-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10 -
SKU# DMX-TUBE-PROGTech Specs:- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# DIN-HMBKit for mounting CS-810, CS-816 horizontally on DIN Rail. SKU# DIN-HMB -
SKU# Klus-B5554Tech Specs:- Color: Silver
- Material: Aluminum
- Compatible with Covers: KLUS-17011
- Length: 1m (3.28') or 2m (6.56')
- Mounting Options: double sided mounting tape, mounting glue, or screws
- Certification: CE, UR
- 5050 RGB, 5050 RGBW, 5050 DMX, 5050 Waterproof, or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This include Cove, Edge and Contour lighting.
- Easy installation dedicated for room- and deco-light!
-
SKU# Klus-B1888Tech Specs:- Color: Silver
- Material: Aluminum
- Length: 1m (3.28') or 2m (6.56')
- Compatible with Covers: KLUS 1547,KLUS 1548
- Mounting Options: Double Sided mounting tape, KLUS 1072
- Certification: CE, UR
- 5050 RGB or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This includes Cove, Edge and Contour lighting.
- Easy installation dedicated for room-and deco-light!
-
SKU# 5050-CON-C5C55050 RGBW LED Strip Bridge Coupler (Quick Connect), 12mm wide. Used to join 5050 RGBW SMD LED Strips together. SKU# 5050-CON-C5C5 -
SKU# 5050-CON-C5W- 5050 RGBW LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires
- 12mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip
-
SKU# 5050-CON-C5WC5- Connector for 5050 LED RGBW strip to strip
- 12mm wide
- 12 in long wire
-
SKU# ART500The Art 500 is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the most effective control solution for architectural control. Included is the ART 500 software package, which others an easy-to-navigate interface combined with powerful control features. Not only can it be controlled remotely from an iPhone or iPad, but the ART500 is capable of learning sunset and sunrise times with integrated GPS coordination. This feature is excellent for installations that automatically need to light on at a certain time without relying on a photocell switch or other similar devices. Also available on the beautiful slim touch panel is an LCD screen which allows you to read all the different zones depending on how the user may have labeled them. Also, add pictures of the different zones in your installation displayed on the LCD, making it even easier to recognize which zone you select. Available in black and white colors, the ART500 is ready to bring any room into life with unparalleled lighting control. WHAT'S IN THE PACKAGE?- ART500 Controller
- USB Cable
- Micro SD Card
- Power Adapter
-
SKU# SWISSON-XWL-TR- XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
- XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
- XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
- XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
- XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
- XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.
All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.
- Wireless DMX receiver (XWL-R models)
- Wireless DMX transmitter (XWL-T models)
- Available with W-DMX™ or CRMX™
- M10/M12 threads for truss mount
- 3/8” thread for mounting on a microphone stand
- Built-in power supply (powerCON connected)
- Compact, rugged housing
-
SKU# XSW-TR-SERIES2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.- XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack
- XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack
-
SKU# SWISSON-DIN-RAIL- ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- DMX splitter / booster
- DMX repeater
- LED display; signal, power, RDM
- Input optically isolated
- Each output individually optically isolated
- RDM support (optional)
- Extend DMX lines infinitely with the splitter
- Rugged metal housing
- Built-in termination
- RJ-45 and pluggable screw terminal variants
- DC power input, 10-48V DC, max. 400mA
- Isolation between input and outputs as well as full isolation between each output
- Dimensions: L=125mm, W=90mm, H=56mm
- 2 Year Warranty
-
SKU# LED-CAB-PWR2 Pin red-black connectors Male or Female, 20AWG, 12 in wire length LED-CAB-2M-PWR: Male LED-CAB-2F-PWR: Female Quick Links: SKU# LED-CAB-PWR -
SKU# IA-HARD-001013MADRIX® USB light sensor This sensor measures the ambient light level. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX® as well as percent. Example of use: Master Fader SKU# IA-HARD-001013 -
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012 -
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011 -
Out of stock
SKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
SKU# DMX-CON4V2The DMX-CON4V2 DMX decoder was made with our A-Grade RGBW LED Strips in mind. This particular decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 10 amps per channel at 12V DC with a total power of 480W and at 24V DC with a total power of 960W. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Controller
- 4 output channels, max 10A per channel
- 960W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4V2
- Meets DMX512/1990
- 256-levels of brightness, full-color with driver controls
- Can handle the high amp draw of RGBW Strips
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON6The DMX-CON6 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 6 amps max per channel @ 12V DC with a total power of 432W and @ 24V DC with a total power of 864W. This LED Decoder provides you with the freedom to control 6 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Decoder
- 6 output channels, max 6A per channel.
- 864W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON6
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-6 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
-
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
ShopMark Eviota2024-04-02T12:17:21-05:00
