-
SKU# Rackmount-2The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:- DMX Output: Board mounted terminal block
- Optional FlushMount Faceplate 5 pin XLR available
- Data Output: DMX-512 1990 standard, 44Hz
- Memory: Non-Volatile Flash
- Number of Channels: 8 with Momentary BUMP buttons
- Patch: Fully independent 512 DMX to 1-8 Channels
-
SKU# LUNA-SERIESMadrix Luna Configuration Problems and Solutions If you’ve tried to configure your Madrix Luna thru Artnet using the Quick Start Guide and the software does not find the Luna. Then you may have to update the Luna’s firmware. To update the Firmware, connect the USB, close and open Madrix, then go to TOOLS/LUNA CONFIGURATION once Madrix detects your Luna, you highlight the unit and click “firmware”. Firmware update process should begin. This should fix ArtNet connectivity between Madrix and Luna. The MADRIX Luna family is made up of multi node DMX interfaces used for multiple universe installations. Available in 4, 8 and 16 universe configurations, the Luna is equipped with different modes and features. It can be used as an Art-Net device, allowing the user to convert DMX to Art-Net for projects that call for such application. It can also be used to distribute from 4 to 16 DMX universes with 1 DMX input depending on the Luna model you chose. For larger projects that call for more universes, multiple Lunas can be used. In MADRIX synch mode, the Luna allows you to synchronize Art-Net Data across 4-16 ports with no visual interruptions. The Luna is compatible with any third party Art-Net controller. Specifically designed by MADRIX, the Luna is the easiest multi node interface to configure. It is literally plug and play, and it is fully customizable as well. If settings need to be edited, it can all be easily done from the Device Manager section in the MADRIX software. High quality construction is what makes this interface reliable. Manufactured and designed in Germany, along with great customer support the Luna will definitely get the job done right the first time around. Made with only the highest quality components, the MADRIX Luna is designed to last. The Lunas have the standard rack dimensions, for easy rack installation and configuration. If a project calls for multiple Lunas, they can all be incorporated in a rack to neatly keep everything in place. With different status lights, and high quality Neutrik connectors, the MADRIX Luna will keep the show going in an effortless manner. The MADRIX Luna can also be used as a simple DMX to USB interface. It comes with a USB cable, making it a very versatile product capable of achieving many different styles of operation, from the most basic, to the complex. No matter if your set up is large scale or a smaller installation, the Luna will make the configuration a lot easier. There is very little programming to be done since it was specifically designed to work with MADRIX. Whether you are looking for high grade professional equipment that will not let you down, or you are just starting off in the lighting industry and you are looking for a simple, plug and play alternative to an otherwise complicated set up, the MADRIX Luna is ready to undertake any task, no matter the magnitude. Here at SIRS-E we stand by the products we represent and we want to give you the best experience possible. We know our products very well, and we want you to succeed in your next DMX lighting operation. Quick Links:- Madrix Product Brochure
- Madrix Luna User Manual
- Madrix Luna Quick Start Guide
- Madrix LUNA 4/8/16 Driver
-
SKU# XRC-200-WAn easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# XMG-51The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.- 5 DMX512 inputs
- 1 DMX512 output
- Only 50us latency
- Bypass relay
- Manual switch
- HTP, LTP channel, LTP line Modes
- Channel offset for each input
- Connect up to 5 lighting desks into one DMX-512 line
- Fast uplink port with only 0.00005 second delay
- Manual access
- Channel offset for each port
- Switch mode for backup
- HTP merge mode (Highest Takes Precedence)
- LTP merge mode (Last Takes Precedence)
- HTP or LTP for each channel
- Overwrite by priority
- Optical isolated
- Works on worldwide power supplies, 85V up to 267V
-
SKU# XRC-CT15b15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.- Remote control of the XRC-200
- Connection through a RJ45 cable (not included)
- Powered by the XRC-200
- 15 contacts
- GND and VCC
- LED connection control
-
SKU# XRC-200An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
- Record and play back 64 sequences
- 10 configurable play lists
- Configurable fade times
- Optional 15 control inputs
- 2 DMX inputs
- 2 DMX outputs
- Built-in timer
- Backup device
- USB connection for firmware update, and PC software
- PC software for uploading, downloading and storage of shows
- Exact 100% record and replay of complex lighting movements and lighting sequences
- All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure
- The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons
- Can be connected to a timer
- Keyboard lock function
- Wall mount
- 2 universe input/2 universe output
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
-
Out of stock
SKU# PELICAN-CASEPelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!- Interior (L x W x D): 8.5" x 5.88" x .75"
- Exterior (L x W x D): 9.28" x 7.56" x 4.35"
- Weight: 2.1 lbs
- Includes Pluck-’n-Pick foam set
- Carry handle, Waterproof, Lockable
- Room for AC adapter and/or spare batteries
- Comes in Black only
- Interior (L x W x D): 8.25" x 4.25" x 2.25"
- Exterior (L x W x D): 9.37" x 5.56" x 2.62"
- Weight: 1.03 lbs
- Padded interior
- Waterproof
- Room for AC adapter
- Comes with Carabiner
- Comes in black only
-
SKU# XMT-120AIncludes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel tracer
- Dip-switch display
- Programmable sequence
- Timing analyzer
- Adjustable DMX frame rate
- PC software
- And more
-
SKU# DMX-CON4-C2This new edition of the DMX-CON4 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 4 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# RJ45-TERN-MK2Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2 -
SKU# LED-PS12V-80W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# ST-DIO588PCB Module connects to the CuesStation 5-Wire network and provides 8 contact closure inputs and 8 digital outputs SKU# ST-DIO588 -
Out of stock
SKU# 70314The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO- Dual, fully independent, DMX ports each with full RDM capability
- MIDI input and output ports
- Standalone operation for unattended replay of lighting shows (limit 1 universe)
- One firmware version supports all features
- Aesthetically slim-profile, machined aluminium box
- True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
- Internal frame buffering (preserve data integrity when computer is busy)
- Works at various communication speeds
- Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
- Stores configuration and user data in EEPROM
- Refresh rate configurable from 1 to 40Hz
- Break time configurable from 96uS to 1.3mS
- MaB time configurable from 10.6uS to 1.3mS
- Upgradeable firmware
- Security / software protection API
- Comes with USB and break out cables
- USB Cable
- Break Out Cable (79146 - DB15 to 3DMX)
-
SKU# 5050-CON-C4WC4- Connector for 5050 LED RGB strip to strip
- 10mm wide
- 12 in long wire
-
SKU# 5050-CON-C4W- 5050 RGB LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C4W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C4W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of an 5050 RGB SMD LED Strip
-
SKU# 5050-CON-C4C45050 RGB LED Strip Bridge Coupler (Quick Connect), 10mm wide. Used to join 5050 RGB SMD LED Strips together. SKU# 5050-CON-C4C4 -
SKU# 5050-CON-C2WC2- 5050 White LED Strip Extension for Single Color Strips
- Connects to a single color 5050 LED strip-to-strip
- 10mm wide
- 12 in long wire 20AWG
- Use for Neutral White, Warm White, Cold White and any other single color 5050 SMD LED Strip
-
SKU# 5050-CON-C2W- 5050 White LED Strip Coupler (Quick Connect) with Lead wires or Tail wires
- The 5050-CON-C2W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C2W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 White LED Strip
-
SKU# 5050-CON-C2C25050 White LED Strip Bridge Coupler (Quick Connect), 10mm wide. Used to join 5050 White SMD LED Strips together. SKU# 5050-CON-C2C2 -
SKU# LED-PIXEL-TERM4LED Pixel Power Terminator for 4 Way cable 120 Ohms. SKU# LED-PIXEL-TERM4 -
SKU# LED-PIXEL-T-PW-64mmLED Pixel Power T-Cable Waterproof for 64mm Pixel SKU# LED-PIXEL-T-PW-64mm -
SKU# LED-PIXEL-T-INI-DMX-64mmLED Pixel Initial T-Cable, Waterproof for 64mm Pixel. SKU# LED-PIXEL-T-INI-DMX-64mm
ShopMark Eviota2024-04-02T12:17:21-05:00
