Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  •

    The Pocket Console Series

    SKU# POCKET-CONSOLE
    Basic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:
    • Optional Pelican Cases are available
    • small, lightweight, portable and designed to be hand held
    • Levels are set using eight faders (slider pots)
    • Each FADER has an associated bump button
    • 512 dimmer addresses are patchable to any of the eight faders
    • The faders are patchable using from 0 to 512 dimmer addresses per fader
    • The unit is powered by a 9v battery OR by a 120v AC power supply
    Technical Specifications:
    • 9 Volt Alkaline Battery Life – 3 hours minimum
    • 120v AC adapter
    • Number of DMX dimmer addresses supported – 512
    • Number of Faders – 8 with bump buttons
    • Data output – DMX-512 1990 standard
    • Data Speed: 44hz
    • Comes with instructions & 90 day warranty
    Quick Links: SKU# POCKET-CONSOLE
    Details

  • Swisson XSH Hybrid Splitter DMX-RDM/DMX-Power

    SKU# XSH-HYBRID-SERIES
    The XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.
    • LED Display; signal, power
    • Optical isolation prevents signal disturbances
    • Clean and clear amplification of DMX and RDM signals
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 50VAC - 276VAC
    • Input DMX, 5 Pin XLR or 3 Pin XLR
    • Box version: M10 & M12 thread for a clamp an eye bolt for safety line
    • Dimensions; Rack LxWxH: 19"x134mmx1Unit
    Power
    • Powercon input (1pcs)max 20A
    • Powercon output (4pcs)max 20A
    • Power measurement 2-20 A in 2 A steps
    Quick Links: SKU# XSH-HYBRID-SERIES
    Details
  • Swisson XRC-CT15b External Contact Box for XRC-200

    Swisson XRC-CT15b External Contact Box for XRC-200

    SKU# XRC-CT15b
    15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.
    • Remote control of the XRC-200
    • Connection through a RJ45 cable (not included)
    • Powered by the XRC-200
    • 15 contacts
    • GND and VCC
    • LED connection control
    Quick Links: SKU# XRC-CT15b
    Details

  • Swisson XRC-200-W DMX Dynamic Recorder w/ Wall Mount

    SKU# XRC-200-W
    An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
    • Record and play back 64 sequences
    • 10 configurable play lists
    • Configurable fade times
    • Optional 15 control inputs
    • 2 DMX inputs
    • 2 DMX outputs
    • Built-in timer
    • Backup device
    • USB connection for firmware update, and PC software
    • PC software for uploading, downloading and storage of shows
    • Exact 100% record and replay of complex lighting movements and lighting sequences
    • All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
    • The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
    • Can be connected to a timer
    • Keyboard lock function
    • Wall mount
    • 2 universe input/2 universe output
    Quick Links SKU# XRC-200-W
    Details

  • Swisson XRC-200 DMX Dynamic Recorder

    SKU# XRC-200
    An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
    • Record and play back 64 sequences
    • 10 configurable play lists
    • Configurable fade times
    • Optional 15 control inputs
    • 2 DMX inputs
    • 2 DMX outputs
    • Built-in timer
    • Backup device
    • USB connection for firmware update, and PC software
    • PC software for uploading, downloading and storage of shows
    • Exact 100% record and replay of complex lighting movements and lighting sequences
    • All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
    • The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
    • Can be connected to a timer
    • Keyboard lock function
    • Wall mount
    • 2 universe input/2 universe output
    Quick Links: SKU# XRC-200
    Details
  • Swisson XND 4-Port Ethernet DMX Node

    Swisson XND 4-Port Ethernet DMX Node

    SKU# XND-4
    The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features
    • Art-Net to DMX converter for 4 independent universes
    • Supports Art-Net I, II and 3
    • 4 individually optically isolated DMX outputs
    • Graphic display and encoder knob for easy configuration and precise status information
    • Quick access button for each DMX output port for quick selection of ArtNet universe
    • Neutrik powerCON input and output
    • Universal power supply
    Applications
    • Control light shows from an Art-Net capable lighting desk
    • Control lighting fixtures using an Art-Net enabled PC software or a mobile device
    • Merge the light controlling data sent from two Art-Net controllers
    Quick Links: SKU# XND-4
    Details

  • Swisson XMT-350 RDM & DMX Controller Complete Set

    SKU# XMT-350
    Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.
    • RDM controller
    • Set DMX address remotely
    • Set "Personality" mode remotely
    • Readout RDM device information
    • Automatic DMX patch support over RDM
    • DMX receiver
    • DMX transmitter
    • RGB LED control
    • Moving light control
    • Cable tester
    • Channel "tracer"
    • Dip-switch display
    • Programmable sequence (Chaser)
    • Timing analysis
    • Configurable frame rate
    • PC software
    Quick Links: SKU# XMT-350
    Details

  • Swisson XMT-120A DMX Measurement Tool Complete Set

    SKU# XMT-120A
    Includes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.
    • DMX receiver
    • DMX transmitter
    • RGB LED control
    • Moving light control
    • Cable tester
    • Channel tracer
    • Dip-switch display
    • Programmable sequence
    • Timing analyzer
    • Adjustable DMX frame rate
    • PC software
    • And more
      Quick Links: SKU# XMT-120A
    Details

  • Swisson XMG-51 DMX High Speed Merger

    SKU# XMG-51
    The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.
    • 5 DMX512 inputs
    • 1 DMX512 output
    • Only 50us latency
    • Bypass relay
    • Manual switch
    • HTP, LTP channel, LTP line Modes
    • Channel offset for each input
    • Connect up to 5 lighting desks into one DMX-512 line
    • Fast uplink port with only 0.00005 second delay
    • Manual access
    • Channel offset for each port
    • Switch mode for backup
    • HTP merge mode (Highest Takes Precedence)
    • LTP merge mode (Last Takes Precedence)
    • HTP or LTP for each channel
    • Overwrite by priority
    • Optical isolated
    • Works on worldwide power supplies, 85V up to 267V
    Quick Links: SKU# XMG-51
    Details

  • Swisson XAC-ANT-2.4 Antenna 2.4 GHz to XSW

    SKU# XAC-ANT-2.4
    Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4
    Details

  • Swisson Wireless DMX Transmitters & Receivers

    SKU# SWISSON-XWL-TR
    • XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
    • XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
    • XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
    • XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
    • XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
    • XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
    • XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
    • XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
    The XWL series encompasses both, W-DMX as well as CRMXcompatible and compact wireless DMX transmitters and receivers. W-DMX from Wireless Solution and CRMX from LumenRadio are the leading technologies for wireless DMX transmission. With a latency of only about 5 ms, CRMX and W-DMX guarantee a DMX connection with the properties and reliability level equivalent to those of a wired link.

    Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.

    All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.

    • Wireless DMX receiver (XWL-R models)
    • Wireless DMX transmitter (XWL-T models)
    • Available with W-DMX™ or CRMX™
    • M10/M12 threads for truss mount
    • 3/8” thread for mounting on a microphone stand
    • Built-in power supply (powerCON connected)
    • Compact, rugged housing
    Quick Links: SKU# SWISSON-XWL-TR
    Details

  • Swisson RJ45 RDM & DMX Opto-Splitter

    SKU# RJ45-OPTO-SPLITTER
    The Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.
    • ETL/cETL/CE certified
    • Switch for RDM & DMX or DMX only
    • LED display; signal, power, RDM
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX and RDM protocol supervisor
    • Clean and clear amplification of DMX and RDM signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    XSR-8B-US: The RJ45 RDM & DMX Opto-Splitter Box is ETL/cETL/CE certified, equipped with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-US: The RJ45 RDM& DMX Single Rack is an ETL/cETL/CE certified, easily mountable rack with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-8R-US: The RJ45 RDM& DMX Double Rack is an ETL/cETL/CE certified, easily mountable rack with two RJ45 input, two RJ45 through, ten RJ45 outputs and a NEMA 5-15 molded plug. Quick Links: SKU# RJ45-OPTO-SPLITTER
    Details

