-
SKU# PS12V200W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V200W-MAG -
SKU# PS12V300W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V300W-MAG -
SKU# 70304DMX USB Pro is the Industry standard DMX USB Interface for DMX/RDM. Control your lights from PC or Mac programs The first choice of lighting professionals Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a reliable and robust product that excels at so many fundamental applications. It allows for USB 2.0 support through its USB-B connection to send or receive a physical DMX512 signal from PCs, Macs and Linux devices running through a vast array of third-party software that supports our DMX USB Pro software API. This DMX USB converter features an internal frame buffer for consistently generating DMX frames when outputting, ensuring a reliable flow of data and always giving you a stable data stream, regardless of your PC’s workload. Downloadable Documentation: -
SKU# NC4FP-1TECHNICAL DATA Electrical- Number of contacts: 3 - 7 (except MP: 3-6)
- Rated voltage: 50 V ac
- Contact resistance: < 5 m
- Insulation resistance - initial: > 2 G
- - after damp heat test: > 1 G
- -IEC 68-2-30)
- Dielectric strength: 1500 V dc
- Rated current:
- 3 pole: 16 I [A], 2.5/14 mm2/AWG, ≤ 4 C
- 4 pole: 10 I [A], 1.5/16 mm2/AWG, ≤ 7 C
- 5 and 6 pole: 7.5 I [A], 1.0/18 mm2/AWG, ≤ 7 C
- 7 pole: 5 I [A], 1.0/18 mm2/AWG, ≤ 9 C
- Lifetime: > 1000 mating cycles
- Insertion / withdrawal force: ≤ 20 N
- Retention method (Female versions only): - standard: latch lock
- "-0" version: retention spring
- Separating force: ≤ 20 N
- Shell: ZnAl4Cu1, gal Ni or black Cr plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: - female (3 pole): CuSn6
- female (4-7pole) & male: CuZn39Pb3
- Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
- Latch lock & spring: CK 67 steel, treated
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
-
-
Out of stock
SKU# 70572Quick Links: -
SKU# IA-HW-001001Important Links:The USB ONE allows you to control 512 DMX channels via Madrix software.
- DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
- USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.
- Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.
- Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.
- Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.
- Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).
- Active USB: Must be connected to an active USB 2.0 hub with a power supply.
-
Out of stock
SKU# DMX-TEST-01Free Ground Shipping.The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works
- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-01 -
Out of stock
SKU# DMX-TEST-02Free Ground Shipping.The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
SKU# LED-PIXEL-12Features:- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-12
- Operating Voltage: DC 24V
- Max Current: 3.6W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: SMD RGB 5050
- Total LEDs: 3
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: Self Address
- Viewing Angle: 360°
- Weight: 264g
- 104mm x 104mm x 83mm
- 4.09in. x 4.09in. x 3.26in
-
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)
-
SKU# LED-PIXEL-IN-PWLED Pixel Power Supply Cable, Waterproof, 2 Pin Male to Tips. Use this cable to connect your power supply to the initial cable LED-PIXEL-T-INI-DMX and in between the chain using LED-PIXEL-T-PW. SKU# LED-PIXEL-IN-PW -
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
SKU# LED-PIXEL-HP3W-80mmTech Specs:- 3W RGB LED
- DC 12V
- Waterproof
- Aluminum Housing with clear lense
- 40mm
- DMX512 Compatible
-
SKU# LED-CAB-4RGB LED Strip 20 AWG Waterproof Connector With Lead 4 Pin Male or Female, 1 Meter is 3.25ft, for RGB LED Strips, non waterproof IP40, waterproof IP67, Submersible Ip68. LED-CAB-4M-WP: Male LED-CAB-4F-WP: Female SKU# LED-CAB-4 -
SKU# LED-CAB-WP-2LED Strip 20 AWG Waterproof Connector With Lead 2 Pin Male or Female, 1 Meter is 3.25ft, for NON-RGB LED Strips. LED-CAB-2M-WP: Male LED-CAB-2F-WP: Female SKU# LED-CAB-WP-2 -
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
Features:1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet
-
SKU# DMX-TUBE-CABLEDMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE -
SKU# LED-PIXEL-HP3W-64mmQuick Links: Features:- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-HP3W-64mm
- Operating Voltage: DC 12V
- Max Current: 3W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: High efficiency and power LED 1 watt per color
- Total LEDs: 1
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: SelfAddress
- Viewing Angle: 360° Weight: 250g
- 64mm x 64mm x 64mm
- 2.50in. x 2.50in. x 2.50in.
-
SKU# LED-PIXEL-IN-PW-64mmLED PIXEL 64mm Initial Power Waterproof Cable. SKU# LED-PIXEL-IN-PW-64mm -
SKU# LED-PIXEL-T-INI-DMX-64mmLED Pixel Initial T-Cable, Waterproof for 64mm Pixel. SKU# LED-PIXEL-T-INI-DMX-64mm -
SKU# LED-PIXEL-T-PW-64mmLED Pixel Power T-Cable Waterproof for 64mm Pixel SKU# LED-PIXEL-T-PW-64mm -
SKU# LED-PIXEL-TERM4LED Pixel Power Terminator for 4 Way cable 120 Ohms. SKU# LED-PIXEL-TERM4
ShopMark Eviota2024-04-02T12:17:21-05:00
