-
SKU# XSW-TR-SERIES2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.
- XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack
- XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack
-
SKU# XSP-OPTO-SPLITTER-5The DMX Opto-Splitter Terminal is equipped with seven terminal ports which allow the user to directly hardwire into a DMX device for permanent fixtures. With the terminal connectors, the user will save money by not having to purchase additional standard connectors. The DMX Opto-Splitter Terminals make it possible to connect directly into the hardware. SWISSON-XSP-5B5-W-US: The DMX Splitter Terminal Box with Wall Mount comes in a compact box configuration with a wall mount and is equipped with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-TR5-US: The DMX Splitter Terminal Single Rack has 1 input terminal, 1 through terminal, 5 output terminals and includes mounting flanges for a rack. SWISSON-XSP-TR5-TR5-US: The DMX Splitter Terminal Double has 2 input terminals, 2 through terminals, 10 output terminals and is rack mountable with the included flanges. The DMX Splitter Terminal Double Rack is essentially two single racks side by side.
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-5R2-USDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-MIXDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTERThe Swisson DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out, perfect for a user looking to connect another DMX input, without wasting an additional output on the splitter. SWISSON-XSP-5B5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Box is a compact box structure with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON-XSP-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON:XSP-5R5-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-SERIES-SPLITTERDMX splitters are the backbone of any DMX-512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. The XSP box models have a thread for a clamp and an eye for the safety line. These models are portable and suitable for truss mounting. The rack and double rack models are for 19“ rack systems. Customize your purchase by choosing from 3 Pin XLR or 5 Pin XLR inputs and outputs. XSP-3B: The DMX Opto-Splitter Box is equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R: The DMX Opto-Splitter Single rack is a mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B: The DMX Opto-Splitter Box is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R: The DMX Opto-Splitter Single rack is a mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs XSP-3B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC – 276VAC
- Input (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Through (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Outputs 5pcs, DMX, XLR 5 pin or XLR 3 pin
- Box version, M10 thread for a clamp and a eye bolt for safety line
- 2 year warrranty
-
SKU# SWISSON-DIN-RAIL
- ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- DMX splitter / booster
- DMX repeater
- LED display; signal, power, RDM
- Input optically isolated
- Each output individually optically isolated
- RDM support (optional)
- Extend DMX lines infinitely with the splitter
- Rugged metal housing
- Built-in termination
- RJ-45 and pluggable screw terminal variants
- DC power input, 10-48V DC, max. 400mA
- Isolation between input and outputs as well as full isolation between each output
- Dimensions: L=125mm, W=90mm, H=56mm
- 2 Year Warranty
-
SKU# SE-SP5532_2SIRS-E® Suspended Aluminum Extrusion. Material: Aviation 6063-T5 Aluminum. Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Included Accessories
- 1 Opal Diffuser
- 2 End caps
- 2 Clips
- Suspended wire (Optional)
- Vertical
- Horizontal
-
SKU# SE-SFXXXXXXSIRS-E® Surface Mount Aluminum Extrusions Material: Aviation 6063-T5 Aluminum Length: 78in / 2m Color: Silver Anodized Default Diffuser: Opal Optional Diffuser: Clear Video: LED Aluminum Profile Efficient Light Diffusers by SIRS-E Downloadable Document: SIRS-E Aluminum Extrusion Datasheet
-
SKU# StripLockStripLockTM wire lead connectors are used for going around corners or, when cut in half, to create two power leads or jumper cables to bridge gaps in order to get LED lighting to other areas. StripLockTM splice connectors are used to join two strips, creating a continous run of LED lighting.
-
SKU# StripFlexLED-12CVThe SIRS-E LED Strip Tape Light, equipped with 60 high-intensity white LEDs per meter, offers uniformly bright illumination, ideal for various general-purpose lighting installations. These flexible LED strips present a convenient lighting option, adaptable to any room or surface, and feature adjustable brightness for tailored accent lighting. The StripFlexLED 12 Volt White LED Strip Light Tape, UL Listed and proudly Made in the USA by SIRS-E, is engineered for custom installations demanding high quality. This LED strip offers remarkable illumination with approximately 330 lumens per foot and a high Color Rendering Index (CRI) of about 95, ensuring accurate color representation in various applications. Ready for immediate use, it can also be cut to specific sizes for tailored lighting solutions. The set includes tape connectors for rejoining cut segments, ideal for extending the strip or navigating around obstacles. Suitable for a range of accent lighting needs such as cabinet, tray ceiling, or shelving lighting, it requires a SIRS-E or compatible 12V power supply and can be enhanced with an optional dimmer or switch, available separately. Downloadable Documentation:
- StripFlexLED™ Manual
- StripFlexLED™ Datasheet
- Video - Coming Soon
ShopMark Eviota2024-04-02T12:17:21-05:00