Name: SIRS Electronics, Inc.
Address: 3307 West Street, Rosenberg, Texas, 77471

Best Boy 2 Pocket Console DMX with Playback-8 Dimmer Tester

SKU# Best-Boy-2-Pocket-Console
The Baxter BEST BOY-2™ Pocket Console® is the source for the TOUGHEST, smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console ever made for your hands. FEATURES

Levels are set using eight faders (slider pots)

Up to 8 Sub-master scenes can be recorded

Each FADER has an associated bump button

Flushmount power and DMX I/O receptacles are on the side of the 1060 case

The faders are patchable using from 0 to 512 dimmer addresses per fader

The unit is powered by a 9v battery OR by a 120v AC power supply

Built to take it in an armored case with an etched faceplate

TECHNICAL SPECIFICATIONS:

9 Volt Alkaline Battery Life – 3 hours minimum

120v AC adapter

Number of DMX dimmer addresses supported – 512

Number of Faders – 8 with bump buttons

Data output – DMX-512 1990 standard

Data Speed: 44hz

Comes with instructions & 90-day warranty

BCI - Baxter Controls, Inc
Details
Product Inquiry
Pharos Expert Hardware

SKU# XPC-1
PHAROS In stock and ready to ship! Video: Pharos Expert Quick Presentation by SIRS-E High Quality DMX Touch Screen With the reliability you expect from Pharos and the expertise in dynamic lighting in architecture and entertainment: an easy to install, easy to use control solution. XPC 1 - Expert Control 1 (Lighting controller with 512 channels eDMX/DMX, DALI, IO) XPC 2 - Expert Control 2 (Lighting controller with 1,024 channels eDMX/DMX, DALI, IO) XPR - Expert Repeat (DMX Splitter with 1 in, 4 out, 24V DC) XPS - Expert Switch (Unmanaged PoE Ethernet switch with 4 Port, Class 2 PoE, 24V DC) XPT 5 W - Expert Touch 5 White (5” wall mount touchscreen interface) † *

5 Year Warranty

Installer Friendly

Reliability

Free Software
Details
Product Inquiry
CPoint RJ45 DMX Terminator 120 Ohm

SKU# RJ45-DMXTERM-120-XX

RJ45-DMXTERM-120 or RJ45-DMXTERM-120-2U is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable.

Details

Product Inquiry
CPoint XLR DMX512 Terminators 120 Ohm

SKU# XLR3-TERM XLR5-TERM
DMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES

A 120 Ohm DMX512 Terminator in an XLR connector

Two XLR versions available, male 3-pin or male 5-pin

Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment

Use to avoid data signals being reflected from the end of the data cable

Very robust, rugged molded housing with non-slip grip

Product Weight (including packaging): 31g / 1.1oz

Gold-plated pins on the connector

Easy to use

Low cost

RoHS, REACH, and California Prop65 Certified
Details
Product Inquiry
CPoint DMXcompander RJ45 DMX Compander 3 DMX Universes

SKU# DMXCOMP
DMXcompander RJ45 DMX Compander 3 DMX Universes Over 1 CAT5 Cable DMXcompander makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data pairs, one pair is used as the 0V reference and the other three pairs are used for DMX512 Data+ and Data-. Through the three RJ45 connectors on the DMXcompander, three DMX512 Universes are "COMpressed" into one CAT-5 cable through the Universe 1+2+3 RJ45 connector. At the other end of the CAT-5 cable, another DMXcompander can be used to "exPAND" the DMX512 Universes again, making them available through the three RJ45 connectors. Together with CAT-5 cables and CPOINT's XLR RJ45 adapters, a DMX512 network can be set up very quickly and at a very low cost Product Features

