Out of stock
Pelican Protective Cases

SKU# PELICAN-CASE
Pelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!

Interior (L x W x D): 8.5" x 5.88" x .75"

Exterior (L x W x D): 9.28" x 7.56" x 4.35"

Weight: 2.1 lbs

Includes Pluck-’n-Pick foam set

Carry handle, Waterproof, Lockable

Room for AC adapter and/or spare batteries

Comes in Black only

Hard Case: PELICAN-CASE-SMALL Reliable protection for any small electronic you may have!

Interior (L x W x D): 8.25" x 4.25" x 2.25"

Exterior (L x W x D): 9.37" x 5.56" x 2.62"

Weight: 1.03 lbs

Padded interior

Waterproof

Room for AC adapter

Comes with Carabiner

Comes in black only

SKU# PELICAN-CASE
Details
Out of stock
DMX Tester & Terminator 5 Pin XLR

SKU# DMX-TEST-02
Free Ground Shipping.
The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:

Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.

Red LED: If you see red only then you have DMX signal problem such as inverse polarity.

No LED: If the LED is off then you have pin 2 or 3 cut off.

High Quality Material

Bicolor LED Diode

Genuine Neutrik XLR Male 3 Pin

DMX Adapter 3 Pole Female to 5 Pole Male 70029

120 ohms, 2 W Resistor Non-Flammable

Warranty: 1 Year
SKU# DMX-TEST-02
Details
Out of stock
DMX Tester & Terminator 3 Pin XLR

SKU# DMX-TEST-01
Free Ground Shipping.
The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.

How it Works

Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.

Red LED: if you see red only then you have DMX signal problem such as inverse polarity.

No LED: If the LED is off then you have pin 2 or 3 cut off.

High Quality Material

Bicolor LED Diode

Genuine Neutrik XLR Male 3 Pin

120 ohms, 2 W Resistor Non-Flammable

Warranty: 1 Year
SKU# DMX-TEST-01
Details
Heavy Duty RJ45 Signal Terminator for DMX Driver

SKU# RJ45-TERN-MK2
Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links:

RJ45 Signal Terminator Datasheet

SKU# RJ45-TERN-MK2
Details
Product Inquiry
CPoint DMXtender Robust Mountable CAT5 Cable Extender

SKU# DMXTENDER
DMXtender A mountable sturdy CAT-5 cable extender DMXtender makes it possible to connect two CAT-5 cables together. The DMXtender can be mounted on a DIN rail, lighting rig, wall, etc. The sturdy design of the DMXtender makes it suitable for professional use. Together with the CPoint XLR-RJ45 adapter, a DMX512 network can be built very quickly and at a very low cost. With the CPoint DMXcompander, you can run 1536 channels in one CAT5 cable. Product Features

Use to connect two CAT-5 cables together to make a cable extension

Gold-plated pins on RJ45 connectors

Sturdy molded housing with non-slip grip

Mountable on a DIN rail, lighting rig, wall, etc.

Mountable with 5mm/0.2” screws or cable tie

Weight including packaging, 28.4g/1.00oz

EAN13 Barcode on the packaging

Lightweight packaging

Easy to use

RoHS, REACH, and California Prop65 Certified

The DMXtender can be mounted in several different ways. Below are some suggestions for how the DMXtender can be mounted:

Wall Mount

Rail Mount

Rig Mount

Downloadable Documentation: Fact Sheet CPOINT DMXtender
Details
Product Inquiry
CPoint DMXcompander RJ45 DMX Compander 3 DMX Universes

SKU# DMXCOMP
DMXcompander RJ45 DMX Compander 3 DMX Universes Over 1 CAT5 Cable DMXcompander makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data pairs, one pair is used as the 0V reference and the other three pairs are used for DMX512 Data+ and Data-. Through the three RJ45 connectors on the DMXcompander, three DMX512 Universes are "COMpressed" into one CAT-5 cable through the Universe 1+2+3 RJ45 connector. At the other end of the CAT-5 cable, another DMXcompander can be used to "exPAND" the DMX512 Universes again, making them available through the three RJ45 connectors. Together with CAT-5 cables and CPOINT's XLR RJ45 adapters, a DMX512 network can be set up very quickly and at a very low cost Product Features

