-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10 -
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
SKU# AD-PRO-6-BKTech Specs:- 1 - DB-15 Male Connector
- 6 - 5 Pin XLR Female Neutrik Connectors
- Length: 19"
- Color: Black (white XLR cable segments)
- Made with High Quality Horizon Cable
- Made with High Quality Neutrik Connectors
- Complies with DMX512 USITT standards
- Made in the USA.
-
SKU# AD-PRO-6-PSTech Specs:- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
-
SKU# anyDMX-V2Features:- Reliable wireless DMX 512 signal.
- Digital screen
- Up to 2,000 meters range. (Line of sight)
- A total of 16 frequencies to chose from.
- One unit can both transmit and receive.
- Unlimited amount of units can work together.
- Sturdy aluminum construction.
- One year warranty. (From date of purchase)
- Model: anyDMX-V2
- Operating Voltage: DC 5V
- Max Current: 500mA
- Ambient Temperature: -20°C~50°C
- Range: 2,000 m (In line of sight)
- IP Rating: IP40 (Non water proof, keep dry at all times)
- Working Frequency: 2.4GHz to 2.525GHz
- Dimensions : 209mm x 20mm x 20mm
- (8.22in. x .78in. x .78in.)
- Connect power supply to unit.
- Select same color frequency and mode LED light using the frequency changing key on both units. (This is your operating frequency)
- Connect transmitting unit to DMX console or software. (Gender changer is needed at this point)
- The frequency and mode LED will begin to flash red on the unit connected as transmitter.
- At this time, the frequency and mode LED on the receiving unit will flash blue. (This means it's receiving)
- Connect receiving unit to DMX fixture.
- A successful connection has now been achieved.
-
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# ProDMX-CABThe SIRS-E® ProDMX-CAB DMX512 Cable is a 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications
-
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET -
SKU# RJ45-6F-MK2Heavy Duty CAT5, RJ45 to RJ45, 6ft long Cable by SIRS-E Length: 6ft Connector: RJ45 Made in USA Quick Links: SKU# RJ45-6F-MK2 -
SKU# DMXN20-3LHigh Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We design LED strips in Houston, Texas, USA, and manufacture them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