  • Swisson RDM & DMX Opto-Splitter XLR 5 In & Thru

    SKU# XSR-RDM-OPTO-SPLITTER-5
    SWISSON-XSR-5B5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Box is ideal for limited space and is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Double Rack includes flanges for easy mounting, two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs.
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC - 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-RDM-OPTO-SPLITTER-5
    Details

  • Swisson RDM & DMX Opto-Splitter w/ Terminal

    SKU# XSR-OPTO-SPLITTER-TERMINAL
    The RDM & DMX Opto-Splitter is a convenient, less expensive way to build a permanent fixture. The terminal ports allow the user to directly connect into the hardwire of a device, instead of spending extra money on other connecters. SWISSON-XSR-IB5-W-US: The RDM & DMX Opto-Splitter Terminal Box with Wall Mount is a compact structure with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-US: The RDM & DMX Opto-Splitter Terminal Single Rack includes built in flanges for mounting, 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-TR5-US: The RDM & DMX Opto-Splitter Terminal Double Rack is equipped with flanges for easy rack mounting, 2 input terminals, 2 through terminals, and 10 output terminals.
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC - 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-OPTO-SPLITTER-TERMINAL
    Details

  • Swisson RDM & DMX Opto-Splitter Switch and Mix- Single

    SKU# XSR-5R2-US
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. Swisson XSR-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – 3-5 Pin and 2-3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSR-5R2-US
    Details
  • Swisson Equipment Success

    Swisson RDM & DMX Opto-Splitter Switch and Mix

    SKU# XSR-OPTO-SPLITTER-MIX
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-OPTO-SPLITTER-MIX
    Details

  • Swisson RDM & DMX Opto-Splitter

    SKU# XSR-RDM-OPTO-SPLITTER
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. SWISSON-XSR-3B-US: RDM & DMX Opto-Splitter Box containing one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-3R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs. SWISSON-XSR-5B-US: RDM & DMX Opto-Splitter Box containing one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-5R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs.
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC - 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-RDM-OPTO-SPLITTER
    Details
  • Swisson Equipment Success

    Swisson RDM & DMX A/B Splitter Mix

    SKU# XPD-DMX-AB-SPLITTER-MIX
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R8-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 3-pin XLR XPD-28-5R2-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 6 x 5-pin XLR and 2 x 3-pin XLR XPD-28-5R4-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 4 x 5-pin XLR and 4 x 3-pin XLR XPD-28-5R6-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 2 x 5-pin XLR and 6 x 3-pin XLR Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19″ Rack mountable
    Quick Links: SKU# XPD-DMX-AB-SPLITTER-MIX
    Details
  • Swisson RDM & DMX A/B Splitter

    Swisson RDM & DMX A/B Splitter

    SKU# XPD-DMX-AB-SPLITTER
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R-US 2:8, rack mountable DMX and RDM splitter, 5- pin XLR XPD-28-3R-US 2:8, rack mountable DMX and RDM splitter, 3- pin XLR XPD-28-8R-US 2:8, rack mountable DMX and RDM splitter, RJ45 Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19" Rack mountable
      Quick Links: SKU# XPD-DMX-AB-SPLITTER
    Details

  • Swisson Nylon Case for Box Size

    SKU# XAC-CASE-BOX
    Nylon case for Swisson Box size products. SKU# XAC-CASE-BOX
    Details

  • Swisson DMX Wireless Opto-Splitter

    SKU# XSW-TR-SERIES
    2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.
    • XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box
    • XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack
    • XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box
    • XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack
    • XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box
    • XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack
    • XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box
    • XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack
    SKU# XSW-TR-SERIES
    Details

