-
Out of stockSKU# PELICAN-CASEPelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!
- Interior (L x W x D): 8.5" x 5.88" x .75"
- Exterior (L x W x D): 9.28" x 7.56" x 4.35"
- Weight: 2.1 lbs
- Includes Pluck-’n-Pick foam set
- Carry handle, Waterproof, Lockable
- Room for AC adapter and/or spare batteries
- Comes in Black only
- Interior (L x W x D): 8.25" x 4.25" x 2.25"
- Exterior (L x W x D): 9.37" x 5.56" x 2.62"
- Weight: 1.03 lbs
- Padded interior
- Waterproof
- Room for AC adapter
- Comes with Carabiner
- Comes in black only
-
Out of stockSKU# DMX-TEST-02Free Ground Shipping.
The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
Out of stockSKU# DMX-TEST-01Free Ground Shipping.
The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works
- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-01 -
SKU# DMX-TUBE-PROGTech Specs:
- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors
- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE
-
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.
- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-XXXXThe SIRS-E® DMX Digital White Vertical Tube (CV) Series is a vertical LED tube pendant light controlled by Pixel by Pixel DMX512. You now can enjoy the benefits of DMX with a double-sided board, allowing for a 360° visual effect. You can create custom scrolls, chases, drops, EQ, or build a cascade effect, all with a high CRI white LED. The double-sided LED board is encapsulated in a waterproof IP65 polycarbonate plastic housing, allowing a perfect setup and smoother effect. Thanks to a 3-way “T” hanging cable, it is possible to create a vertical or 3D effect installation. Downloadable Documentation: DMX White Vertical Tube Brochure DMX White Vertical Tube Datasheet
-
SKU# LED-PIXEL-HP3W-64mmQuick Links: Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-HP3W-64mm
- Operating Voltage: DC 12V
- Max Current: 3W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: High efficiency and power LED 1 watt per color
- Total LEDs: 1
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: SelfAddress
- Viewing Angle: 360° Weight: 250g
- 64mm x 64mm x 64mm
- 2.50in. x 2.50in. x 2.50in.
-
SKU# LED-PIXEL-12Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-12
- Operating Voltage: DC 24V
- Max Current: 3.6W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: SMD RGB 5050
- Total LEDs: 3
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: Self Address
- Viewing Angle: 360°
- Weight: 264g
- 104mm x 104mm x 83mm
- 4.09in. x 4.09in. x 3.26in
-
SKU# Klus-B1888Tech Specs:
- Color: Silver
- Material: Aluminum
- Length: 1m (3.28') or 2m (6.56')
- Compatible with Covers: KLUS 1547,KLUS 1548
- Mounting Options: Double Sided mounting tape, KLUS 1072
- Certification: CE, UR
- 5050 RGB or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This includes Cove, Edge and Contour lighting.
- Easy installation dedicated for room-and deco-light!
-
SKU# Klus-B5554Tech Specs:
- Color: Silver
- Material: Aluminum
- Compatible with Covers: KLUS-17011
- Length: 1m (3.28') or 2m (6.56')
- Mounting Options: double sided mounting tape, mounting glue, or screws
- Certification: CE, UR
- 5050 RGB, 5050 RGBW, 5050 DMX, 5050 Waterproof, or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This include Cove, Edge and Contour lighting.
- Easy installation dedicated for room- and deco-light!
-
SKU# SE-FX19-1FThe Outdoor “CC” Mounting Channel offers a permanent solution for attaching SIRS-E® waterproof rated AcuHue™ CC series of LED tape lighting to surfaces that are less than ideal for adhesive use. Aside from the included 3M VHB adhesive on our LED strips, this durable and flexible silicon channel is used in situations where regular adhesive can deteriorate over time. Resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED strip mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. 19mm Flexible Outdoor LED Strip Extrusion, 80+/-5 Clear Silicone, 1ft, Tolerance: RMAE2 Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: Item is Sold by the foot Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: AcuHue™ CC RGBW Series
-
SKU# SE-FX13-1FThe outdoor mounting channel offers a permanent solution for attaching SIRS-E®’s outdoor waterproof versions of LED flexible tape lighting to surfaces that are less than ideal for typical adhesive use. Aside from the included 3M VHB adhesive on our LED tape lighting, this durable and flexible silicon channel is used in situations where regular adhesives can deteriorate over time and is resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED tape mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: This item is sold by the foot Video: LED Strip Light Extrusion Flexible Silicone IP68 Outdoor Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: Direct DMX RGB/RGBW Series AcuHue™ CV RGBW Series AcuVibrant™ CV RGB Series AcuVivid™ CV White Series
ShopMark Eviota2024-04-02T12:17:21-05:00