-
SKU# LED-PS05-60W-ULImportant Features:- Input: 88-264VAC
- Efficiency: 79%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Maximum Output Power: 60 W
- Output Voltage: 5 V
- Output Current: 12 A
- Output Connector Type: Screw Terminal Block
- Size: 5"L x 3.8"W x 1.5"H
- Weight: 1 lb.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-80W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-90W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-96W67-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 93%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- UL Recognized
- Class 2 Power Unit
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC
- Maximum Output Power: 96.0 W
- Output Voltage: 24 V
- Output Current: 4 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: L220 X W68 X H38.8 mm
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
- Wet Environment
-
SKU# RF-MZTHMulti-Zone RF Remote Holder for Multi-Zone RF Remotes can be easily mounted to a wall or surface area of your choosing and act as a great complement to your RF remote and controller accessories. SKU# RF-MZTH -
SKU# RF-MZTX-RGBXTech Specs:- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-RGBTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- A total of 8 programmed sequences to choose from, 5 color rotating sequences and 3 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Ability to control up to 4 zones per transmitter remote, and multiple receiver RF controllers
- RGB Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
-
SKU# RF-MZTRX-RGBTech Specs for Controller (RF-MZTRX-RGB):- Input Voltage: 12V – 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C – 60˚C (-4˚F – 140˚F)
- 1-year warranty
- A total of 8 programmed sequences to choose from, 5 color rotating sequences and 3 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGB Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
Tech Specs for Remote(RF-MZTX):- Operating Voltage: DC 3V (2 x AAA batteries – Not Included)
- Ambient Temperature: -20 C – 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High-Quality ABS plastic
- 1-year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in-line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-RGBWTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1 year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
-
SKU# RF-MZTRX-RGBWTech Specs for Controller (RF-MZTRX-RGBW):- Input Voltage: 12V – 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C – 60˚C (-4˚F – 140˚F)
- 1-year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
Tech Specs for Remote(RF-MZTX):- Operating Voltage: DC 3V (2 x AAA batteries – Not Included)
- Ambient Temperature: -20 C – 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High-Quality ABS plastic
- 1-year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in-line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-1CHTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- With the ability to control up to 4 zones, you can control multiple setups with one remote.
- Wireless RF control, up to 30m in-line of sight range.
- Power OFF Data Memory allows you to keep your saved settings, even after shutting off the controller.
- User-Friendly set up and control.
- Compatible with LED amplifiers.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers per zone.
-
SKU# RF-MZTX-1CHTech Specs:- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works with Single Color Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-1CH Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZTRX-1CHQuick Links: RF-MZRX-1CH-Datasheet RF-MZTX-1CH Datasheet -
SKU# NC4FP-1TECHNICAL DATA Electrical- Number of contacts: 3 - 7 (except MP: 3-6)
- Rated voltage: 50 V ac
- Contact resistance: < 5 m
- Insulation resistance - initial: > 2 G
- - after damp heat test: > 1 G
- -IEC 68-2-30)
- Dielectric strength: 1500 V dc
- Rated current:
- 3 pole: 16 I [A], 2.5/14 mm2/AWG, ≤ 4 C
- 4 pole: 10 I [A], 1.5/16 mm2/AWG, ≤ 7 C
- 5 and 6 pole: 7.5 I [A], 1.0/18 mm2/AWG, ≤ 7 C
- 7 pole: 5 I [A], 1.0/18 mm2/AWG, ≤ 9 C
- Lifetime: > 1000 mating cycles
- Insertion / withdrawal force: ≤ 20 N
- Retention method (Female versions only): - standard: latch lock
- "-0" version: retention spring
- Separating force: ≤ 20 N
- Shell: ZnAl4Cu1, gal Ni or black Cr plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: - female (3 pole): CuSn6
- female (4-7pole) & male: CuZn39Pb3
- Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
- Latch lock & spring: CK 67 steel, treated
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
-
SKU# NAC3FCALockable cable connector, power-in, screw terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled
Quick Links:
SKU# NAC3FCA -
