Name: SIRS Electronics, Inc.
Address: 3307 West Street, Rosenberg, Texas, 77471

Baxter Pocket Console Rack Mount 2

SKU# Rackmount-2
The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:

DMX Output: Board mounted terminal block

Optional FlushMount Faceplate 5 pin XLR available

Data Output: DMX-512 1990 standard, 44Hz

Memory: Non-Volatile Flash

Operation:

Number of Channels: 8 with Momentary BUMP buttons

Patch: Fully independent 512 DMX to 1-8 Channels

Quick Links:

Baxter Rack Mount Instruction Manual

SKU# Rackmount-2
Details
Product Inquiry
MADRIX USB Temperature

SKU# IA-HARD-001012

MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012

Details

Product Inquiry
MADRIX USB Contact Closure

SKU# IA-HARD-001011

MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011

Details

Product Inquiry
Baxter Wireless Console

SKU# Baxter Wireless

Details

Product Inquiry
Best Boy 2 Pocket Console DMX with Playback-8 Dimmer Tester

SKU# Best-Boy-2-Pocket-Console
The Baxter BEST BOY-2™ Pocket Console® is the source for the TOUGHEST, smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console ever made for your hands. FEATURES

Levels are set using eight faders (slider pots)

Up to 8 Sub-master scenes can be recorded

Each FADER has an associated bump button

Flushmount power and DMX I/O receptacles are on the side of the 1060 case

The faders are patchable using from 0 to 512 dimmer addresses per fader

The unit is powered by a 9v battery OR by a 120v AC power supply

Built to take it in an armored case with an etched faceplate

TECHNICAL SPECIFICATIONS:

9 Volt Alkaline Battery Life – 3 hours minimum

120v AC adapter

Number of DMX dimmer addresses supported – 512

Number of Faders – 8 with bump buttons

Data output – DMX-512 1990 standard

Data Speed: 44hz

Comes with instructions & 90-day warranty

BCI - Baxter Controls, Inc
Details
Product Inquiry
The Pocket Console Series

SKU# POCKET-CONSOLE
Basic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:

Optional Pelican Cases are available

small, lightweight, portable and designed to be hand held

Levels are set using eight faders (slider pots)

Each FADER has an associated bump button

512 dimmer addresses are patchable to any of the eight faders

The faders are patchable using from 0 to 512 dimmer addresses per fader

The unit is powered by a 9v battery OR by a 120v AC power supply

Technical Specifications:

9 Volt Alkaline Battery Life – 3 hours minimum

120v AC adapter

Number of DMX dimmer addresses supported – 512

Number of Faders – 8 with bump buttons

Data output – DMX-512 1990 standard

Data Speed: 44hz

Comes with instructions & 90 day warranty

Quick Links:

Basic Pocket Console User Manual

Playback 8 Pocket Console User Manual

dmXact Pocket Console User Manual

MultiPatch Pocket Console User Manual

24-Eight Pocket Console User Manual

SKU# POCKET-CONSOLE
Details
Product Inquiry
Swisson XMT-350 RDM & DMX Controller Complete Set

SKU# XMT-350
Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.

RDM controller

Set DMX address remotely

Set "Personality" mode remotely

Readout RDM device information

Automatic DMX patch support over RDM

DMX receiver

DMX transmitter

RGB LED control

Moving light control

Cable tester

Channel "tracer"

Dip-switch display

Programmable sequence (Chaser)

Timing analysis

Configurable frame rate

PC software

Quick Links:

XMT-350 User Manual

Flicker Finder User Manual

SKU# XMT-350
Details
Product Inquiry
Swisson XMT-120A DMX Measurement Tool Complete Set

SKU# XMT-120A
Includes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.

DMX receiver

DMX transmitter

RGB LED control

Moving light control

Cable tester

Channel tracer

Dip-switch display

Programmable sequence

Timing analyzer

Adjustable DMX frame rate

PC software

And more

Quick Links:

XMT 120A User Manual

Flicker Finder User Manual

SKU# XMT-120A
Details
Product Inquiry
SceneStation USB Stick

SKU# SS-USB-STICK

For use with SceneStation Studio software for Mac or Windows computers. The SceneStation USB Stick is used on your Mac or PC computer with the free SceneStation Studio software to remotely manage, control and program one or more wireless SceneStations. The adaptor provides the 2.4GHz communication link between the computer and the SceneStation Network. All wireless SceneStations can be protected by a Security PIN to allow only authorized users to be able to control or edit a station. SS-USB-STICK | USB Stick Wireless USB adaptor for use with SceneStation Studio and your Mac or PC.

Details

Product Inquiry
SceneStation 3 Series

SKU# SCENESTATION-3
SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. SceneStation is entirely self-contained in a single gang, wall-switch sized unit. Perfect for restaurants, high-end residential, trade show booths, and more, SceneStation can control nearly any DMX device (RGB fixtures, moving lights, dimmers, effects, etc.), while also remaining very simple for the end user. SS-305 | Architectural SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes), flushplate Unit, pluggable wiring block and mounting hardware. Meant to be wall-mounted. SS-310 | Portable SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes) in a portable enclosure with 5-Pin XLR jacks and power supply (AC-12). Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. SS-315 | Portable SceneStation 3 Kit Includes SceneStation in a portable enclosure with 5-Pin XLR jacks, power supply (AC-12), SceneStation User's Remote and USB StationLink Adaptor, all enclosed in a protective carrying case. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. Key Features

Completely Self-Contained

64 Scene Capacity

Static, Sequential, Toggle, Chase, Momentary & Pile-On Modes for Each Button

Built-in Effects Engine for creating dynamic scenes

Programmable RGB Backlit Buttons

Includes 2.4GHz Wireless SceneStation Module

DMX-512 Output (44Hz)

DMX Input Snapshot and/or Manual Channel Editing

IR Remote Setup and Operation

Optional "Power-On" Scene Selection

AC or DC Operation

Quick Links:

All SceneStation Compatible Products and Accessories

SceneStation Downloads

SKU# SCENESTATION-3
Details
Product Inquiry
Swisson DMX Wireless Opto-Splitter

SKU# XSW-TR-SERIES
2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.

XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box

XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack

XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box

XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack

XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box

XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack

XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box

XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack

SKU# XSW-TR-SERIES
Details
Product Inquiry
Swisson XSH Hybrid Splitter DMX-RDM/DMX-Power

SKU# XSH-HYBRID-SERIES
The XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.

LED Display; signal, power

Optical isolation prevents signal disturbances

Clean and clear amplification of DMX and RDM signals

Extend DMX lines infinitely with the splitter

Strong Power Supply worldwide 50VAC - 276VAC

Input DMX, 5 Pin XLR or 3 Pin XLR

Box version: M10 & M12 thread for a clamp an eye bolt for safety line

Dimensions; Rack LxWxH: 19"x134mmx1Unit

Power

Powercon input (1pcs)max 20A

Powercon output (4pcs)max 20A

Power measurement 2-20 A in 2 A steps

Quick Links:

XSH User Manual

SKU# XSH-HYBRID-SERIES
Details
Product Inquiry