-
SKU# XPC-1PHAROS In stock and ready to ship! Video: Pharos Expert Quick Presentation by SIRS-E High Quality DMX Touch Screen With the reliability you expect from Pharos and the expertise in dynamic lighting in architecture and entertainment: an easy to install, easy to use control solution. XPC 1 - Expert Control 1 (Lighting controller with 512 channels eDMX/DMX, DALI, IO) XPC 2 - Expert Control 2 (Lighting controller with 1,024 channels eDMX/DMX, DALI, IO) XPR - Expert Repeat (DMX Splitter with 1 in, 4 out, 24V DC) XPS - Expert Switch (Unmanaged PoE Ethernet switch with 4 Port, Class 2 PoE, 24V DC) XPT 5 W - Expert Touch 5 White (5” wall mount touchscreen interface) † *- 5 Year Warranty
- Installer Friendly
- Reliability
- Free Software
-
SKU# Pilotino-CRMXIntroduction The PILOTINO® CRMX PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This module is a plug and play unit that instantly equips the PILOTINO® decoder with robust CRMX wireless capabilities. The PILOTINO® CRMX PCB is compatible with any kind of CRMX transmitter, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. Pair it with the CRMX transmitter of your choice and you are done. Video: Pilotino® Feature Video Key Features:- Compatible with any CRMX Device
- Robust Wireless Signal
- RDM Compatible
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
- PILOTINO® CRMX PCB
- u.FL to Female SMA Coax Cable (10 cm)
- Dipole Tilt Swivel Antenna
-
SKU# Pilotino-PCBIntroduction This version of the PILOTINO® comes in a bare PCB format. This product is intended to be embedded into custom fixtures and lighting control systems in which component size is critical. Equipped with 6 mounting holes, the PILOTINO® PCB is ready to be installed with M2.5 x 5mm standoffs into any sort of enclosure. The output channel count is configurable, allowing the user to employ this state of the art LED decoder in channel modes of 1-5. This means it can be used with monochrome, RGB, RGBW, RGBA, and RGBWA type of LED strips. The DMX addressing is achieved with the on-board dip switches, or it can be configured through RDM. This standard has many useful tools to set up and diagnose issues in an installation by providing temperature readings, current and voltage meters and other useful instruments. One of the most important features of this product involves the on board 10 socket. This socket is meant to be used with the expansion modules to equip the PILOTINO® PCB with on board WiFi or CRMX capabilities. With the PILOTINO® CRMX PCB or PILOTINO® WiFi PCB, you instantly convert this decoder into a CRMX or Art-Net node receiving unit. This Allows for a completely wireless solution. You can also hard-wire a DMX cable into the connector ports for wired configurations, or use one main receiving unit with any of the wireless modules and daisy chain the rest of the decoders with DMX cables. Key Features:- Wireless Capability
- UL Recognized
- DMX Ready
- RDM Configurable
- RDM Data Feedback
- Onboard IO Socket (For Connectivity)
- Small Footprint
- Wire to Board Quick Connectors
- Standoff Mounting
- 5 Year Limited Warranty
- Made in Italy
-
SKU# Pilotino-WifiIntroduction The PILOTINO® WiFi PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This device is a plug and play unit that instantly equips the PILOTINO® PCB with a WiFi Network Connection. The PILOTINO® WiFi PCB is compatible with any kind of Art-Net app, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. This device is compatible with any sort of Network Based DMX control system, including Art-Net. Video: Pilotino® Feature Video Key Features:- WiFi mode: Station/SoftAP
- Compatible with any ArtNet App
- Robust Wireless 2.4GHz Signal
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
-
SKU# 70067A smart, cost-effective lighting control solution, the Pixelator Mini is a compact 16 Universe rack, surface & DIN-rail mountable, eDMX to LED pixel protocol converter. Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to 8,192 channels (2,730 RGB pixels) across its 8 PLink outputs (2 Universes per port) with perfect synchronisation across each. The Pixelator Mini acts as the head end of ENTTEC’s PLink control system. The PLink data it generates can be sent up to 300m using standard CAT6 cabling to plug into ENTTEC’s compact power injection modules and LED dimmers. Flexibility is at the heart of the design. Power the Pixelator Mini using either the DC power supply included in the box or by using PoE. Install it using one of the four mounting options included in the box, then configure and update it from anywhere on your network using its intuitive web interface. Downloadable Documentation: Pixelator Mini Datasheet User Manual Firmware (Note: This firmware is not backward compatible with the 70066 Pixelator Mini) -
SKU# SE-DWXXXXXXSIRS-E® Plaster-In Drywall Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# 7354XThe smart way to connect your Pixel lights The PLink Injector has been engineered to work alongside your Pixelator to extend your LED pixel layout over long distances. The PLink Injector has been engineered to work as part of an ENTTEC Pixelator Series set up to make it fast, easy and affordable for you to control LED pixel strips or pixel dots over long distances. The injector features an external DC power supply as well as high-power screw terminal connectors. In addition, they are ideal for custom shape pixel LED installations and their scalable design is perfect for large projects. You can choose from the 5V or 12-24V options depending upon your layout. Then simply re-inject power from an external source, and you’re away! Depending on your applications, our Plink Injector comes also in a rugged IP66-rated version, ideal for extreme weather conditions and outdoor installations. Downloadable Documentation: PLink Datasheet PLink Application Diagram -
SKU# LED-CAB-PWR2 Pin red-black connectors Male or Female, 20AWG, 12 in wire length LED-CAB-2M-PWR: Male LED-CAB-2F-PWR: Female Quick Links: SKU# LED-CAB-PWR -
SKU# AD-PRO-6-PSTech Specs:- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# DMX-4CSXP-22XX-XXThe SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications
-
SKU# SE-RSXXXXXXSIRS-E® Recessed Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# DMX-CON6The DMX-CON6 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 6 amps max per channel @ 12V DC with a total power of 432W and @ 24V DC with a total power of 864W. This LED Decoder provides you with the freedom to control 6 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Decoder
- 6 output channels, max 6A per channel.
