-
SKU# 70304DMX USB Pro is the Industry standard DMX USB Interface for DMX/RDM. Control your lights from PC or Mac programs The first choice of lighting professionals Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a reliable and robust product that excels at so many fundamental applications. It allows for USB 2.0 support through its USB-B connection to send or receive a physical DMX512 signal from PCs, Macs and Linux devices running through a vast array of third-party software that supports our DMX USB Pro software API. This DMX USB converter features an internal frame buffer for consistently generating DMX frames when outputting, ensuring a reliable flow of data and always giving you a stable data stream, regardless of your PC’s workload. Downloadable Documentation: -
SKU# DMXN20-3LHigh Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L -
SKU# DMXN01High Quality hand made cable. Invert polarity from pin 2 to pin 3. -
-
SKU# SN8-IJISCOMMERCIAL STAGE CABLE PRICE IS PER FOOT 8 Pair w/shield, 24 AWG Snake cable, Black, Per Ft NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE -
SKU# LO-Z5PRICE IS PER FOOT High performance mic cable 20 gauge conductors with braided shield, Black, Per Ft Applications:- Heavy Duty Microphone Cable
- Signal Cable
- DMX
-
Out of stock
SKU# 70572Quick Links: -
SKU# IA-HW-001001Important Links:The USB ONE allows you to control 512 DMX channels via Madrix software.
- DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
- USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.
- Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.
- Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.
- Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.
- Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).
- Active USB: Must be connected to an active USB 2.0 hub with a power supply.
-
Out of stock
SKU# DMX-TEST-01Free Ground Shipping.The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works
- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-01 -
Out of stock
SKU# DMX-TEST-02Free Ground Shipping.The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
Out of stock
SKU# 70314The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO- Dual, fully independent, DMX ports each with full RDM capability
- MIDI input and output ports
- Standalone operation for unattended replay of lighting shows (limit 1 universe)
- One firmware version supports all features
- Aesthetically slim-profile, machined aluminium box
- True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
- Internal frame buffering (preserve data integrity when computer is busy)
- Works at various communication speeds
- Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
- Stores configuration and user data in EEPROM
- Refresh rate configurable from 1 to 40Hz
- Break time configurable from 96uS to 1.3mS
- MaB time configurable from 10.6uS to 1.3mS
- Upgradeable firmware
- Security / software protection API
- Comes with USB and break out cables
- USB Cable
- Break Out Cable (79146 - DB15 to 3DMX)
-
SKU# ST-DIO588PCB Module connects to the CuesStation 5-Wire network and provides 8 contact closure inputs and 8 digital outputs SKU# ST-DIO588 -
SKU# LO-Z21000 ft reel of American made Microphone Installation Wire Color: Black SKU# LO-Z2 -
Out of stock
SKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module -
SKU# RJ45-TERN-MK2Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2 -
SKU# XMT-120AIncludes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel tracer
- Dip-switch display
- Programmable sequence
- Timing analyzer
- Adjustable DMX frame rate
- PC software
- And more
-
Out of stock
SKU# PELICAN-CASEPelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!- Interior (L x W x D): 8.5" x 5.88" x .75"
- Exterior (L x W x D): 9.28" x 7.56" x 4.35"
- Weight: 2.1 lbs
- Includes Pluck-’n-Pick foam set
- Carry handle, Waterproof, Lockable
- Room for AC adapter and/or spare batteries
- Comes in Black only
- Interior (L x W x D): 8.25" x 4.25" x 2.25"
- Exterior (L x W x D): 9.37" x 5.56" x 2.62"
- Weight: 1.03 lbs
- Padded interior
- Waterproof
- Room for AC adapter
- Comes with Carabiner
- Comes in black only
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.
- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
-
SKU# XRC-200An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# XRC-CT15b15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.- Remote control of the XRC-200
- Connection through a RJ45 cable (not included)
- Powered by the XRC-200
- 15 contacts
- GND and VCC
- LED connection control
-
SKU# XMG-51The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.- 5 DMX512 inputs
- 1 DMX512 output
- Only 50us latency
- Bypass relay
- Manual switch
- HTP, LTP channel, LTP line Modes
- Channel offset for each input
- Connect up to 5 lighting desks into one DMX-512 line
- Fast uplink port with only 0.00005 second delay
- Manual access
- Channel offset for each port
- Switch mode for backup
- HTP merge mode (Highest Takes Precedence)
- LTP merge mode (Last Takes Precedence)
- HTP or LTP for each channel
- Overwrite by priority
- Optical isolated
- Works on worldwide power supplies, 85V up to 267V
-
SKU# XRC-200-WAn easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# LUNA-SERIESMadrix Luna Configuration Problems and Solutions If you’ve tried to configure your Madrix Luna thru Artnet using the Quick Start Guide and the software does not find the Luna. Then you may have to update the Luna’s firmware. To update the Firmware, connect the USB, close and open Madrix, then go to TOOLS/LUNA CONFIGURATION once Madrix detects your Luna, you highlight the unit and click “firmware”. Firmware update process should begin. This should fix ArtNet connectivity between Madrix and Luna. The MADRIX Luna family is made up of multi node DMX interfaces used for multiple universe installations. Available in 4, 8 and 16 universe configurations, the Luna is equipped with different modes and features. It can be used as an Art-Net device, allowing the user to convert DMX to Art-Net for projects that call for such application. It can also be used to distribute from 4 to 16 DMX universes with 1 DMX input depending on the Luna model you chose. For larger projects that call for more universes, multiple Lunas can be used. In MADRIX synch mode, the Luna allows you to synchronize Art-Net Data across 4-16 ports with no visual interruptions. The Luna is compatible with any third party Art-Net controller. Specifically designed by MADRIX, the Luna is the easiest multi node interface to configure. It is literally plug and play, and it is fully customizable as well. If settings need to be edited, it can all be easily done from the Device Manager section in the MADRIX software. High quality construction is what makes this interface reliable. Manufactured and designed in Germany, along with great customer support the Luna will definitely get the job done right the first time around. Made with only the highest quality components, the MADRIX Luna is designed to last. The Lunas have the standard rack dimensions, for easy rack installation and configuration. If a project calls for multiple Lunas, they can all be incorporated in a rack to neatly keep everything in place. With different status lights, and high quality Neutrik connectors, the MADRIX Luna will keep the show going in an effortless manner. The MADRIX Luna can also be used as a simple DMX to USB interface. It comes with a USB cable, making it a very versatile product capable of achieving many different styles of operation, from the most basic, to the complex. No matter if your set up is large scale or a smaller installation, the Luna will make the configuration a lot easier. There is very little programming to be done since it was specifically designed to work with MADRIX. Whether you are looking for high grade professional equipment that will not let you down, or you are just starting off in the lighting industry and you are looking for a simple, plug and play alternative to an otherwise complicated set up, the MADRIX Luna is ready to undertake any task, no matter the magnitude. Here at SIRS-E we stand by the products we represent and we want to give you the best experience possible. We know our products very well, and we want you to succeed in your next DMX lighting operation. Quick Links:- Madrix Product Brochure
- Madrix Luna User Manual
- Madrix Luna Quick Start Guide
- Madrix LUNA 4/8/16 Driver
-
SKU# Rackmount-2The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:- DMX Output: Board mounted terminal block
- Optional FlushMount Faceplate 5 pin XLR available
- Data Output: DMX-512 1990 standard, 44Hz
- Memory: Non-Volatile Flash
- Number of Channels: 8 with Momentary BUMP buttons
- Patch: Fully independent 512 DMX to 1-8 Channels
-
SKU# XSP-OPTO-SPLITTERThe Swisson DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out, perfect for a user looking to connect another DMX input, without wasting an additional output on the splitter. SWISSON-XSP-5B5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Box is a compact box structure with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON-XSP-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON:XSP-5R5-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-5The DMX Opto-Splitter Terminal is equipped with seven terminal ports which allow the user to directly hardwire into a DMX device for permanent fixtures. With the terminal connectors, the user will save money by not having to purchase additional standard connectors. The DMX Opto-Splitter Terminals make it possible to connect directly into the hardware. SWISSON-XSP-5B5-W-US: The DMX Splitter Terminal Box with Wall Mount comes in a compact box configuration with a wall mount and is equipped with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-TR5-US: The DMX Splitter Terminal Single Rack has 1 input terminal, 1 through terminal, 5 output terminals and includes mounting flanges for a rack. SWISSON-XSP-TR5-TR5-US: The DMX Splitter Terminal Double has 2 input terminals, 2 through terminals, 10 output terminals and is rack mountable with the included flanges. The DMX Splitter Terminal Double Rack is essentially two single racks side by side.- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-RDM-OPTO-SPLITTERThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. SWISSON-XSR-3B-US: RDM & DMX Opto-Splitter Box containing one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-3R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs. SWISSON-XSR-5B-US: RDM & DMX Opto-Splitter Box containing one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-5R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs.
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XAC-CASE-BOXNylon case for Swisson Box size products. SKU# XAC-CASE-BOX -
SKU# XSR-RDM-OPTO-SPLITTER-5SWISSON-XSR-5B5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Box is ideal for limited space and is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Double Rack includes flanges for easy mounting, two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs.