  • Swisson DMX Opto-Splitter with Terminal Connections

    SKU# XSP-OPTO-SPLITTER-5
    The DMX Opto-Splitter Terminal is equipped with seven terminal ports which allow the user to directly hardwire into a DMX device for permanent fixtures. With the terminal connectors, the user will save money by not having to purchase additional standard connectors. The DMX Opto-Splitter Terminals make it possible to connect directly into the hardware. SWISSON-XSP-5B5-W-US: The DMX Splitter Terminal Box with Wall Mount comes in a compact box configuration with a wall mount and is equipped with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-TR5-US: The DMX Splitter Terminal Single Rack has 1 input terminal, 1 through terminal, 5 output terminals and includes mounting flanges for a rack. SWISSON-XSP-TR5-TR5-US: The DMX Splitter Terminal Double has 2 input terminals, 2 through terminals, 10 output terminals and is rack mountable with the included flanges. The DMX Splitter Terminal Double Rack is essentially two single racks side by side.
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC - 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
      Quick Links: SKU# XSP-OPTO-SPLITTER-5
    Details

  • Swisson DMX Opto-Splitter Switch and Mix- Single Rack

    SKU# XSP-5R2-US
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSP-5R2-US
    Details
  • Swisson DMX Opto-Splitter Switch

    Swisson DMX Opto-Splitter Switch and Mix- Double Rack Mix

    SKU# XSP-OPTO-SPLITTER-MIX
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSP-OPTO-SPLITTER-MIX
    Details

  • Swisson DMX Opto-Splitter 5 Pin XLR In & Thru – 3 Pin XLR Out

    SKU# XSP-OPTO-SPLITTER
    The Swisson DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out, perfect for a user looking to connect another DMX input, without wasting an additional output on the splitter. SWISSON-XSP-5B5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Box is a compact box structure with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON-XSP-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON:XSP-5R5-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC - 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSP-OPTO-SPLITTER
    Details

  • Swisson DMX Opto-Splitter

    SKU# XSP-SERIES-SPLITTER
    DMX splitters are the backbone of any DMX-512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. The XSP box models have a thread for a clamp and an eye for the safety line. These models are portable and suitable for truss mounting. The rack and double rack models are for 19“ rack systems. Customize your purchase by choosing from 3 Pin XLR or 5 Pin XLR inputs and outputs. XSP-3B: The DMX Opto-Splitter Box is equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R: The DMX Opto-Splitter Single rack is a mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B: The DMX Opto-Splitter Box is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R: The DMX Opto-Splitter Single rack is a mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs XSP-3B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 50VAC – 276VAC
    • Input (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
    • Through (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
    • Outputs 5pcs, DMX, XLR 5 pin or XLR 3 pin
    • Box version, M10 thread for a clamp and a eye bolt for safety line
    • 2 year warrranty
    Quick Links: SKU# XSP-SERIES-SPLITTER
    Details

  • Swisson DIN Rail Splitter Programs

    SKU# SWISSON-DIN-RAIL
    • ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
    • ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
    Tech Specs:
    • DMX splitter / booster
    • DMX repeater
    • LED display; signal, power, RDM
    • Input optically isolated
    • Each output individually optically isolated
    • RDM support (optional)
    • Extend DMX lines infinitely with the splitter
    • Rugged metal housing
    • Built-in termination
    • RJ-45 and pluggable screw terminal variants
    • DC power input, 10-48V DC, max. 400mA
    • Isolation between input and outputs as well as full isolation between each output
    • Dimensions: L=125mm, W=90mm, H=56mm
    • 2 Year Warranty
    The ISP-4 splitters also act as repeaters, and thus they may be used for transporting a DMX signal across larger distances. The DMX splitters of the ISP-4 line of products boost an incoming DMX signal and provide it on four output ports. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. DMX signals often get disturbed by the environment or even by the devices connected to the signal line. An ISP-4 splitter may completely clear the disturbances if it is connected at a location where the signal is still “readable”. Providing four individually optically isolated outputs, as well as an optically isolated input, the ISP-4 splitters may prevent harmful voltages applied to a given port from affecting the other ports and damaging the connected equipment. The bidirectional ISP-4R variants work within DMX / RDM environments, as well as in pure DMX environments. Therefore, ISP-4R splitters are a good solution not only for current RDM users, but also for those who expect to use RDM in the future. The ISP-4D variants on the other hand only work with DMX, while they ignore any RDM data. ISP-4 splitters are DIN rail mountable and powered by an external power supply unit. Quick Links: SKU# SWISSON-DIN-RAIL
    Details
  • Storm 8

    Storm 10 – 10-Universe Ethernet to DMX gateway

    SKU# 70057
    Control LED pixels with ease ENTTEC’s Storm10 is a compact, 10-universe installation-grade Ethernet to DMX to DMX/RDM converter designed to make controlling DMX lights over Ethernet simple by effortlessly converting sACN, Art-Net or ESP protocols to DMX512. Install it using one of four mounting options, then configure and update it from anywhere on your network using its intuitive web interface. Its convenient 10 outputs, plus 2 front facing ports make cabling familiar to installers and offers ultimate flexibility if you ever want to expand your infrastructure in the future. With an internal buffer and sync logic you can be confident that with an ENTTEC system you can build vast LED matrixes that span without experiencing any jitter, lag, content tearing or timing issues – ensuring that you stay perfectly synchronised across your entire show. Put simply, everything works as you’d expect it to. Predictability is a good thing. Downloadable Documentation: Datasheet User Manual Firmware (V1.1)
    Details

  • SIRS-E XLR Polarity Changer

    SKU# DMXN01
    High Quality hand made cable. Invert polarity from pin 2 to pin 3.
    Details
  • DMX 5 Pin XLR Neutrik Cable

    SIRS-E High Quality Flexible DMX Cable, 5 Pin XLR

    SKU# DMXN20-5D
    High Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s):

    Main Features
    • High Quality & Heavy-Duty DMX Cable hand-made in the USA
    • DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
    • Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
    • 5-Pin male & female connector with Nickel housing and silver contacts.
    • Rugged zinc Diecast shell, long-lasting and dependable.
    • Limited Lifetime Warranty

    Technical Specifications

    • Conductor:  AWG Size and Stranding: 24 AWG 7 strands 32 AWG
    • Conductor Material:  Bare annealed copper
    • Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
    • Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
    • Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
    • Length: 20ft
    • Weight:  14oz
    Material Used

    Documents

    MADE IN USA SKU# DMXN20-5D
    Details

  • SceneStation USB Stick

    SKU# SS-USB-STICK
    For use with SceneStation Studio software for Mac or Windows computers. The SceneStation USB Stick is used on your Mac or PC computer with the free SceneStation Studio software to remotely manage, control and program one or more wireless SceneStations. The adaptor provides the 2.4GHz communication link between the computer and the SceneStation Network. All wireless SceneStations can be protected by a Security PIN to allow only authorized users to be able to control or edit a station. SS-USB-STICK | USB Stick Wireless USB adaptor for use with SceneStation Studio and your Mac or PC.
    Details

  • SceneStation 3 Series

    SKU# SCENESTATION-3
    SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. SceneStation is entirely self-contained in a single gang, wall-switch sized unit. Perfect for restaurants, high-end residential, trade show booths, and more, SceneStation can control nearly any DMX device (RGB fixtures, moving lights, dimmers, effects, etc.), while also remaining very simple for the end user. SS-305 | Architectural SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes), flushplate Unit, pluggable wiring block and mounting hardware. Meant to be wall-mounted. SS-310 | Portable SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes) in a portable enclosure with 5-Pin XLR jacks and power supply (AC-12). Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. SS-315 | Portable SceneStation 3 Kit Includes SceneStation in a portable enclosure with 5-Pin XLR jacks, power supply (AC-12), SceneStation User's Remote and USB StationLink Adaptor, all enclosed in a protective carrying case. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. Key Features
    • Completely Self-Contained
    • 64 Scene Capacity
    • Static, Sequential, Toggle, Chase, Momentary & Pile-On Modes for Each Button
    • Built-in Effects Engine for creating dynamic scenes
    • Programmable RGB Backlit Buttons
    • Includes 2.4GHz Wireless SceneStation Module
    • DMX-512 Output (44Hz)
    • DMX Input Snapshot and/or Manual Channel Editing
    • IR Remote Setup and Operation
    • Optional "Power-On" Scene Selection
    • AC or DC Operation
    Quick Links: SKU# SCENESTATION-3
    Details
  • S-PLAY Smart Light Show Controller

    S-PLAY Smart Light Show Controller

    SKU# 70092
    The revolutionary smart show controller for hassle-free, professional light shows and automated projects. Engineered for projects that require precise automation, the S-PLAY smart light show controller is your all-in-one solution for the creation, recording, triggering, and activation of not only light shows but video, non-lighting events, and much more. Play back multiple shows simultaneously and install it virtually anywhere with flexible mounting options. Downloadable Documentation: Datasheet User Manual OSC API HTTP API TouchOSC Guide Remote Access Guide Specification Firmware: Firmware v2.1.1 Release Notes
    Details

  • RJ45 XLR Adaptors (3-pin, 5-pin)

    SKU# XLRJ45-XX
    XLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX
    Details
  • DMX Cable

    ProDMX-CAB 4 Conductors 22 AWG Shielded DMX Cable

    SKU# DMX-4CSXP-22XX-XX
    The SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s):

    Applications
    • DMX512 Lighting Control
    • Temporary or Permanent Installations
    • Stage Applications
    Quick Links:  ProDMX-CAB Brochure Datasheet:  ProDMX-CAB Datasheet Waterproof IP65 DMX Cable ProDMX-CAB Datasheet Plenum UL DMX Cable
    Details

  • Power Supply for AD-PRO-6 (Replacement)

    SKU# AD-PRO-6-PS
    Tech Specs:
    • 1 -Type A Electrical Male Plug
    • 1 -2.5MM sealed IP68 Power Plug
    • Input: AC 120V
    • Output: DC 12V
    • Current: 1.25A
    • Length: 68"
    • Color: Black (White XLR Cable)
    Overview: The AD-PRO-6 Power Supply is a custom-built power source for the AD-PRO-6. This unit can be used a replacement power supply for your PRO controller or as a backup for your current power supply. It is assembled with high quality materials in the USA. This power supply is included with the purchase of the AD-PRO-6 ArtNet to DMX PRO Controller. Features
    • Made with High Quality Switchcraft Components
    • Assembled in the USA.
    Quick Links: SKU# AD-PRO-6-PS
    Details
Visit Our YouTube Channel
BBB Accredited Business
C RU US Logo
C UL US Logo
IES Illuminating logo

IMPORTANT LINKS

About Us
Manufacturing & OEM Services
Security
Shipping & Return Policy
Terms of Use
Privacy Policy
Ordering
Careers
Contact Us

CONTACT INFORMATION

SIRS Electronics, Inc.
3307 West Street
Rosenberg, TX 77471


(281) 324-0908
9am – 6pm M-F (CDT)
We Ship World Wide
We also speak Spanish

We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!

Made in USA
SIRS-E Green Solution

Copyright © 2024 SIRS-E® All Rights Reserved – 3307 West Street, Rosenberg, TX 77471
SIRS-E: {semiconductor • illumination • research • solutions}

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. OK
Go to Top