-
SKU# DMX-TUBE-PROGTech Specs:- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# LED-WIRE-RGBW-20- RGBW LED Strip Wire
- 20 AWG RGBW 5 Wire Conductors Cable
- Hook-up Wire Black, Green, Red, Blue, White
- For RGBW (RGB + White, RGB + Cold White, RGB Warm White ), RGBA (RGB + Amber) or any 4 Colors LED Strips.
-
SKU# LED-WIRE-RGB-XX- RGB LED Strip Wire
- 20-22 AWG RGB 4-5 Wire Conductors Cable
- hook-up Wire Black, Blue, Red, Green, White
- for RGB or any 3 Colors LED Strips.
-
SKU# LED-PS05V-30W-ULImportant Features:- High efficiency, up to 85.5%
- Protection against short circuit, over current, over voltage and over temperature
- Class I power unit, with FG
- UL Listed, suitable for dry and damp locations
- 3 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-TUB-XX3M™ Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all tubing is split resistant, mechanically tough, easily marked and resists cold flow. Typically used as a shrink-fit electrical insulation over cable splices and terminations. Great for use with 5050 LED Strip leads. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Please Note: This item is sold Per Feet SKU# LED-TUB-XX -
SKU# POCKET-CONSOLEBasic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:- Optional Pelican Cases are available
- small, lightweight, portable and designed to be hand held
- Levels are set using eight faders (slider pots)
- Each FADER has an associated bump button
- 512 dimmer addresses are patchable to any of the eight faders
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90 day warranty
- Basic Pocket Console User Manual
- Playback 8 Pocket Console User Manual
- dmXact Pocket Console User Manual
- MultiPatch Pocket Console User Manual
- 24-Eight Pocket Console User Manual
-
SKU# XSH-HYBRID-SERIESThe XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.- LED Display; signal, power
- Optical isolation prevents signal disturbances
- Clean and clear amplification of DMX and RDM signals
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC - 276VAC
- Input DMX, 5 Pin XLR or 3 Pin XLR
- Box version: M10 & M12 thread for a clamp an eye bolt for safety line
- Dimensions; Rack LxWxH: 19"x134mmx1Unit
- Powercon input (1pcs)max 20A
- Powercon output (4pcs)max 20A
- Power measurement 2-20 A in 2 A steps
-
SKU# XRC-CT15b15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.- Remote control of the XRC-200
- Connection through a RJ45 cable (not included)
- Powered by the XRC-200
- 15 contacts
- GND and VCC
- LED connection control
-
SKU# XRC-200-WAn easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# XRC-200An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# XND-4The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features- Art-Net to DMX converter for 4 independent universes
- Supports Art-Net I, II and 3
- 4 individually optically isolated DMX outputs
- Graphic display and encoder knob for easy configuration and precise status information
- Quick access button for each DMX output port for quick selection of ArtNet universe
- Neutrik powerCON input and output
- Universal power supply
- Control light shows from an Art-Net capable lighting desk
- Control lighting fixtures using an Art-Net enabled PC software or a mobile device
- Merge the light controlling data sent from two Art-Net controllers
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
ShopMark Eviota2024-04-02T12:17:21-05:00
