-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011
-
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012
-
SKU# SWISSON-DIN-RAIL
- ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- DMX splitter / booster
- DMX repeater
- LED display; signal, power, RDM
- Input optically isolated
- Each output individually optically isolated
- RDM support (optional)
- Extend DMX lines infinitely with the splitter
- Rugged metal housing
- Built-in termination
- RJ-45 and pluggable screw terminal variants
- DC power input, 10-48V DC, max. 400mA
- Isolation between input and outputs as well as full isolation between each output
- Dimensions: L=125mm, W=90mm, H=56mm
- 2 Year Warranty
-
SKU# SWISSON-XWL-TR
- XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
- XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
- XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
- XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
- XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
- XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.
All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.
- Wireless DMX receiver (XWL-R models)
- Wireless DMX transmitter (XWL-T models)
- Available with W-DMX™ or CRMX™
- M10/M12 threads for truss mount
- 3/8” thread for mounting on a microphone stand
- Built-in power supply (powerCON connected)
- Compact, rugged housing
-
SKU# ART500The Art 500 is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the most effective control solution for architectural control. Included is the ART 500 software package, which others an easy-to-navigate interface combined with powerful control features. Not only can it be controlled remotely from an iPhone or iPad, but the ART500 is capable of learning sunset and sunrise times with integrated GPS coordination. This feature is excellent for installations that automatically need to light on at a certain time without relying on a photocell switch or other similar devices. Also available on the beautiful slim touch panel is an LCD screen which allows you to read all the different zones depending on how the user may have labeled them. Also, add pictures of the different zones in your installation displayed on the LCD, making it even easier to recognize which zone you select. Available in black and white colors, the ART500 is ready to bring any room into life with unparalleled lighting control. WHAT'S IN THE PACKAGE?
- ART500 Controller
- USB Cable
- Micro SD Card
- Power Adapter
-
SKU# AD-PRO-6-PSTech Specs:
- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# AD-PRO-6-BKTech Specs:
- 1 - DB-15 Male Connector
- 6 - 5 Pin XLR Female Neutrik Connectors
- Length: 19"
- Color: Black (white XLR cable segments)
- Made with High Quality Horizon Cable
- Made with High Quality Neutrik Connectors
- Complies with DMX512 USITT standards
- Made in the USA.
-
SKU# XSR-5R2-USThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. Swisson XSR-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – 3-5 Pin and 2-3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-OPTO-SPLITTER-MIXThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# IA-HW-001019The MADRIX STELLA is a dedicated control interface for Art-Net and DMX512 that is designed for high quality and practicability in permanent LED installations. Features: Art-Net Node Art-Net data is directly converted to DMX512. Optimize for short distances to your LEDs and decentralize cabling to cover any distance to the device using Ethernet network. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. 2 DMX-IN/OUT Directly connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX universes per unit as input and/or output, eliminating the need for XLR connectors as a result. Simply use several units at the same time for larger projects. Easy Configuration MADRIX STELLA offers powerful features, especially in combination with MADRIX. Take full advantage of pixel mapping and voxel mapping. Managing the device is still quick and easy. MADRIX Sync Mode Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all output ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. 3rd-Party Controllers MADRIX STELLA complies with the official Art-Net specifications and can be used as a regular Art-Net unit with your other consoles, controllers, or software solutions. MADRIX DMX512 USB Interface Alternatively, you can choose to connect the unit as a plug-and-play solution to your computer and the MADRIX software using any USB 2.0 port. Invaluable Features The device is ready within seconds after startup. HTP Merging is automatically available for two Art-Net sources. You can change specific device settings using the built-in web configuration tool. Connectivity
- 2x DMX-IN/OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX STELLA
- Set of screw terminals (2x 3-pin and 1x 2-pin)
- USB power supply, USB cable, world adapters kit
- MADRIX software (license not included)
- 2 wall-mount brackets
-
SKU# IA-HW-001018The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality. Features: Direct Connection Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. Quality Output Of 8 Universes Each device drives up to 1.360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports. SPI Converter Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Use USB or Art-Net for all the great features of the MADRIX software. MADRIX Sync Mode Simply use several units at the same time for larger projects. Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. Invaluable Features The device is ready within seconds after startup. Its firmware is upgradable for future features. HTP Merging is automatically available for two Art-Net sources. Use the built-in web tool for configuration. Connectivity
- 2x OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX NEBULA
- Set of screw terminals (2x 4-pin and 1x 2-pin)
- USB cable
- MADRIX software (license not included)
- 2 wall-mount brackets
- APA101
- APA102
- APA104
- APA106
- LPD6803
- LPD8806
- SM16703
- SM16716
- TLS3001
- TLS3008
- TM1804
- TM1809
- TM1812
- TM1829
- UCS1903
- WS2801
- WS2803
- WS2811
- WS2812
- WS2812B
-
SKU# anyDMX-V2Features:
- Reliable wireless DMX 512 signal.
- Digital screen
- Up to 2,000 meters range. (Line of sight)
- A total of 16 frequencies to chose from.
- One unit can both transmit and receive.
- Unlimited amount of units can work together.
- Sturdy aluminum construction.
- One year warranty. (From date of purchase)
- Model: anyDMX-V2
- Operating Voltage: DC 5V
- Max Current: 500mA
- Ambient Temperature: -20°C~50°C
- Range: 2,000 m (In line of sight)
- IP Rating: IP40 (Non water proof, keep dry at all times)
- Working Frequency: 2.4GHz to 2.525GHz
- Dimensions : 209mm x 20mm x 20mm
- (8.22in. x .78in. x .78in.)
- Connect power supply to unit.
- Select same color frequency and mode LED light using the frequency changing key on both units. (This is your operating frequency)
- Connect transmitting unit to DMX console or software. (Gender changer is needed at this point)
- The frequency and mode LED will begin to flash red on the unit connected as transmitter.
- At this time, the frequency and mode LED on the receiving unit will flash blue. (This means it's receiving)
- Connect receiving unit to DMX fixture.
- A successful connection has now been achieved.
-
SKU# IA-SW-00500XQuick Links:
- Madrix Product Brochure
- Madrix 5 Flyer
- Download Madrix 5
- Download 5 Fixture Library
- Download Madrix Key Driver
-
SKU# IA-0050XXMadrix 5 Upgrades allow for you to upgrade from any previous license purchase to a higher version at anytime in order to increase the available output. If you are running a Madrix license version pre-version 5 release, you will need to purchase a Madrix Update and a Madrix Metallic Key before moving forward. Quick Links:
- Madrix Product Brochure
- Madrix 5 Flyer
- Download Madrix 5
- Download 5 Fixture Library
- Download Madrix Key Driver
-
SKU# XND-4The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features
- Art-Net to DMX converter for 4 independent universes
- Supports Art-Net I, II and 3
- 4 individually optically isolated DMX outputs
- Graphic display and encoder knob for easy configuration and precise status information
- Quick access button for each DMX output port for quick selection of ArtNet universe
- Neutrik powerCON input and output
- Universal power supply
- Control light shows from an Art-Net capable lighting desk
- Control lighting fixtures using an Art-Net enabled PC software or a mobile device
- Merge the light controlling data sent from two Art-Net controllers
-
SKU# DMX-4CSXP-22XX-XXThe SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications
- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications