-
Out of stockSKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2
- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# LED-PS12V-80W-ULImportant Features:
- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET SKU# RJ45-MK2-5
-
SKU# DMX-CON4-C2This new edition of the DMX-CON4 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2
- DMX 512 LED Decoder
- 4 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DURACAT5E4 Pair DURACAT 24AWG CAT5E Cable is ideal for making your own heavy duty RJ45 cable. This high quality cable is tested to work best when paired with RJ45-PLUG-KIT male connectors for custom length Ethernet cables. This rugged 4 pair cable is shielded by thick coating. It is built for a high speed clean signal that can travel long distances. This cable is ideal of DMX lighting setups where signal purity is of great importance. Meets Cat5E Specifications. SKU# DURACAT5E