Three DMX512 Universes (1536 channels) combined into one CAT-5 cable

RJ45 connectors are used for connection with inexpensive CAT-5 cables

Gold-plated pins on RJ45 connectors

Sturdy molded housing

Mountable on DIN rail

Mountable in the lighting rig

Use as a flexible DMX outlet

Mountable with 5mm/0.2” screws or cable tie

Weight including packaging, 49g/1.73oz

EAN13 Barcode on the packaging

Lightweight packaging

Easy to use

RoHS, REACH, and California Prop65 Certified

Downloadable Documentation: Fact Sheet CPOINT DMXcompander
Details
Product Inquiry
CPoint RJ45 DMX Terminator 120 Ohm

SKU# RJ45-DMXTERM-120-XX

RJ45-DMXTERM-120 or RJ45-DMXTERM-120-2U is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable.

Details

Product Inquiry
CPoint XLR DMX512 Terminators 120 Ohm

SKU# XLR3-TERM XLR5-TERM
DMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES

A 120 Ohm DMX512 Terminator in an XLR connector

Two XLR versions available, male 3-pin or male 5-pin

Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment

Use to avoid data signals being reflected from the end of the data cable

Very robust, rugged molded housing with non-slip grip

Product Weight (including packaging): 31g / 1.1oz

Gold-plated pins on the connector

Easy to use

Low cost

RoHS, REACH, and California Prop65 Certified
Details
Product Inquiry
RJ45 XLR Adaptors (3-pin, 5-pin)

SKU# XLRJ45-XX
XLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation:

RJ45 XLR Adaptors Datasheet

SKU# XLRJ45-XX
Details
Product Inquiry
8 Pair DMX Wiring Cable – 24 AWG Snake Cable, Black

SKU# SN8-IJIS

COMMERCIAL STAGE CABLE PRICE IS PER FOOT 8 Pair w/shield, 24 AWG Snake cable, Black, Per Ft NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE

Details

Product Inquiry

2 Conductor DMX Wiring Cable w/ Braided Shield, 20 AWG

SKU# LO-Z5

PRICE IS PER FOOT High performance mic cable 20 gauge conductors with braided shield, Black, Per Ft Applications:

Heavy Duty Microphone Cable

Signal Cable

DMX

NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE SKU# LO-Z5

Details

Product Inquiry

2 Conductor DMX Wiring Cable w/shield – 24 AWG, Black

SKU# LO-Z1

2 Conductors With Shield 24 AWG

Details

Product Inquiry

2 Conductor DMX Wiring Cable – 22 AWG

SKU# LO-Z2

1000 ft reel of American made Microphone Installation Wire Color: Black SKU# LO-Z2

Details

Product Inquiry

2 Pair DMX Wiring Cable – 24AWG, Digital DMX512 Wire

SKU# DMX-2PR

Please Note: - Price is per foot. HORIZON - 2 Pair, 24AWG, Stranded bare copper, cellular polyethylene insulated, with overall shield and PVC jacket, digital(DMX512) wire. SKU# DMX-2PR

Details

Product Inquiry

ProDMX-CAB 4 Conductors 22 AWG Shielded DMX Cable

SKU# DMX-4CSXP-22XX-XX

The SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s):

Feature Video – DMX Cable Spool by SIRS-E Made in USA High Quality Waterproof and Non WP

Applications

DMX512 Lighting Control

Temporary or Permanent Installations

Stage Applications

Quick Links: ProDMX-CAB Brochure Datasheet: ProDMX-CAB Datasheet Waterproof IP65 DMX Cable ProDMX-CAB Datasheet Plenum UL DMX Cable

Details

Product Inquiry

SIRS-E XLR Polarity Changer

SKU# DMXN01

High Quality hand made cable. Invert polarity from pin 2 to pin 3.

Details

Product Inquiry

DMX Adapter XLR Gender Changer

SKU# XLR-GENDER

DMX Adapter XLR Gender Converters by SIRS-E

Details

Product Inquiry

DMX Adapter 3 Pin XLR to 5 Pin XLR

SKU# 3X-5X

Free Ground Shipping. 70029: DMX Adapter 3 Pole Female to 5 Pole Male Wired 1 to 1, 2 to 2, 3 to 3, 4 and 5 Not Connected. 70030: 5 Pole Female to 3 Pole Male Adapter Wired 1 to 1, 2 to 2, 3 to 3, 4 and 5 Not Connected.