Three DMX512 Universes (1536 channels) combined into one CAT-5 cable

RJ45 connectors are used for connection with inexpensive CAT-5 cables

Gold-plated pins on RJ45 connectors

Sturdy molded housing

Mountable on DIN rail

Mountable in the lighting rig

Use as a flexible DMX outlet

Mountable with 5mm/0.2” screws or cable tie

Weight including packaging, 49g/1.73oz

EAN13 Barcode on the packaging

Lightweight packaging

Easy to use

RoHS, REACH, and California Prop65 Certified

Downloadable Documentation: Fact Sheet CPOINT DMXcompander
Details
Product Inquiry
CPoint DMXtender Robust Mountable CAT5 Cable Extender

SKU# DMXTENDER
DMXtender A mountable sturdy CAT-5 cable extender DMXtender makes it possible to connect two CAT-5 cables together. The DMXtender can be mounted on a DIN rail, lighting rig, wall, etc. The sturdy design of the DMXtender makes it suitable for professional use. Together with the CPoint XLR-RJ45 adapter, a DMX512 network can be built very quickly and at a very low cost. With the CPoint DMXcompander, you can run 1536 channels in one CAT5 cable. Product Features

Use to connect two CAT-5 cables together to make a cable extension

Gold-plated pins on RJ45 connectors

Sturdy molded housing with non-slip grip

Mountable on a DIN rail, lighting rig, wall, etc.

Mountable with 5mm/0.2” screws or cable tie

Weight including packaging, 28.4g/1.00oz

EAN13 Barcode on the packaging

Lightweight packaging

Easy to use

RoHS, REACH, and California Prop65 Certified

The DMXtender can be mounted in several different ways. Below are some suggestions for how the DMXtender can be mounted:

Wall Mount

Rail Mount

Rig Mount

Downloadable Documentation: Fact Sheet CPOINT DMXtender
Details
Product Inquiry
CQSA-E 1024 / PRO Ethernet to DMX Stand Alone Interface

SKU# CQSA-E
The new CQSA-E includes an Ethernet port in addition to the USB port. This gives long distance access and communication with the device anywhere on a Local network (LAN & WLAN) or on the Internet (via Web server). Connected to an access point or a router you have easy control with a mobile or tablet using the Wi-Light 2 APP. Same hardware features as the CQSA 1024 with ETHERNET port for Local Area Network. A 6-in-1 multiprotocol Stand Alone device featuring DMX playback, DMX In/Out, Art-Net Out, sACN Out, Node (Art-Net to DMX decoder), and Splitter, the CQSA-E is a versatile and essential tool designed to meet the needs of the widest array of lighting projects, Live performances and installations. FEATURES

Live and Stand Alone - Outstanding functionality and reliability for both live show control and permanent installations of lighting

Ethernet LAN / WLAN - Scalable, up to 128 connected interfaces via Ethernet. Remote communication anywhere on the network

ART-NET and sACN - Broadcast/multicast to 8 Art-Net/sACN universes from a micro SD card over Ethernet in Stand-alone

NODE - ART-NET Decoder - Art-Net to DMX decoder and converter translates Art-Net data and outputs DMX signals via 2 DMX ports

DMX - 2×512 DMX outputs per interface. Split, Merge, Trigger, Record DMX data via our softwares
Details
Product Inquiry
Madrix Orion

SKU# Orion

Have you ever thought about luring people into the store/club/ride by letting them interact with the lighting? As a general-purpose input device, MADRIX ORION fits right in. Transform your next project by introducing interactive elements. How about a convenient button? How about a motion sensor? Connect switches, potentiometers, and triggers. Include sensors for light, temperature, passive infrared, and more. Integrate building automation and home automation. 8 versatile inputs receive analog signals from 0 V – 12 V. Converted into 8-bit or 16-bit digital DMX, MADRIX ORION outputs Art-Net or Streaming ACN over Ethernet network. The MADRIX ORION is specifically designed as a general-purpose input device for analog input and Ethernet-based output for remote control and interactivity. Made in Germany 5 year Warranty Eco Sustainability Downloadable Documentation: Madrix Orion Datasheet Madrix Orion User Manual Madrix Orion Technical Manual Drivers, Firmware, and More

