-
SKU# NEUTRIK-XX-33 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.SKU# NEUTRIK-XX-3- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well proteced against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
-
-
SKU# DMX-CON6The DMX-CON6 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 6 amps max per channel @ 12V DC with a total power of 432W and @ 24V DC with a total power of 864W. This LED Decoder provides you with the freedom to control 6 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Decoder
- 6 output channels, max 6A per channel.
- 864W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON6
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-6 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON4V2The DMX-CON4V2 DMX decoder was made with our A-Grade RGBW LED Strips in mind. This particular decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 10 amps per channel at 12V DC with a total power of 480W and at 24V DC with a total power of 960W. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:- DMX 512 LED Controller
- 4 output channels, max 10A per channel
- 960W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4V2
- Meets DMX512/1990
- 256-levels of brightness, full-color with driver controls
- Can handle the high amp draw of RGBW Strips
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-5RGB-34XXSIRS-E® Direct DMX RGB LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, and blue diodes can be mixed to potentially produce over a million color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGB Full Info Pack
- DMX LED Strip Brochure
- DMX RGB Datasheet
- DMX RGB IES File (zip)
- DMX RGB Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
Out of stock
SKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011 -
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012
ShopMark Eviota2024-04-02T12:17:21-05:00
