-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2
- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
Out of stockSKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
-
SKU# LED-WIRE-RB-XXHook-Up Wire Red & Black, is especially used to connect LED power supply and LED controller. Red/Black Zip Cord is a low voltage DC power cable. Also called zip wire and bonded wire, the cables pull apart for a quick separation. Easy to identify polarity for DC applications. Excellent for Single Color or white LED Strips, Amateur Radio, Automotive/Stereo, Robotics and R/C.
- Wire 14 AWG: Used for short to mid distances
- Wire 16 AWG: Used for short to mid distances
- Wire 18 AWG: Used for short distances
- Wire 20 AWG: Used for short distances
- Designed to meet UL VW-1 Vertical Wire Flame Test
- RoHS Compliant
-
SKU# 5050-CON-C4W
- 5050 RGB LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C4W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C4W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of an 5050 RGB SMD LED Strip
-
SKU# 5050-CON-C2W
- 5050 White LED Strip Coupler (Quick Connect) with Lead wires or Tail wires
- The 5050-CON-C2W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C2W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 White LED Strip
-
SKU# LED-PIXEL-HP3W-64mmQuick Links: Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-HP3W-64mm
- Operating Voltage: DC 12V
- Max Current: 3W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: High efficiency and power LED 1 watt per color
- Total LEDs: 1
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: SelfAddress
- Viewing Angle: 360° Weight: 250g
- 64mm x 64mm x 64mm
- 2.50in. x 2.50in. x 2.50in.
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors
- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.
- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)