-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:
- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# DMX-TUBE-PROGTech Specs:
- Color: Black
- Address Input: Manual
- Display: Digital Display
- Data Output: XLR 3-Pin Female
- Control: DMX512 Protocol
- Power Requirement: 12V DC
- Part Number: DMX-TUBE-PROG
-
SKU# 5050-CON-C5W
- 5050 RGBW LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires
- 12mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip
-
SKU# DMX-5RGB-34XXSIRS-E® Direct DMX RGB LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, and blue diodes can be mixed to potentially produce over a million color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGB Full Info Pack
- DMX LED Strip Brochure
- DMX RGB Datasheet
- DMX RGB IES File (zip)
- DMX RGB Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# AD-PRO-6Tech Specs:
- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
SKU# DMX-CON4V2The DMX-CON4V2 DMX decoder was made with our A-Grade RGBW LED Strips in mind. This particular decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 10 amps per channel at 12V DC with a total power of 480W and at 24V DC with a total power of 960W. This LED Decoder provides you with the freedom to control 4 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:
- DMX 512 LED Controller
- 4 output channels, max 10A per channel
- 960W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON4V2
- Meets DMX512/1990
- 256-levels of brightness, full-color with driver controls
- Can handle the high amp draw of RGBW Strips
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-4 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
SKU# DMX-CON6The DMX-CON6 DMX decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering, as well as 6 amps max per channel @ 12V DC with a total power of 432W and @ 24V DC with a total power of 864W. This LED Decoder provides you with the freedom to control 6 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs:
- DMX 512 LED Decoder
- 6 output channels, max 6A per channel.
- 864W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON6
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED lights with 1-6 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules