Name: SIRS Electronics, Inc.
Address: 3307 West Street, Rosenberg, Texas, 77471

The Pocket Console Series

SKU# POCKET-CONSOLE
Basic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:

Optional Pelican Cases are available

small, lightweight, portable and designed to be hand held

Levels are set using eight faders (slider pots)

Each FADER has an associated bump button

512 dimmer addresses are patchable to any of the eight faders

The faders are patchable using from 0 to 512 dimmer addresses per fader

The unit is powered by a 9v battery OR by a 120v AC power supply

Technical Specifications:

9 Volt Alkaline Battery Life – 3 hours minimum

120v AC adapter

Number of DMX dimmer addresses supported – 512

Number of Faders – 8 with bump buttons

Data output – DMX-512 1990 standard

Data Speed: 44hz

Comes with instructions & 90 day warranty

Quick Links:

Basic Pocket Console User Manual

Playback 8 Pocket Console User Manual

dmXact Pocket Console User Manual

MultiPatch Pocket Console User Manual

24-Eight Pocket Console User Manual

SKU# POCKET-CONSOLE
Details
Product Inquiry
Swisson XSH Hybrid Splitter DMX-RDM/DMX-Power

SKU# XSH-HYBRID-SERIES
The XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.

LED Display; signal, power

Optical isolation prevents signal disturbances

Clean and clear amplification of DMX and RDM signals

Extend DMX lines infinitely with the splitter

Strong Power Supply worldwide 50VAC - 276VAC

Input DMX, 5 Pin XLR or 3 Pin XLR

Box version: M10 & M12 thread for a clamp an eye bolt for safety line

Dimensions; Rack LxWxH: 19"x134mmx1Unit

Power

Powercon input (1pcs)max 20A

Powercon output (4pcs)max 20A

Power measurement 2-20 A in 2 A steps

Quick Links:

XSH User Manual

SKU# XSH-HYBRID-SERIES
Details
Product Inquiry
Swisson XRC-CT15b External Contact Box for XRC-200

SKU# XRC-CT15b
15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.

Remote control of the XRC-200

Connection through a RJ45 cable (not included)

Powered by the XRC-200

15 contacts

GND and VCC

LED connection control

Quick Links:

XRC-CT15b User Manual

SKU# XRC-CT15b
Details
Product Inquiry
Swisson XRC-200-W DMX Dynamic Recorder w/ Wall Mount

SKU# XRC-200-W
An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.

Record and play back 64 sequences

10 configurable play lists

Configurable fade times

Optional 15 control inputs

2 DMX inputs

2 DMX outputs

Built-in timer

Backup device

USB connection for firmware update, and PC software

PC software for uploading, downloading and storage of shows

Exact 100% record and replay of complex lighting movements and lighting sequences

All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure

The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons

Can be connected to a timer

Keyboard lock function

Wall mount

2 universe input/2 universe output

Quick Links

XRC-200 User Manual

XRC 200 With Wall Mount Flyer

SKU# XRC-200-W
Details
Product Inquiry
Swisson XRC-200 DMX Dynamic Recorder

SKU# XRC-200
An easy to use recorder and play unit. The XRC-200 has the ability to record 2 DMX universes (1024 DMX channels), and is also suitable for LED and moving light applications/installations. The XRC-200 is an easy to use DMX recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals. The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time. With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically. The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device. The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.

Record and play back 64 sequences

10 configurable play lists

Configurable fade times

Optional 15 control inputs

2 DMX inputs

2 DMX outputs

Built-in timer

Backup device

USB connection for firmware update, and PC software

PC software for uploading, downloading and storage of shows

Exact 100% record and replay of complex lighting movements and lighting sequences

All shapes like circles and loops will be replayed exactly and takeover the DMX signal in the event of control panel failure

The XRC-200 can be controlled with DMX signal or interfaced through 10 of it’s fast access buttons

Can be connected to a timer

Keyboard lock function

Wall mount

2 universe input/2 universe output

Quick Links:

XRC-200 User Manual

XRC-200 Flyer

SKU# XRC-200
Details
Product Inquiry
Swisson XND 4-Port Ethernet DMX Node

SKU# XND-4
The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features

Art-Net to DMX converter for 4 independent universes

Supports Art-Net I, II and 3

4 individually optically isolated DMX outputs

Graphic display and encoder knob for easy configuration and precise status information

Quick access button for each DMX output port for quick selection of ArtNet universe

Neutrik powerCON input and output

Universal power supply

Applications

Control light shows from an Art-Net capable lighting desk

Control lighting fixtures using an Art-Net enabled PC software or a mobile device

Merge the light controlling data sent from two Art-Net controllers

Quick Links:

XND-4 Data Sheet

XND-4 User Manual

SKU# XND-4
Details
Product Inquiry
Swisson XMT-350 RDM & DMX Controller Complete Set

SKU# XMT-350
Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.

RDM controller

Set DMX address remotely

Set "Personality" mode remotely

Readout RDM device information

Automatic DMX patch support over RDM

DMX receiver

DMX transmitter

RGB LED control

Moving light control

Cable tester

Channel "tracer"

Dip-switch display

Programmable sequence (Chaser)

Timing analysis

Configurable frame rate

PC software

Quick Links:

XMT-350 User Manual

Flicker Finder User Manual

SKU# XMT-350
Details
Product Inquiry
Swisson XMT-120A DMX Measurement Tool Complete Set

SKU# XMT-120A
Includes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.

DMX receiver

DMX transmitter

RGB LED control

Moving light control

Cable tester

Channel tracer

Dip-switch display

Programmable sequence

Timing analyzer

Adjustable DMX frame rate

PC software

And more

Quick Links:

XMT 120A User Manual

Flicker Finder User Manual

SKU# XMT-120A
Details
Product Inquiry
Swisson XMG-51 DMX High Speed Merger

SKU# XMG-51
The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.

5 DMX512 inputs

1 DMX512 output

Only 50us latency

Bypass relay

Manual switch

HTP, LTP channel, LTP line Modes

Channel offset for each input

Connect up to 5 lighting desks into one DMX-512 line

Fast uplink port with only 0.00005 second delay

Manual access

Channel offset for each port

Switch mode for backup

HTP merge mode (Highest Takes Precedence)

LTP merge mode (Last Takes Precedence)

HTP or LTP for each channel

Overwrite by priority

Optical isolated

Works on worldwide power supplies, 85V up to 267V

Quick Links:

XMG-51 User Manual

SKU# XMG-51
Details
Product Inquiry
Swisson XAC-ANT-2.4 Antenna 2.4 GHz to XSW

SKU# XAC-ANT-2.4

Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4

Details

Product Inquiry
Swisson Wireless DMX Transmitters & Receivers

SKU# SWISSON-XWL-TR
XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter

XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter

XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver

XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver

XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter

XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter

XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver

XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver

The XWL series encompasses both, W-DMX as well as CRMXcompatible and compact wireless DMX transmitters and receivers. W-DMX from Wireless Solution and CRMX from LumenRadio are the leading technologies for wireless DMX transmission. With a latency of only about 5 ms, CRMX and W-DMX guarantee a DMX connection with the properties and reliability level equivalent to those of a wired link.
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.

All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.

Wireless DMX receiver (XWL-R models)

Wireless DMX transmitter (XWL-T models)

Available with W-DMX™ or CRMX™

M10/M12 threads for truss mount

3/8” thread for mounting on a microphone stand

Built-in power supply (powerCON connected)

Compact, rugged housing

Quick Links:

XWL User Manual

SKU# SWISSON-XWL-TR
Details
Product Inquiry
Swisson RJ45 RDM & DMX Opto-Splitter

SKU# RJ45-OPTO-SPLITTER
The Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.

ETL/cETL/CE certified

Switch for RDM & DMX or DMX only

LED display; signal, power, RDM

Optical isolation prevents signal disturbances

Isolation between input and outputs as well as full isolation between each output

Simplify connections and reduce installation and cable cost

Easy detection of disturbances by intelligent DMX and RDM protocol supervisor

Clean and clear amplification of DMX and RDM signals

DMX line can be terminated by pressing a button

Extend DMX lines infinitely with the splitter

XSR-8B-US: The RJ45 RDM & DMX Opto-Splitter Box is ETL/cETL/CE certified, equipped with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-US: The RJ45 RDM& DMX Single Rack is an ETL/cETL/CE certified, easily mountable rack with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-8R-US: The RJ45 RDM& DMX Double Rack is an ETL/cETL/CE certified, easily mountable rack with two RJ45 input, two RJ45 through, ten RJ45 outputs and a NEMA 5-15 molded plug. Quick Links:

XSP & XSR Splitter Series User Manual

SKU# RJ45-OPTO-SPLITTER
Details
Product Inquiry