-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:
- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# AD-PRO-6-PSTech Specs:
- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# AD-PRO-6-BKTech Specs:
- 1 - DB-15 Male Connector
- 6 - 5 Pin XLR Female Neutrik Connectors
- Length: 19"
- Color: Black (white XLR cable segments)
- Made with High Quality Horizon Cable
- Made with High Quality Neutrik Connectors
- Complies with DMX512 USITT standards
- Made in the USA.
-
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:
- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# dmx-venue-packIntroducing our NEW DMX LED Strip Venue Lighting Kits. Each kit is different, however all of them come with the same basic components allowing you to choose from a simple economical set-up, to a more elaborate DMX pixel by pixel controlled LED Strip installation. With each of these kits (and your imagination), you can turn your business, church, or home into a vibrant new setting while providing endless possibilities and design options. There are up to four different packages to choose from ranging from "Basic" to "Ultimate Plus,” each being customizable to best fit your project's specific needs as well as your budget. Give us a call today and we will help to choose the best Venue Kit suited for your needs. View specific package details: Basic | Pro | Ultimate | Ultimate+
Basic
This DMX pixel-by-pixel LED package is suitable for either 16 rays of 4 foot LED Strips or 8 rays of 8 foot LED Strips. **Please note that these packages do not contain any type of metal structure** Package Contains:- 1 - MADRIX License Key - Entry
- 1 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 4 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 8 - LED Power Supply 30 Watts 5 Volts
- 32 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 20 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 4 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 1 Hour of Technical Supports
Pro
This DMX pixel-by-pixel LED package is suitable for either 32 rays of 4 foot LED Strips, 16 rays of 8 foot LED Strips or 8 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Entry
- 2 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 8 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 16 - LED Power Supply 30 Watts 5 Volts
- 64 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 40 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 8 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 2 Hours of Technical Support
Ultimate
This DMX pixel-by-pixel LED package is suitable for either 64 rays of 4 foot LED Strips, 32 rays of 8 foot LED Strips or 16 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Basic
- 3 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 16 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 32 - LED Power Supply 30 Watts 5 Volts
- 128 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 60 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 16 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 3 Hours of Technical Support
Ultimate Plus
This DMX pixel-by-pixel LED package is suitable for either 128 rays of 4 foot LED Strips, 64 rays of 8 foot LED Strips or 32 rays of 16 foot LED Strips. Package Contains:- 1 - MADRIX License Key - Basic
- 6 - Artnet to DMX Controller 6 Universes AD-PRO-6
- 32 - DMX LED Strip 34 Pixel/m RGB SIRS-E Pixel DMX Controlled
- 64 - LED Power Supply 30 Watts 5 Volts
- 256 - ft. of Wire 14 AWG Hook-Up Wire Red & Black For LED Power Supply
- 80 - ft. of RGBW LED Strip Wire 20 AWG RGB 5 Wire Conductors Cable
- 32 - DMX 5 Pin XLR Neutrik 20 ft. Cable
- 4 Hours of Technical Support
-
SKU# LED-PS12V-60W-ULImportant Features:
- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- Class 2 Power Supply
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-90W-ULImportant Features:
- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-TUB-XX3M™ Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all tubing is split resistant, mechanically tough, easily marked and resists cold flow. Typically used as a shrink-fit electrical insulation over cable splices and terminations. Great for use with 5050 LED Strip leads. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Please Note: This item is sold Per Feet SKU# LED-TUB-XX
-
SKU# XSP-5R2-USDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-MIXDMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC – 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
ShopMark Eviota2024-04-02T12:17:21-05:00