-
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# LED-PS12V-200W40-ULImportant Features:- Input: 90-132VAC / 180-264VAC selectable by switch
- High Efficiency
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- LED indicator for power on
- UL Recognized
- Non-Waterproof
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 240-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Size: 8.5"L x 4.5"W x 1.2"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# SE-FX13-1FThe outdoor mounting channel offers a permanent solution for attaching SIRS-E®’s outdoor waterproof versions of LED flexible tape lighting to surfaces that are less than ideal for typical adhesive use. Aside from the included 3M VHB adhesive on our LED tape lighting, this durable and flexible silicon channel is used in situations where regular adhesives can deteriorate over time and is resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED tape mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: This item is sold by the foot Video: LED Strip Light Extrusion Flexible Silicone IP68 Outdoor Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: Direct DMX RGB/RGBW Series AcuHue™ CV RGBW Series AcuVibrant™ CV RGB Series AcuVivid™ CV White Series -
SKU# RF-MZTHMulti-Zone RF Remote Holder for Multi-Zone RF Remotes can be easily mounted to a wall or surface area of your choosing and act as a great complement to your RF remote and controller accessories. SKU# RF-MZTH -
SKU# ACUHUE-24CC55SIRS-E® high quality RGBW LED strip AcuHue™ CC (5500K) series utilizes four LED diodes (red, green, blue, white – 5500K) and is operated via current control by integrated circuits placed directly on the flexible PCB. This strip can potentially produce over a billion color rendering options with almost no brightness loss over a 32 ft. run and is cuttable and mountable utilizing 3M VHB adhesive. Video(s): Constant Current Tape Light Downloadable Documentation:- AcuHue™ CC 5500 Full Info Pack
- AcuHue™ CC 5500 Datasheet
- AcuHue™ CC 5500 IES File (zip)
- AcuHue™ CC 5500 Photometric Test Report LM-79-2008
- This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam.
-
SKU# ACUVIVID-XXCV55SIRS-E® high quality White LED strip AcuVivid™ CV (5500K) produces a daylight white color temperature with a 95+ CRI, high rated luminous flux, and optimal luminous efficacy. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam. -
SKU# ACUVIVID-XXCV40SIRS-E® high quality White LED strip AcuVivid™ CV (4000K) produces a neutral white color temperature with a 95+ CRI, high rated luminous flux, and optimal luminous efficacy. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam. -
SKU# ACUVIVID-XXCV27SIRS-E® high quality White LED strip AcuVivid™ CV (2700K) produces a warm white color temperature with a 95+ CRI, high rated luminous flux, and optimal luminous efficacy. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam. -
SKU# ACUHUE-XXCV590SIRS-E® high quality RGBA LED strip AcuHue™ CV (590nm) utilizes four LED diodes (red, green, blue, amber – 590nm) which are mixed via a control method of your choice to potentially produce over a billion color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation:- AcuHue™ CV 590 Full Info Pack
- AcuHue™ CV 590 Datasheet
- AcuHue™ CV 590 IES File (zip)
- AcuHue™ CV 590 Photometric Test Report LM-79-2008
- Waterproof End-Caps Optional Accessory
-
SKU# ACUHUE-XXCV55SIRS-E® high quality RGBW LED strip AcuHue™ CV (5500K) utilizes four LED diodes (red, green, blue, white – 5500K) which are mixed via a control method of your choice to potentially produce over a billion color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation:- AcuHue™ CV 5500 Full Info Pack
- AcuHue™ CV 5500 Datasheet
- AcuHue™ CV 5500 IES File (zip)
- AcuHue™ CV 5500 Photometric Test Report LM-79-2008
- Waterproof End-Caps Optional Accessory
-
SKU# ACUVIBRANT-XXCVSIRS-E® high quality RGB LED strip AcuVibrant™ CV Series utilizes three LED diodes (red, green, blue) which are mixed via a control method of your choice to produce millions of color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam. -
SKU# ACUHUE-XXCV27SIRS-E® high quality RGBW LED strip AcuHue™ CV (2700K) utilizes four LED diodes (red, green, blue, white – 2700K) which are mixed via a control method of your choice to potentially produce over a billion color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam. -
SKU# PS12V300W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V300W-MAG -
SKU# PS12V200W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V200W-MAG -
SKU# PS12V150W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V150W-MAG -
SKU# PS12V100W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V100W-MAG -
SKU# LED-PS05V-30W-ULImportant Features:- High efficiency, up to 85.5%
- Protection against short circuit, over current, over voltage and over temperature
- Class I power unit, with FG
- UL Listed, suitable for dry and damp locations
- 3 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS05-60W-ULImportant Features:- Input: 88-264VAC
- Efficiency: 79%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Maximum Output Power: 60 W
- Output Voltage: 5 V
- Output Current: 12 A
- Output Connector Type: Screw Terminal Block
- Size: 5"L x 3.8"W x 1.5"H
- Weight: 1 lb.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# RF-MZTX-1CHTech Specs:- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works with Single Color Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-1CH Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-1CHTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- With the ability to control up to 4 zones, you can control multiple setups with one remote.
- Wireless RF control, up to 30m in-line of sight range.
- Power OFF Data Memory allows you to keep your saved settings, even after shutting off the controller.
- User-Friendly set up and control.
- Compatible with LED amplifiers.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers per zone.
-
SKU# DMX-5RGBWN-32XXSIRS-E® Direct DMX RGBW LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, blue and white (5500K) diodes can be mixed to potentially produce over a billion color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. 5-pin XLR connector included with every reel. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGBW Full Info Pack
- DMX LED Strip Brochure
- DMX RGBW Datasheet
- DMX RGBW IES File (zip)
- DMX RGBW Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# LED-PS05V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 200 W
- Output Voltage: 5 V
- Output Current: 40 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 24 V
- Output Current: 18.8 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# RF-MZTX-RGBXTech Specs:- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-RGBWTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1 year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
-
SKU# RF-MZRX-RGBTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- A total of 8 programmed sequences to choose from, 5 color rotating sequences and 3 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Ability to control up to 4 zones per transmitter remote, and multiple receiver RF controllers
- RGB Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
-
SKU# PS24V96W-ELEMagnitude’s 24V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS24V96W-ELE -
SKU# PS12V60W-ELEMagnitude’s 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V60W-ELE -
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
Features:1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
-
SKU# LED-PS24V-320W-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 95%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 320.0 W
- Output Voltage: 24 V
- Output Current: 13.3 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-260W-ULImportant Features:- Protections: Short circuit / Overload / Over voltage/Over temperature
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC, 127 VDC to 431 VDC
- Maximum Output Power: 264 W
- Output Voltage: 12 V
- Output Current: 22 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 12 V
- Output Current: 37.5 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
-
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