- 864W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON6
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-6 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON4V2The DMX-CON4V2 DMX decoder was made with our A-Grade RGBW LED Strips in mind. This particular decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 10 amps per channel at 12V DC with a total power of 480W and at 24V DC with a total power of 960W. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Controller
- 4 output channels, max 10A per channel
- 960W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4V2
- Meets DMX512/1990
- 256-levels of brightness, full-color with driver controls
- Can handle the high amp draw of RGBW Strips
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON4-C2This new edition of the DMX-CON4 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 4 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# RJ45-PLUG-KITRJ45 Heavy Duty Plug and Boot Kit is perfect for creating your own heavy duty RJ45 Cable. Its high quality components are tested to work best with DURACAT5E for custom length Ethernet cables. Unlike conventional RJ45 cables, heavy duty variants transfer cleaner signals at high speeds. This kit is ideal for DMX lighting setups where signal purity is of utmost importance. Heavy duty casing makes this ideal for installations with long cable runs. Meets Cat5E Specifications. Please Note: Each kit contains components necessary for one male RJ45 end. 2 Kits may be required for one cable with 2 male RJ45 ends. SKU# RJ45-PLUG-KIT -
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# 70092The revolutionary smart show controller for hassle-free, professional light shows and automated projects. Engineered for projects that require precise automation, the S-PLAY smart light show controller is your all-in-one solution for the creation, recording, triggering, and activation of not only light shows but video, non-lighting events, and much more. Play back multiple shows simultaneously and install it virtually anywhere with flexible mounting options. Downloadable Documentation: Datasheet User Manual OSC API HTTP API TouchOSC Guide Remote Access Guide Specification Firmware: Firmware v2.1.1 Release Notes -
SKU# SCENESTATION-3SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. SceneStation is entirely self-contained in a single gang, wall-switch sized unit. Perfect for restaurants, high-end residential, trade show booths, and more, SceneStation can control nearly any DMX device (RGB fixtures, moving lights, dimmers, effects, etc.), while also remaining very simple for the end user. SS-305 | Architectural SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes), flushplate Unit, pluggable wiring block and mounting hardware. Meant to be wall-mounted. SS-310 | Portable SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes) in a portable enclosure with 5-Pin XLR jacks and power supply (AC-12). Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. SS-315 | Portable SceneStation 3 Kit Includes SceneStation in a portable enclosure with 5-Pin XLR jacks, power supply (AC-12), SceneStation User's Remote and USB StationLink Adaptor, all enclosed in a protective carrying case. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. Key Features- Completely Self-Contained
- 64 Scene Capacity
- Static, Sequential, Toggle, Chase, Momentary & Pile-On Modes for Each Button
- Built-in Effects Engine for creating dynamic scenes
- Programmable RGB Backlit Buttons
- Includes 2.4GHz Wireless SceneStation Module
- DMX-512 Output (44Hz)
- DMX Input Snapshot and/or Manual Channel Editing
- IR Remote Setup and Operation
- Optional "Power-On" Scene Selection
- AC or DC Operation
-
SKU# SS-USB-STICKFor use with SceneStation Studio software for Mac or Windows computers. The SceneStation USB Stick is used on your Mac or PC computer with the free SceneStation Studio software to remotely manage, control and program one or more wireless SceneStations. The adaptor provides the 2.4GHz communication link between the computer and the SceneStation Network. All wireless SceneStations can be protected by a Security PIN to allow only authorized users to be able to control or edit a station. SS-USB-STICK | USB Stick Wireless USB adaptor for use with SceneStation Studio and your Mac or PC. -
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
SKU# SE-CVMD-12V60WThe SIRS-E 60-watt dimmable LED driver offers exceptional dimming performance for LEDs, compatible with many dimmers, especially recommended are Lutron and Leviton for their low-end range adjustment. It ensures smooth, stable, flicker-free dimming, with soft start, fade-on, and fade-to-dark capabilities, maintaining full brightness when set to the highest level. It's equipped with safety shut-off for overloads, short circuits, and over-temperature, with automatic restart after issue resolution. This Class 2 listed unit, suitable for indoor/outdoor use in dry and damp locations, requires no ground wire and operates on 12V DC power. Ideal for 12V DC LED tape lighting, ensure compatibility with other LED types by consulting the manufacturer. The 120VAC CVMD series 60W driver supports constant voltage PWM output and is TRIAC dimmable. Downloadable Documentation: Manual Datasheet -
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# DMXN01High Quality hand made cable. Invert polarity from pin 2 to pin 3.
ShopMark Eviota2024-04-02T12:17:21-05:00
