 120-277Vac, 220- 240Vac
- Output Voltage: 24VDC
- Output Current: 4A
- Output Power: 96W
- UL Class 2 & FC Certified
- 90°C maximum case hot spot temperature
- IP40 - Indoor / Damp
- Dimensions: 5.4 x 1.0 x 0.75 in (L x W x H)
- ERP VLM100W-24
-
SKU# SE-FX13-1FThe outdoor mounting channel offers a permanent solution for attaching SIRS-E®’s outdoor waterproof versions of LED flexible tape lighting to surfaces that are less than ideal for typical adhesive use. Aside from the included 3M VHB adhesive on our LED tape lighting, this durable and flexible silicon channel is used in situations where regular adhesives can deteriorate over time and is resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED tape mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: This item is sold by the foot Video: LED Strip Light Extrusion Flexible Silicone IP68 Outdoor Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: Direct DMX RGB/RGBW Series AcuHue™ CV RGBW Series AcuVibrant™ CV RGB Series AcuVivid™ CV White Series