-
SKU# RF-MZRX-RGBTech Specs:- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- A total of 8 programmed sequences to choose from, 5 color rotating sequences and 3 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Ability to control up to 4 zones per transmitter remote, and multiple receiver RF controllers
- RGB Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
-
SKU# PS24V96W-ELEMagnitude’s 24V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS24V96W-ELE -
SKU# PS12V60W-ELEMagnitude’s 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V60W-ELE -
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
Features:1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
-
SKU# Baxter-9VPSReplacement adapter for Pocket Console™. Tech Specs- Output voltage: 9 VDC
- Output current: 200 mA
- Output power: 1.8 watts
- Output connector: 1.3mm x 3.5mm right angle female barrel plug
- Polarity: Center positive
- Size: 2.4"H x 1.7"W x 1.5"D
- Case color: Black
- Output cord length: 6 feet
- Weight: 0.4 lbs
- Agency approval: UL/CSA
-
SKU# LED-PS24V-320W-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 95%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 320.0 W
- Output Voltage: 24 V
- Output Current: 13.3 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-260W-ULImportant Features:- Protections: Short circuit / Overload / Over voltage/Over temperature
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC, 127 VDC to 431 VDC
- Maximum Output Power: 264 W
- Output Voltage: 12 V
- Output Current: 22 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 12 V
- Output Current: 37.5 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# IA-HW-001018The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality. Features: Direct Connection Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. Quality Output Of 8 Universes Each device drives up to 1.360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports. SPI Converter Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Use USB or Art-Net for all the great features of the MADRIX software. MADRIX Sync Mode Simply use several units at the same time for larger projects. Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. Invaluable Features The device is ready within seconds after startup. Its firmware is upgradable for future features. HTP Merging is automatically available for two Art-Net sources. Use the built-in web tool for configuration. Connectivity- 2x OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX NEBULA
- Set of screw terminals (2x 4-pin and 1x 2-pin)
- USB cable
- MADRIX software (license not included)
- 2 wall-mount brackets
Additional LED types will be supported with future firmware updates. Quick Links: SKU# IA-HW-001018- APA101
- APA102
- APA104
- APA106
- LPD6803
- LPD8806
- SM16703
- SM16716
- TLS3001
- TLS3008
- TM1804
- TM1809
- TM1812
- TM1829
- UCS1903
- WS2801
- WS2803
- WS2811
- WS2812
- WS2812B
-
SKU# IA-HW-001019The MADRIX STELLA is a dedicated control interface for Art-Net and DMX512 that is designed for high quality and practicability in permanent LED installations. Features: Art-Net Node Art-Net data is directly converted to DMX512. Optimize for short distances to your LEDs and decentralize cabling to cover any distance to the device using Ethernet network. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. 2 DMX-IN/OUT Directly connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX universes per unit as input and/or output, eliminating the need for XLR connectors as a result. Simply use several units at the same time for larger projects. Easy Configuration MADRIX STELLA offers powerful features, especially in combination with MADRIX. Take full advantage of pixel mapping and voxel mapping. Managing the device is still quick and easy. MADRIX Sync Mode Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all output ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. 3rd-Party Controllers MADRIX STELLA complies with the official Art-Net specifications and can be used as a regular Art-Net unit with your other consoles, controllers, or software solutions. MADRIX DMX512 USB Interface Alternatively, you can choose to connect the unit as a plug-and-play solution to your computer and the MADRIX software using any USB 2.0 port. Invaluable Features The device is ready within seconds after startup. HTP Merging is automatically available for two Art-Net sources. You can change specific device settings using the built-in web configuration tool. Connectivity- 2x DMX-IN/OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX STELLA
- Set of screw terminals (2x 3-pin and 1x 2-pin)
- USB power supply, USB cable, world adapters kit
- MADRIX software (license not included)
- 2 wall-mount brackets
-
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
-
-
SKU# XPD-DMX-AB-SPLITTER-MIXXPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R8-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 3-pin XLR XPD-28-5R2-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 6 x 5-pin XLR and 2 x 3-pin XLR XPD-28-5R4-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 4 x 5-pin XLR and 4 x 3-pin XLR XPD-28-5R6-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 2 x 5-pin XLR and 6 x 3-pin XLR Features- OLED display.
- Metal button/ potentiometer
- Amplifies/ boosts DMX
- Splits and cleans DMX signal
- RDM Protocol
- Enhanced DMX data regeneration
- Individual optical isolation on all ports
- Realtime DMX monitoring
- DMX Framerate display
- DMX channel overview
- 19″ Rack mountable
-
SKU# XPD-DMX-AB-SPLITTERXPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R-US 2:8, rack mountable DMX and RDM splitter, 5- pin XLR XPD-28-3R-US 2:8, rack mountable DMX and RDM splitter, 3- pin XLR XPD-28-8R-US 2:8, rack mountable DMX and RDM splitter, RJ45 Features- OLED display.
- Metal button/ potentiometer
- Amplifies/ boosts DMX
- Splits and cleans DMX signal
- RDM Protocol
- Enhanced DMX data regeneration
- Individual optical isolation on all ports
- Realtime DMX monitoring
- DMX Framerate display
- DMX channel overview
- 19" Rack mountable
-
SKU# XSR-OPTO-SPLITTER-MIXThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-5R2-USThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. Swisson XSR-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – 3-5 Pin and 2-3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-MIXDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-5R2-USDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# LED-TUB-XX3M™ Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all tubing is split resistant, mechanically tough, easily marked and resists cold flow. Typically used as a shrink-fit electrical insulation over cable splices and terminations. Great for use with 5050 LED Strip leads. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Please Note: This item is sold Per Feet SKU# LED-TUB-XX -
SKU# LED-PS24V-90W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-60W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- Class 2 Power Supply
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# MOD-XXXXDMX Modules for CueServer 2 Pro (CS-900) add physical DMX inputs or outputs. SKU# MOD-XXXX
ShopMark Eviota2024-04-02T12:17:21-05:00