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-OPTO-SPLITTER-TERMINALThe RDM & DMX Opto-Splitter is a convenient, less expensive way to build a permanent fixture. The terminal ports allow the user to directly connect into the hardwire of a device, instead of spending extra money on other connecters. SWISSON-XSR-IB5-W-US: The RDM & DMX Opto-Splitter Terminal Box with Wall Mount is a compact structure with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-US: The RDM & DMX Opto-Splitter Terminal Single Rack includes built in flanges for mounting, 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-TR5-US: The RDM & DMX Opto-Splitter Terminal Double Rack is equipped with flanges for easy rack mounting, 2 input terminals, 2 through terminals, and 10 output terminals.
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSH-HYBRID-SERIESThe XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.- LED Display; signal, power
- Optical isolation prevents signal disturbances
- Clean and clear amplification of DMX and RDM signals
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC - 276VAC
- Input DMX, 5 Pin XLR or 3 Pin XLR
- Box version: M10 & M12 thread for a clamp an eye bolt for safety line
- Dimensions; Rack LxWxH: 19"x134mmx1Unit
- Powercon input (1pcs)max 20A
- Powercon output (4pcs)max 20A
- Power measurement 2-20 A in 2 A steps
-
SKU# XSP-SERIES-SPLITTERDMX splitters are the backbone of any DMX-512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. The XSP box models have a thread for a clamp and an eye for the safety line. These models are portable and suitable for truss mounting. The rack and double rack models are for 19“ rack systems. Customize your purchase by choosing from 3 Pin XLR or 5 Pin XLR inputs and outputs. XSP-3B: The DMX Opto-Splitter Box is equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R: The DMX Opto-Splitter Single rack is a mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B: The DMX Opto-Splitter Box is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R: The DMX Opto-Splitter Single rack is a mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs XSP-3B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC – 276VAC
- Input (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Through (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Outputs 5pcs, DMX, XLR 5 pin or XLR 3 pin
- Box version, M10 thread for a clamp and a eye bolt for safety line
- 2 year warrranty
-
SKU# RJ45-OPTO-SPLITTERThe Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.- ETL/cETL/CE certified
- Switch for RDM & DMX or DMX only
- LED display; signal, power, RDM
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX and RDM protocol supervisor
- Clean and clear amplification of DMX and RDM signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
-
SKU# XAC-ANT-2.4Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4
-
SKU# CS-SERIESCueServer are powerful lighting control and show playback processors designed to be completely self-contained and extremely cost effective. Available in a series of models, these powerhouse controllers provide limitless solutions to the lighting professionals. CueServer is a complete lighting playback and integration processor, featuring advanced DMX lighting control, sophisticated event scripting and robust I/O capabilities combined in a tiny web-based device. Great for both architectural and entertainment lighting control projects, CueServer provides an unprecedented level of control and customization in an easy-to-use package. CueServer includes a built-in web server that provides access to a full complement of lighting controls, show programming and playback features without the need for special software or an Internet connection. Apps for iPhone and iPad are available for direct control and/or programming of CueServer, or use with other 3rd party software that have been written to use CueServer as its DMX interface. After CueServer is programmed, it can function as a stand-alone show controller, leveraging its built-in real-time clock/calendar, astronomical time functions, button and contact closure inputs, and wide variety of event triggers to interact with the outside world. Integrate CueServer with other external devices via RS-232 serial, Ethernet connectivity and more for fully custom lighting and show control solutions. CS-810 | CueServer Mini The CueServer Mini includes a switching power supply, mounting flanges, RJ45 to Male 5-Pin XLR Adaptor for DMX input, and RJ45 to Female 5-Pin XLR Adaptor for DMX input. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. CS-900 | CueServer 2 Pro Includes rack mounted CueServer 2 with power supply, four empty DMX module panels, rack mounting brackets, terminal blocks and 1,024 Channel License CS-920 | CueServer 2 Mini (New) Includes CueServer 2 Mini with power supply, two empty DMX module panels, terminal block and 512 Channel License. CS-950 | CueServer 2 DIN (New) Includes DIN-Rail mounted CueServer 2 with terminal blocks, mounting flanges and 1,024 Channel License (power supply not included) CS-UNIV | CueServer 2 Add-On Universe License (New) Adds one additional universe of channels to CueServer 2 (up to a maximum of 32 universe per unit; please order with unit or provide unit's serial number to apply to) Key Features:- Completely self-contained lighting playback controller
- Seamlessly handles static scenes, crossfading and real-time "streaming" DMX playback
- Web-based "live" operation and programming
- Powerful CueScript programming language
- Handles up to 4 independent timelines
- Locally program lighting scenes or snapshot from external DMX source
- Network multiple CueServer units together to control a large number of channels or devices
- On-board real-time clock with astronomical functions and 365-day calendar events
- System integration via Ethernet, RS-232 and Digital I/O
- Easily interfaces with Crestron®, Vantage®, AMX® and other automation systems
- Huge onboard memory and removable memory card slot
- Rugged anodized extruded aluminum housing
- Removable "slide-in" flanges for surface mounting
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