Details

Product Inquiry

DMX 3 Pin XLR Neutrik 20 ft Cable

SKU# DMXN20-3L

High Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L

Details

Product Inquiry

SIRS-E High Quality Flexible DMX Cable, 5 Pin XLR

SKU# DMXN20-5D

High Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s):

Feature Video – DMX Cable Extensions Made in USA by SIRS-E

Main Features

High Quality & Heavy-Duty DMX Cable hand-made in the USA

DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.

Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.

5-Pin male & female connector with Nickel housing and silver contacts.

Rugged zinc Diecast shell, long-lasting and dependable.

Limited Lifetime Warranty

Technical Specifications

Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG

Conductor Material: Bare annealed copper

Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2

Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3

Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz

Length: 20ft

Weight: 14oz

Material Used

1 Neutrik NC5MXX

1 Neutrik NC5FXX

20 Feet DMX-2PR Digital DMX512 Wire

Documents

Datasheet

DMX-2PR

NEUTRIK Connector

NEUTRIK Datasheet

MADE IN USA SKU# DMXN20-5D

Details

Product Inquiry

Neutrik NC5MXX & NC5FXX Cable Connectors XLR5

SKU# NEUTRIK-XX-5

5 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster

Boot with polyurethane gland gives high protection to cable bending stresses

Colored rings and boots available for coding or identification

Sleek and ergonomic design - valuable and handy

Rugged zinc die-cast shell, long lasting and dependable

Internal thread on shell is well protected against any damage

Branded with unique hologram - guarantees genuine and authentic Neutrik product

NC5MXX: Male

Male connector with improved locking recess without "window", more stringent housing increases durability

NC5FXX: Female

Unique cage design of female contact for low contact resistance and high integrity

Female contact incorporates a solder barrier to prevent solder running into the contact mating area

Female connector with improved solid metal latch which is larger and easier to handle

Additional ground spring contacts for better shell ground continuity

SKU# NEUTRIK-XX-5

Details

Product Inquiry

Neutrik NC3MXX & NC3FXX Cable Connectors XLR3

SKU# NEUTRIK-XX-3

3 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster

Boot with polyurethane gland gives high protection to cable bending stresses

Colored rings and boots available for coding or identification

Sleek and ergonomic design - valuable and handy

Rugged zinc diecast shell, longlasting and dependable

Internal thread on shell is well proteced against any damage

Branded with unique hologram - guarantees genuine and authentic Neutrik product

NC3MXX: Male

Male connector with improved locking recess without "window", more stringent housing increases durability

NC3FXX: Female

Unique cage design of female contact for low contact resistance and high integrity

Female contact incorporates a solder barrier to prevent solder running into the contact mating area

Female connector with improved solid metal latch which is larger and easier to handle

Additional ground spring contacts for better shell ground continuity

SKU# NEUTRIK-XX-3

Details

Product Inquiry

9V AC Adapter for Baxter Consoles

SKU# Baxter-9VPS

Replacement adapter for Pocket Console^™. Tech Specs

Output voltage: 9 VDC

Output current: 200 mA

Output power: 1.8 watts

Output connector: 1.3mm x 3.5mm right angle female barrel plug

Polarity: Center positive

Size: 2.4"H x 1.7"W x 1.5"D

Case color: Black

Output cord length: 6 feet

Weight: 0.4 lbs

Agency approval: UL/CSA

Details

Product Inquiry

Baxter Pocket Console Rack Mount 2

SKU# Rackmount-2

The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:

DMX Output: Board mounted terminal block

Optional FlushMount Faceplate 5 pin XLR available

Data Output: DMX-512 1990 standard, 44Hz

Memory: Non-Volatile Flash

Operation:

Number of Channels: 8 with Momentary BUMP buttons

Patch: Fully independent 512 DMX to 1-8 Channels

Quick Links:

Baxter Rack Mount Instruction Manual

SKU# Rackmount-2

Details

Product Inquiry

1 2 … 5 Next