-
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# LED-WIRE-RB-XXHook-Up Wire Red & Black, is especially used to connect LED power supply and LED controller. Red/Black Zip Cord is a low voltage DC power cable. Also called zip wire and bonded wire, the cables pull apart for a quick separation. Easy to identify polarity for DC applications. Excellent for Single Color or white LED Strips, Amateur Radio, Automotive/Stereo, Robotics and R/C.- Wire 14 AWG: Used for short to mid distances
- Wire 16 AWG: Used for short to mid distances
- Wire 18 AWG: Used for short distances
- Wire 20 AWG: Used for short distances
- Designed to meet UL VW-1 Vertical Wire Flame Test
- RoHS Compliant
-
SKU# DMX-TUBE-PROGTech Specs:- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# LED-PS05-60W-ULImportant Features:- Input: 88-264VAC
- Efficiency: 79%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Maximum Output Power: 60 W
- Output Voltage: 5 V
- Output Current: 12 A
- Output Connector Type: Screw Terminal Block
- Size: 5"L x 3.8"W x 1.5"H
- Weight: 1 lb.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 24 V
- Output Current: 18.8 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-320W-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 95%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 320.0 W
- Output Voltage: 24 V
- Output Current: 13.3 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-260W-ULImportant Features:- Protections: Short circuit / Overload / Over voltage/Over temperature
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC, 127 VDC to 431 VDC
- Maximum Output Power: 264 W
- Output Voltage: 12 V
- Output Current: 22 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS05V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 200 W
- Output Voltage: 5 V
- Output Current: 40 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-90W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-80W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 12 V
- Output Current: 37.5 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS05V-30W-ULImportant Features:- High efficiency, up to 85.5%
- Protection against short circuit, over current, over voltage and over temperature
- Class I power unit, with FG
- UL Listed, suitable for dry and damp locations
- 3 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# XND-4The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features- Art-Net to DMX converter for 4 independent universes
- Supports Art-Net I, II and 3
- 4 individually optically isolated DMX outputs
- Graphic display and encoder knob for easy configuration and precise status information
- Quick access button for each DMX output port for quick selection of ArtNet universe
- Neutrik powerCON input and output
- Universal power supply
- Control light shows from an Art-Net capable lighting desk
- Control lighting fixtures using an Art-Net enabled PC software or a mobile device
- Merge the light controlling data sent from two Art-Net controllers
-
SKU# XAC-CASE-BOXNylon case for Swisson Box size products. SKU# XAC-CASE-BOX -
SKU# XAC-ANT-2.4Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4
-
SKU# SWISSON-XWL-TR- XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
- XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
- XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
- XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
- XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
- XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.
All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.
- Wireless DMX receiver (XWL-R models)
- Wireless DMX transmitter (XWL-T models)
- Available with W-DMX™ or CRMX™
- M10/M12 threads for truss mount
- 3/8” thread for mounting on a microphone stand
- Built-in power supply (powerCON connected)
- Compact, rugged housing
-
SKU# RJ45-OPTO-SPLITTERThe Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.- ETL/cETL/CE certified
- Switch for RDM & DMX or DMX only
- LED display; signal, power, RDM
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX and RDM protocol supervisor
- Clean and clear amplification of DMX and RDM signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
-
SKU# XSR-RDM-OPTO-SPLITTER-5SWISSON-XSR-5B5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Box is ideal for limited space and is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-5R5-5R5-US: The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin Out XLR Double Rack includes flanges for easy mounting, two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs.- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-OPTO-SPLITTER-TERMINALThe RDM & DMX Opto-Splitter is a convenient, less expensive way to build a permanent fixture. The terminal ports allow the user to directly connect into the hardwire of a device, instead of spending extra money on other connecters. SWISSON-XSR-IB5-W-US: The RDM & DMX Opto-Splitter Terminal Box with Wall Mount is a compact structure with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-US: The RDM & DMX Opto-Splitter Terminal Single Rack includes built in flanges for mounting, 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-XSR-TR5-TR5-US: The RDM & DMX Opto-Splitter Terminal Double Rack is equipped with flanges for easy rack mounting, 2 input terminals, 2 through terminals, and 10 output terminals.- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-OPTO-SPLITTER-MIXThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-RDM-OPTO-SPLITTERThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. SWISSON-XSR-3B-US: RDM & DMX Opto-Splitter Box containing one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-3R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs. SWISSON-XSR-5B-US: RDM & DMX Opto-Splitter Box containing one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-5R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs.
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
-
SKU# XPD-DMX-AB-SPLITTER-MIXXPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R8-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 3-pin XLR XPD-28-5R2-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 6 x 5-pin XLR and 2 x 3-pin XLR XPD-28-5R4-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 4 x 5-pin XLR and 4 x 3-pin XLR XPD-28-5R6-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 2 x 5-pin XLR and 6 x 3-pin XLR Features
- OLED display.
- Metal button/ potentiometer
- Amplifies/ boosts DMX
- Splits and cleans DMX signal
- RDM Protocol
- Enhanced DMX data regeneration
- Individual optical isolation on all ports
- Realtime DMX monitoring
- DMX Framerate display
- DMX channel overview
- 19″ Rack mountable
ShopMark Eviota2024-04-02T12:17:21-05:00
