-
SKU# StripLockStripLockTM wire lead connectors are used for going around corners or, when cut in half, to create two power leads or jumper cables to bridge gaps in order to get LED lighting to other areas. StripLockTM splice connectors are used to join two strips, creating a continous run of LED lighting. -
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET SKU# RJ45-MK2-5 -
SKU# RJ45-6F-MK2Heavy Duty CAT5, RJ45 to RJ45, 6ft long Cable by SIRS-E Length: 6ft Connector: RJ45 Made in USA Quick Links: SKU# RJ45-6F-MK2 -
SKU# PC-4FReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life.- Length: 4 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to 3 wire
- Design: Male connector plugs into standard outlet; bare wires for AC connection of power supplies, and other devices that require hardwired AC power
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
-
SKU# PC-6SFReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life. Specifications:- Length: 6 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to two 3-pin shroud female(IEC-320-C13)
- Design: Female connectors plug directly into device and male connector plugs into standard outlet
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
- Connects computer to wall outlet
- Stranded unshielded PC or monitor power cable.
- 110/120 volt
- Ideal when you are running out of space on your power/surge protector or wall outlets
SKU# PC-6SF -
SKU# LED-WIRE-RB-XXHook-Up Wire Red & Black, is especially used to connect LED power supply and LED controller. Red/Black Zip Cord is a low voltage DC power cable. Also called zip wire and bonded wire, the cables pull apart for a quick separation. Easy to identify polarity for DC applications. Excellent for Single Color or white LED Strips, Amateur Radio, Automotive/Stereo, Robotics and R/C.- Wire 14 AWG: Used for short to mid distances
- Wire 16 AWG: Used for short to mid distances
- Wire 18 AWG: Used for short distances
- Wire 20 AWG: Used for short distances
- Designed to meet UL VW-1 Vertical Wire Flame Test
- RoHS Compliant
-
SKU# LED-WIRE-RGB-XX- RGB LED Strip Wire
- 20-22 AWG RGB 4-5 Wire Conductors Cable
- hook-up Wire Black, Blue, Red, Green, White
- for RGB or any 3 Colors LED Strips.
-
SKU# LED-WIRE-RGBW-20- RGBW LED Strip Wire
- 20 AWG RGBW 5 Wire Conductors Cable
- Hook-up Wire Black, Green, Red, Blue, White
- For RGBW (RGB + White, RGB + Cold White, RGB Warm White ), RGBA (RGB + Amber) or any 4 Colors LED Strips.
-
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# DMXN20-3LHigh Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L -
SKU# DMXN01High Quality hand made cable. Invert polarity from pin 2 to pin 3. -
SKU# DMX-4CSXP-22XX-XXThe SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications
-
-
SKU# 3X-5XFree Ground Shipping. 70029: DMX Adapter 3 Pole Female to 5 Pole Male Wired 1 to 1, 2 to 2, 3 to 3, 4 and 5 Not Connected. 70030: 5 Pole Female to 3 Pole Male Adapter Wired 1 to 1, 2 to 2, 3 to 3, 4 and 5 Not Connected. -
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# AD-PRO-6-PSTech Specs:- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# AD-PRO-6-BKTech Specs:- 1 - DB-15 Male Connector
- 6 - 5 Pin XLR Female Neutrik Connectors
- Length: 19"
- Color: Black (white XLR cable segments)
- Made with High Quality Horizon Cable
- Made with High Quality Neutrik Connectors
- Complies with DMX512 USITT standards
- Made in the USA.
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10 -
SKU# DMX-TUBE-PROGTech Specs:- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# 5050-CON-C5C55050 RGBW LED Strip Bridge Coupler (Quick Connect), 12mm wide. Used to join 5050 RGBW SMD LED Strips together. SKU# 5050-CON-C5C5 -
SKU# 5050-CON-C5WC5- Connector for 5050 LED RGBW strip to strip
- 12mm wide
- 12 in long wire
-
SKU# 5050-CON-C5W- 5050 RGBW LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires
- 12mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
