SIRS-E Brand Overview
-
SKU# LED-PIXEL-IN-PW-64mmLED PIXEL 64mm Initial Power Waterproof Cable. -
SKU# LED-PIXEL-T-PW-64mmLED Pixel Power T-Cable Waterproof for 64mm Pixel. -
SKU# LED-PIXEL-T-INI-DMX-64mmLED Pixel Initial T-Cable, Waterproof for 64mm Pixel. -
SKU# DMX-TUBE-PROGTech Specs:- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# LED-PIXEL-TERM4LED Pixel Power Terminator for 4 Way cable 120 Ohms. -
SKU# LED-PIXEL-IN-PWLED Pixel Power Supply Cable, Waterproof, 2 Pin Male to Tips. Use this cable to connect your power supply to the initial cable LED-PIXEL-T-INI-DMX and in between the chain using LED-PIXEL-T-PW. -
SKU# RJ45-TERN-MK2Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2 -
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE -
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Build to order -
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
Features:1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet
