-
SKU# LED-PS05V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 200 W
- Output Voltage: 5 V
- Output Current: 40 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# PS12V60W-ELEMagnitude’s 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V60W-ELE -
SKU# PS24V96W-ELEMagnitude’s 24V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS24V96W-ELE -
SKU# PS12V100W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V100W-MAG -
SKU# PS12V150W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V150W-MAG -
SKU# PS12V200W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V200W-MAG -
SKU# PS12V300W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V300W-MAG -
SKU# LED-PS24V-320W67-ULBFeatures- IP67, PFC, Metal Case
- Full range AC input: 90~305Vac
- Operating case temperature: -40~+90°C
- UL8750 type HL LED power supply
- Meet 4kV surge immunity level (IEC61000-4-5)
- Built-in active PFC
- IP67 durable aluminium enclosure
- High efficiency
- Compatible dimmer types: 1-10Vdc dimmer, 10V PWM dimmer, or resistance dimmer
- Protections: short circuit / over current / over voltage / over temperature
- Applications: LED electric display, lighting, LED street lighting and indoor/outdoor lighting
- MEAN WELL 7 year warranty
-
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# XLR3-TERM XLR5-TERMDMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES- A 120 Ohm DMX512 Terminator in an XLR connector
- Two XLR versions available, male 3-pin or male 5-pin
- Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment
- Use to avoid data signals being reflected from the end of the data cable
- Very robust, rugged molded housing with non-slip grip
- Product Weight (including packaging): 31g / 1.1oz
- Gold-plated pins on the connector
- Easy to use
- Low cost
- RoHS, REACH, and California Prop65 Certified
-
SKU# RJ45-DMXTERM-120-XXRJ45-DMXTERM-120 or RJ45-DMXTERM-120-2U is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. -
SKU# DMXCOMPDMXcompander RJ45 DMX Compander 3 DMX Universes Over 1 CAT5 Cable DMXcompander makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data pairs, one pair is used as the 0V reference and the other three pairs are used for DMX512 Data+ and Data-. Through the three RJ45 connectors on the DMXcompander, three DMX512 Universes are "COMpressed" into one CAT-5 cable through the Universe 1+2+3 RJ45 connector. At the other end of the CAT-5 cable, another DMXcompander can be used to "exPAND" the DMX512 Universes again, making them available through the three RJ45 connectors. Together with CAT-5 cables and CPOINT's XLR RJ45 adapters, a DMX512 network can be set up very quickly and at a very low cost Product Features- Three DMX512 Universes (1536 channels) combined into one CAT-5 cable
- RJ45 connectors are used for connection with inexpensive CAT-5 cables
- Gold-plated pins on RJ45 connectors
- Sturdy molded housing
- Mountable on DIN rail
- Mountable in the lighting rig
- Use as a flexible DMX outlet
- Mountable with 5mm/0.2” screws or cable tie
- Weight including packaging, 49g/1.73oz
- EAN13 Barcode on the packaging
- Lightweight packaging
- Easy to use
- RoHS, REACH, and California Prop65 Certified
-
SKU# DMXTENDERDMXtender A mountable sturdy CAT-5 cable extender DMXtender makes it possible to connect two CAT-5 cables together. The DMXtender can be mounted on a DIN rail, lighting rig, wall, etc. The sturdy design of the DMXtender makes it suitable for professional use. Together with the CPoint XLR-RJ45 adapter, a DMX512 network can be built very quickly and at a very low cost. With the CPoint DMXcompander, you can run 1536 channels in one CAT5 cable. Product Features- Use to connect two CAT-5 cables together to make a cable extension
- Gold-plated pins on RJ45 connectors
- Sturdy molded housing with non-slip grip
- Mountable on a DIN rail, lighting rig, wall, etc.
- Mountable with 5mm/0.2” screws or cable tie
- Weight including packaging, 28.4g/1.00oz
- EAN13 Barcode on the packaging
- Lightweight packaging
- Easy to use
- RoHS, REACH, and California Prop65 Certified
- Wall Mount
- Rail Mount
- Rig Mount
-
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# NC4FP-1TECHNICAL DATA Electrical- Number of contacts: 3 - 7 (except MP: 3-6)
- Rated voltage: 50 V ac
- Contact resistance: < 5 m
- Insulation resistance - initial: > 2 G
- - after damp heat test: > 1 G
- -IEC 68-2-30)
- Dielectric strength: 1500 V dc
- Rated current:
- 3 pole: 16 I [A], 2.5/14 mm2/AWG, ≤ 4 C
- 4 pole: 10 I [A], 1.5/16 mm2/AWG, ≤ 7 C
- 5 and 6 pole: 7.5 I [A], 1.0/18 mm2/AWG, ≤ 7 C
- 7 pole: 5 I [A], 1.0/18 mm2/AWG, ≤ 9 C
- Lifetime: > 1000 mating cycles
- Insertion / withdrawal force: ≤ 20 N
- Retention method (Female versions only): - standard: latch lock
- "-0" version: retention spring
- Separating force: ≤ 20 N
- Shell: ZnAl4Cu1, gal Ni or black Cr plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: - female (3 pole): CuSn6
- female (4-7pole) & male: CuZn39Pb3
- Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
- Latch lock & spring: CK 67 steel, treated
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
-
SKU# NAC3FCBLockable cable connector, power-out, screw terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled SKU# NAC3FCB -
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3MPAChassis connector, power-in, 3/16'' flat tab terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3FCALockable cable connector, power-in, screw terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled
Quick Links:
SKU# NAC3FCA -
-
-
-
-
SKU# SE-SFXXXXXXSIRS-E® Surface Mount Aluminum Extrusions Material: Aviation 6063-T5 Aluminum Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# SE-RSXXXXXXSIRS-E® Recessed Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# SE-CRXXXXXXSIRS-E® CR-3030S Corner Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# SE-DWXXXXXXSIRS-E® Plaster-In Drywall Mount Aluminum Extrusion Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# SE-XXXXXXSIRS-E® Aluminum Flat & Angle Bar Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet -
SKU# SE-SP5532_2SIRS-E® Suspended Aluminum Extrusion. Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Included Accessories- 1 Opal Diffuser
- 2 End caps
- 2 Clips
- Suspended wire (Optional)
- Vertical
- Horizontal
-
SKU# SE-FX13-1FThe outdoor mounting channel offers a permanent solution for attaching SIRS-E®’s outdoor waterproof versions of LED flexible tape lighting to surfaces that are less than ideal for typical adhesive use. Aside from the included 3M VHB adhesive on our LED tape lighting, this durable and flexible silicon channel is used in situations where regular adhesives can deteriorate over time and is resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED tape mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: This item is sold by the foot Video: LED Strip Light Extrusion Flexible Silicone IP68 Outdoor Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: Direct DMX RGB/RGBW Series AcuHue™ CV RGBW Series AcuVibrant™ CV RGB Series AcuVivid™ CV White Series -
SKU# SE-FX19-1FThe Outdoor “CC” Mounting Channel offers a permanent solution for attaching SIRS-E® waterproof rated AcuHue™ CC series of LED tape lighting to surfaces that are less than ideal for adhesive use. Aside from the included 3M VHB adhesive on our LED strips, this durable and flexible silicon channel is used in situations where regular adhesive can deteriorate over time. Resistant to UV, salt, and general weather conditions. This product offers a safe and reliable alternative for LED strip mounting by mechanical means. This durable and flexible silicone extrusion can be mounted by simply driving screws (or nails) through the inner molding and out the backside onto the surface of choice. Once the clear extrusion is fastened into place, simply pop in your outdoor rated LED tape lighting with the LED diodes facing outward. 19mm Flexible Outdoor LED Strip Extrusion, 80+/-5 Clear Silicone, 1ft, Tolerance: RMAE2 Heavy duty industrial staples can also be used for mounting this extrusion to the desired surface. Please Note: Item is Sold by the foot Downloadable Documentation: Outdoor Mounting Channel Datasheet Compatible IP68 Tape Lighting: AcuHue™ CC RGBW Series -
SKU# Klus-B5554Tech Specs:- Color: Silver
- Material: Aluminum
- Compatible with Covers: KLUS-17011
- Length: 1m (3.28') or 2m (6.56')
- Mounting Options: double sided mounting tape, mounting glue, or screws
- Certification: CE, UR
- 5050 RGB, 5050 RGBW, 5050 DMX, 5050 Waterproof, or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This include Cove, Edge and Contour lighting.
- Easy installation dedicated for room- and deco-light!
-
SKU# Klus-B1888Tech Specs:- Color: Silver
- Material: Aluminum
- Length: 1m (3.28') or 2m (6.56')
- Compatible with Covers: KLUS 1547,KLUS 1548
- Mounting Options: Double Sided mounting tape, KLUS 1072
- Certification: CE, UR
- 5050 RGB or 5050 White variants
- 3528 Single Color or 3528 White variants
- 3528 Waterproof variants
- Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This includes Cove, Edge and Contour lighting.
- Easy installation dedicated for room-and deco-light!
-
-
SKU# LED-PIXEL-12Features:- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-12
- Operating Voltage: DC 24V
- Max Current: 3.6W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: SMD RGB 5050
- Total LEDs: 3
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: Self Address
- Viewing Angle: 360°
- Weight: 264g
- 104mm x 104mm x 83mm
- 4.09in. x 4.09in. x 3.26in
ShopMark Eviota2024-04-02T12:17:21-05:00