Details

Product Inquiry
CQSA 512 / 1024 USB to DMX Stand Alone Interface

SKU# CQSA
Thanks to its powerful Stand Alone mode, the CQSA is the definitively perfect DMX controller for all type of entertainment and architectural projects. It can play 1 to 5 Zones (scene) at a time without a computer. Hardware is compatible with LED Player, Pro DMX and Studio DMX software, so the interface is suitable for all Live applications and fixed installations. The interface can play black a complete project without PC and the new additional SD card slot gives the possibility to extend the memory capacity. The Splitter mode can make your installation more reliable and the USB interface offer more triggering possibilities. Users can customize the interface functions and modes, it is possible to choose what mode to activate or not in Stand alone from any of the available modes (Trigger, Page, Zone, Color, Dimmer, Speed) and load the modes of your choice in memory. FEATURES

Live and Stand Alone - 5 Zones for CQSA 1024 to play up to 5 different scenes/sequences at time in Stand Alone

RS232 - Can receive triggers and comands from RS232 devices in Stand Alone

Micro SD - Micro SD Card slot (Class 10, FAT format, up to 256 GB) or Internal memory with no SD card required)

DMX - 2×512 DMX outputs per interface. Split, Merge, Trigger, Record DMX data via our softwares
Details
Product Inquiry
S-PLAY Smart Light Show Controller

SKU# 70092

The revolutionary smart show controller for hassle-free, professional light shows and automated projects. Engineered for projects that require precise automation, the S-PLAY smart light show controller is your all-in-one solution for the creation, recording, triggering, and activation of not only light shows but video, non-lighting events, and much more. Play back multiple shows simultaneously and install it virtually anywhere with flexible mounting options. Downloadable Documentation: Datasheet User Manual OSC API HTTP API TouchOSC Guide Remote Access Guide Specification Firmware: Firmware v2.1.1 Release Notes

Details

Product Inquiry
DIN Ethergate

SKU# 71030

Next-generation Ethernet to DMX/RDM gateway The DIN Ethergate is a robust and reliable, installation-grade, Ethernet to DMX converter that has been engineered to connect physical DMX devices to your Ethernet network infrastructure. Now you can expand your network entertainment project to the next level. With two Universes of bi-directional eDMX to DMX conversion with Art-RDM support, the DIN Ethergate is compatible with a wide range of devices and allows for fast deployment of your DMX system. Simply connect, configure and take control! In addition, this Ethernet to DMX/RDM gateway is packed with installer-friendly features for fast installation and configuration, all managed through the user interface. All contained within a compact and electrically-insulated 4-DIN-module width unit form factor. With 2 universes of bi-directional eDMX to DMX conversion with ArtRDM support, power over ethernet (PoE) or flexible 12-24v DC input, the DIN Ethergate allows for fast deployment of DMX systems. Downloadable Documentation: Datasheet User Manual Product Specification Firmware V2.3 Release Notes Technical Drawing / Dimensions Note: DIN Ethergates manufactured before July 2022 with serial number 2361126 or lower (in hexadecimal) are not compatible with firmware V2.0 or higher. Please use the firmware below if you have a RevA hardware device. Firmware V1.2

Details

Product Inquiry
ODE Mk3

SKU# 70407

The ultimate Power Over Ethernet DMX interface The ODE MK3 is a robust, reliable, installation-grade, Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With two Universes of bi-directional eDMX to DMX conversion and Art-RDM support, the ODE MK3 is compatible with a wide range of devices and allows for fast deployment of your DMX system. Simply connect, configure and take control! Additionally, this Ethernet to DMX/RDM gateway is packed with installer-friendly features for a speedy installation and configuration, all managed through a web UI – and contained in a compact, portable form factor. With 2 Universes of Ethernet to DMX conversion featuring Art-RDM support, Power over Ethernet (PoE) or a flexible 12-24v DC input, the ODE MK3 allows for fast deployment of DMX systems compatible with a wide range of devices. Downloadable Documentation: Datasheet User Manual Technical Drawing Firmware V1.4 Release Notes

Details

Product Inquiry