SKU# NAC3FCBLockable cable connector, power-out, screw terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled SKU# NAC3FCB -
SKU# NAC3MPAChassis connector, power-in, 3/16'' flat tab terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NEUTRIK-XX-33 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.SKU# NEUTRIK-XX-3- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well proteced against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# 715218-Universe DIN rail LED pixel controller The OCTO is the NextGen DIN-rail LED pixel controller -> a pixel data converter & controller capable of controlling up to 1360 RGB LED pixels. Downloadable Documentation: Knowledge Base & FAQ's Supported LED Protocols Hi-Res Images Technical Drawings / Dimensions Release Notes Documents 0.3 & firmware v4.0 are for OCTO MK2 with serial numbers 2374307 onwards only Datasheet 0.3 User Manual 0.3 Firmware v4.0 Custom Protocol Creation Guide 0.3 Documents 0.2 & firmware v3.1 are for OCTO MK2 with serial numbers 2341008 - 2350677 only (**Factory reset before updating to V3.1 for a smooth update) Datasheet 0.2 User Manual 0.2 Firmware v3.1 Documents 0.1 & firmware v2.1 are for OCTO MK2 with serial numbers 2318635 - 2323030 only Datasheet 0.1 User Manual 0.1 Firmware v2.1 -
SKU# 70407The ultimate Power Over Ethernet DMX interface The ODE MK3 is a robust, reliable, installation-grade, Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With two Universes of bi-directional eDMX to DMX conversion and Art-RDM support, the ODE MK3 is compatible with a wide range of devices and allows for fast deployment of your DMX system. Simply connect, configure and take control! Additionally, this Ethernet to DMX/RDM gateway is packed with installer-friendly features for a speedy installation and configuration, all managed through a web UI – and contained in a compact, portable form factor. With 2 Universes of Ethernet to DMX conversion featuring Art-RDM support, Power over Ethernet (PoE) or a flexible 12-24v DC input, the ODE MK3 allows for fast deployment of DMX systems compatible with a wide range of devices. Downloadable Documentation: Datasheet User Manual Technical Drawing Firmware V1.4 Release Notes -
Out of stock
SKU# PELICAN-CASEPelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!- Interior (L x W x D): 8.5" x 5.88" x .75"
- Exterior (L x W x D): 9.28" x 7.56" x 4.35"
- Weight: 2.1 lbs
- Includes Pluck-’n-Pick foam set
- Carry handle, Waterproof, Lockable
- Room for AC adapter and/or spare batteries
- Comes in Black only
- Interior (L x W x D): 8.25" x 4.25" x 2.25"
- Exterior (L x W x D): 9.37" x 5.56" x 2.62"
- Weight: 1.03 lbs
- Padded interior
- Waterproof
- Room for AC adapter
- Comes with Carabiner
- Comes in black only
-
SKU# XPC-1PHAROS In stock and ready to ship! Video: Pharos Expert Quick Presentation by SIRS-E High Quality DMX Touch Screen With the reliability you expect from Pharos and the expertise in dynamic lighting in architecture and entertainment: an easy to install, easy to use control solution. XPC 1 - Expert Control 1 (Lighting controller with 512 channels eDMX/DMX, DALI, IO) XPC 2 - Expert Control 2 (Lighting controller with 1,024 channels eDMX/DMX, DALI, IO) XPR - Expert Repeat (DMX Splitter with 1 in, 4 out, 24V DC) XPS - Expert Switch (Unmanaged PoE Ethernet switch with 4 Port, Class 2 PoE, 24V DC) XPT 5 W - Expert Touch 5 White (5” wall mount touchscreen interface) † *- 5 Year Warranty
- Installer Friendly
- Reliability
- Free Software
-
SKU# Pilotino-CRMXIntroduction The PILOTINO® CRMX PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This module is a plug and play unit that instantly equips the PILOTINO® decoder with robust CRMX wireless capabilities. The PILOTINO® CRMX PCB is compatible with any kind of CRMX transmitter, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. Pair it with the CRMX transmitter of your choice and you are done. Video: Pilotino® Feature Video Key Features:- Compatible with any CRMX Device
- Robust Wireless Signal
- RDM Compatible
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
- PILOTINO® CRMX PCB
- u.FL to Female SMA Coax Cable (10 cm)
- Dipole Tilt Swivel Antenna
-
