-
SKU# ACUHUE-XXCV27SIRS-E® high quality RGBW LED strip AcuHue™ CV (2700K) utilizes four LED diodes (red, green, blue, white – 2700K) which are mixed via a control method of your choice to potentially produce over a billion color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation: This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam.
-
SKU# RF-MZTX-1CHTech Specs:
- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works with Single Color Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-1CH Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-1CHTech Specs:
- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- With the ability to control up to 4 zones, you can control multiple setups with one remote.
- Wireless RF control, up to 30m in-line of sight range.
- Power OFF Data Memory allows you to keep your saved settings, even after shutting off the controller.
- User-Friendly set up and control.
- Compatible with LED amplifiers.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers per zone.
-
SKU# DMX-5RGBWN-32XXSIRS-E® Direct DMX RGBW LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, blue and white (5500K) diodes can be mixed to potentially produce over a billion color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. 5-pin XLR connector included with every reel. NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia Video(s):
- Feature Video - UL Listed SIRS-E DMX LED Strip Transform Your Space
- Feature Video - Direct DMX Digital LED Strip control each pixel individually
- Application Video 1
- Application Video 2
- Application Video 3
- DMX RGBW Full Info Pack
- DMX LED Strip Brochure
- DMX RGBW Datasheet
- DMX RGBW IES File (zip)
- DMX RGBW Photometric Test Report LM-79-2008
- Power Custom Diagram
- LED Strip Flexibility Diagram
- Madrix DMX Control Software
- UL Certificate of Compliance
-
SKU# anyDMX-V2Features:
- Reliable wireless DMX 512 signal.
- Digital screen
- Up to 2,000 meters range. (Line of sight)
- A total of 16 frequencies to chose from.
- One unit can both transmit and receive.
- Unlimited amount of units can work together.
- Sturdy aluminum construction.
- One year warranty. (From date of purchase)
- Model: anyDMX-V2
- Operating Voltage: DC 5V
- Max Current: 500mA
- Ambient Temperature: -20°C~50°C
- Range: 2,000 m (In line of sight)
- IP Rating: IP40 (Non water proof, keep dry at all times)
- Working Frequency: 2.4GHz to 2.525GHz
- Dimensions : 209mm x 20mm x 20mm
- (8.22in. x .78in. x .78in.)
- Connect power supply to unit.
- Select same color frequency and mode LED light using the frequency changing key on both units. (This is your operating frequency)
- Connect transmitting unit to DMX console or software. (Gender changer is needed at this point)
- The frequency and mode LED will begin to flash red on the unit connected as transmitter.
- At this time, the frequency and mode LED on the receiving unit will flash blue. (This means it's receiving)
- Connect receiving unit to DMX fixture.
- A successful connection has now been achieved.
-
SKU# RF-MZTX-RGBXTech Specs:
- Operating Voltage: DC 3V (2 x AAA batteries - Not Included)
- Ambient Temperature: -20 C - 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High Quality ABS plastic
- 1 year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZRX-RGBWTech Specs:
- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1 year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
-
SKU# RF-MZRX-RGBTech Specs:
- Input Voltage: 12V - 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C - 60˚C (-4˚F - 140˚F)
- 1-year warranty
- A total of 8 programmed sequences to choose from, 5 color rotating sequences and 3 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Ability to control up to 4 zones per transmitter remote, and multiple receiver RF controllers
- RGB Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
-
SKU# DMX-TUBE-PIXELBYPIXELBuild to order The SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 32
- DMX Channels: 96
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 144
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 192
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night club
- Television studio
- