Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  • SKU# DIN-HMB
    Kit for mounting CS-810, CS-816 horizontally on DIN Rail. SKU# DIN-HMB
  • SKU# IA-HARD-001013
    MADRIX® USB light sensor This sensor measures the ambient light level. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX® as well as percent. Example of use: Master Fader SKU# IA-HARD-001013
  • Out of stock
    SKU# DMX-ADD-MOD
    The DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s):   Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
  • SKU# IA-0050XX
    Madrix 5 Upgrades allow for you to upgrade from any previous license purchase to a higher version at anytime in order to increase the available output. If you are running a Madrix license version pre-version 5 release, you will need to purchase a Madrix Update and a Madrix Metallic Key before moving forward. Quick Links: SKU# IA-0050XX
  • SKU# Radar
    Management. Manage all of your devices the remote way. Manage them the smart way. Everywhere, lighting designs beautifully light up the world all around us. And clients expect them to do so without failure, each and every day. Behind the scenes, the lighting industry faces the complex aspects of modern technologies. Increasingly large projects become increasingly difficult to manage and maintain. That is why today‘s DMX lighting fixtures are equipped with Remote Device Management. It is a two-way communication for receiving instructions as well as sending out feedback. When devices report back data, you gain access to a whole new level of available information, insights, and control. MADRIX RADAR is the complete toolbox to make the most of this data; automatically and efficiently. Supervise all of your lighting fixtures in a single software. Handle large amounts of RDM devices. It is a new kind of application that opens up entirely new possibilities for you and your clients. MADRIX RADAR includes automatic fixture patching, fully automatic 24/7 device monitoring, automatic e-mail notifications, and much more. Transform how you work with luminaires. Easily configure settings remotely. Let the software monitor devices automatically for you. Quickly see the results in graphical overviews at a single glance. That means that your setup and maintenance processes are much faster, much easier, and much more cost-efficient than ever before. Build a database of past sensor data and see the progression of device parameters, such as temperature and operating hours. Exchange devices that are likely to fail soon, before they do. Make your maintenance costs much more predictable by planning them more effectively in advance. Downloadable Documentation: Download and test MADRIX RADAR for free
  • SKU# AURA
    MADRIX AURA The advanced lighting-control recorder and stand-alone playback unit. Dynamic lighting at the touch of a button. MADRIX AURA is small in size, but mighty in features. It is the MADRIX stand-alone unit. Configurations with 2, 8, 12, or 32 universes bring captivating installations to life. As the central hub, you can count on independent lighting control. The built-in website makes it easy to get started. First, record any Art-Net or Streaming ACN network stream live. MADRIX AURA then plays back sophisticated light shows, effects, and visuals from SD card. Run a scheduled playlist, or trigger scenes externally with choices like MADRIX ORION. Simply press record. Simply press play. Downloadable Documentation: Datasheet User Manual Technical Manual AURA 2 Specification AURA 8 Specification AURA 32 Specification STEP/CAD File AURA AURA Preset Scenes RGB MADRIX Hardware Manager Firmware Release Notes
  • SKU# IA-HW-001001
    Important Links:

    The USB ONE allows you to control 512 DMX channels via Madrix software.

    • DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
    • USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.
    • Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.
    • Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.
    • Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.
    • Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).
    • Active USB: Must be connected to an active USB 2.0 hub with a power supply.
    SKU# IA-HW-001001
  • Out of stock
    SKU# 70314
    The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO
    • Dual, fully independent, DMX ports each with full RDM capability
    • MIDI input and output ports
    • Standalone operation for unattended replay of lighting shows (limit 1 universe)
    • One firmware version supports all features
    • Aesthetically slim-profile, machined aluminium box
    • True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
    • Internal frame buffering (preserve data integrity when computer is busy)
    • Works at various communication speeds
    • Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
    • Stores configuration and user data in EEPROM
    • Refresh rate configurable from 1 to 40Hz
    • Break time configurable from 96uS to 1.3mS
    • MaB time configurable from 10.6uS to 1.3mS
    • Upgradeable firmware
    • Security / software protection API
    • Comes with USB and break out cables
      Enttec Pro2 (Pro Mk2) DMX USB PRO Package Comes with: Accessories: MIDI breakout cable sold separately Quick Links: SKU# 70314
  • SKU# Orion
    Have you ever thought about luring people into the store/club/ride by letting them interact with the lighting? As a general-purpose input device, MADRIX ORION fits right in. Transform your next project by introducing interactive elements. How about a convenient button? How about a motion sensor? Connect switches, potentiometers, and triggers. Include sensors for light, temperature, passive infrared, and more. Integrate building automation and home automation. 8 versatile inputs receive analog signals from 0 V – 12 V. Converted into 8-bit or 16-bit digital DMX, MADRIX ORION outputs Art-Net or Streaming ACN over Ethernet network. The MADRIX ORION is specifically designed as a general-purpose input device for analog input and Ethernet-based output for remote control and interactivity. Made in Germany 5 year Warranty Eco Sustainability Downloadable Documentation: Madrix Orion Datasheet Madrix Orion User Manual Madrix Orion Technical Manual Drivers, Firmware, and More
Go to Top