SKU# Pilotino-PCBIntroduction This version of the PILOTINO® comes in a bare PCB format. This product is intended to be embedded into custom fixtures and lighting control systems in which component size is critical. Equipped with 6 mounting holes, the PILOTINO® PCB is ready to be installed with M2.5 x 5mm standoffs into any sort of enclosure. The output channel count is configurable, allowing the user to employ this state of the art LED decoder in channel modes of 1-5. This means it can be used with monochrome, RGB, RGBW, RGBA, and RGBWA type of LED strips. The DMX addressing is achieved with the on-board dip switches, or it can be configured through RDM. This standard has many useful tools to set up and diagnose issues in an installation by providing temperature readings, current and voltage meters and other useful instruments. One of the most important features of this product involves the on board 10 socket. This socket is meant to be used with the expansion modules to equip the PILOTINO® PCB with on board WiFi or CRMX capabilities. With the PILOTINO® CRMX PCB or PILOTINO® WiFi PCB, you instantly convert this decoder into a CRMX or Art-Net node receiving unit. This Allows for a completely wireless solution. You can also hard-wire a DMX cable into the connector ports for wired configurations, or use one main receiving unit with any of the wireless modules and daisy chain the rest of the decoders with DMX cables. Key Features:- Wireless Capability
- UL Recognized
- DMX Ready
- RDM Configurable
- RDM Data Feedback
- Onboard IO Socket (For Connectivity)
- Small Footprint
- Wire to Board Quick Connectors
- Standoff Mounting
- 5 Year Limited Warranty
- Made in Italy
-
SKU# Pilotino-WifiIntroduction The PILOTINO® WiFi PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This device is a plug and play unit that instantly equips the PILOTINO® PCB with a WiFi Network Connection. The PILOTINO® WiFi PCB is compatible with any kind of Art-Net app, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. This device is compatible with any sort of Network Based DMX control system, including Art-Net. Video: Pilotino® Feature Video Key Features:- WiFi mode: Station/SoftAP
- Compatible with any ArtNet App
- Robust Wireless 2.4GHz Signal
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
-
SKU# 70067A smart, cost-effective lighting control solution, the Pixelator Mini is a compact 16 Universe rack, surface & DIN-rail mountable, eDMX to LED pixel protocol converter. Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to 8,192 channels (2,730 RGB pixels) across its 8 PLink outputs (2 Universes per port) with perfect synchronisation across each. The Pixelator Mini acts as the head end of ENTTEC’s PLink control system. The PLink data it generates can be sent up to 300m using standard CAT6 cabling to plug into ENTTEC’s compact power injection modules and LED dimmers. Flexibility is at the heart of the design. Power the Pixelator Mini using either the DC power supply included in the box or by using PoE. Install it using one of the four mounting options included in the box, then configure and update it from anywhere on your network using its intuitive web interface. Downloadable Documentation: Pixelator Mini Datasheet User Manual Firmware (Note: This firmware is not backward compatible with the 70066 Pixelator Mini) -
SKU# SE-DWXXXXXXSIRS-E® Plaster-In Drywall Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# 7354XThe smart way to connect your Pixel lights The PLink Injector has been engineered to work alongside your Pixelator to extend your LED pixel layout over long distances. The PLink Injector has been engineered to work as part of an ENTTEC Pixelator Series set up to make it fast, easy and affordable for you to control LED pixel strips or pixel dots over long distances. The injector features an external DC power supply as well as high-power screw terminal connectors. In addition, they are ideal for custom shape pixel LED installations and their scalable design is perfect for large projects. You can choose from the 5V or 12-24V options depending upon your layout. Then simply re-inject power from an external source, and you’re away! Depending on your applications, our Plink Injector comes also in a rugged IP66-rated version, ideal for extreme weather conditions and outdoor installations. Downloadable Documentation: PLink Datasheet PLink Application Diagram -
SKU# LED-CAB-PWR2 Pin red-black connectors Male or Female, 20AWG, 12 in wire length LED-CAB-2M-PWR: Male LED-CAB-2F-PWR: Female Quick Links: SKU# LED-CAB-PWR -
SKU# AD-PRO-6-PSTech Specs:- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# DMX-4CSXP-22XX-XXThe SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications
-
SKU# SE-RSXXXXXXSIRS-E® Recessed Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# DMX-CON6The DMX-CON6 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 6 amps max per channel @ 12V DC with a total power of 432W and @ 24V DC with a total power of 864W. This LED Decoder provides you with the freedom to control 6 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Decoder
- 6 output channels, max 6A per channel.
- 864W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON6
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-6 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
ShopMark Eviota2024-04-02T12:17:21-05:00
