-
SKU# DMX-CON4-C2This new edition of the DMX-CON4 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2
- DMX 512 LED Decoder
- 4 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
Out of stockSKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2
- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# 5050-CON-C4W
- 5050 RGB LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C4W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C4W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of an 5050 RGB SMD LED Strip
-
SKU# 5050-CON-C2W
- 5050 White LED Strip Coupler (Quick Connect) with Lead wires or Tail wires
- The 5050-CON-C2W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C2W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 White LED Strip
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE
-
SKU# LED-PIXEL-HP3W-64mmQuick Links: Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-HP3W-64mm
- Operating Voltage: DC 12V
- Max Current: 3W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: High efficiency and power LED 1 watt per color
- Total LEDs: 1
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: SelfAddress
- Viewing Angle: 360° Weight: 250g
- 64mm x 64mm x 64mm
- 2.50in. x 2.50in. x 2.50in.
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors
- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
Out of stockSKU# LED-CON-RF-WPTechnical data:
- Input voltage: DC12V/24V
- Output current: 3A/channel(9A in total)
- Control distance: 20m
- Frequency: 433MHZ
- Work Temperature: -20°C to 70°C
- IP 65
- remote wireless control for convenient use
- dropping electricity protection circuit (Powerdown mode)
- 7 single static colors
- 7 single colors fades (speed adjustable)
- Gradual color changing (speed adjustable)
- RGB jump
-
SKU# LED-PIXEL-12Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-12
- Operating Voltage: DC 24V
- Max Current: 3.6W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: SMD RGB 5050
- Total LEDs: 3
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: Self Address
- Viewing Angle: 360°
- Weight: 264g
- 104mm x 104mm x 83mm
- 4.09in. x 4.09in. x 3.26in
-
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.
- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)
-
Out of stockSKU# DMX-TEST-02Free Ground Shipping.
The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
SKU# RF-MZTRX-1CHQuick Links: RF-MZRX-1CH-Datasheet RF-MZTX-1CH Datasheet
-
SKU# RF-MZTRX-RGBWTech Specs for Controller (RF-MZTRX-RGBW):
- Input Voltage: 12V – 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C – 60˚C (-4˚F – 140˚F)
- 1-year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
Tech Specs for Remote(RF-MZTX):- Operating Voltage: DC 3V (2 x AAA batteries – Not Included)
- Ambient Temperature: -20 C – 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High-Quality ABS plastic
- 1-year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in-line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.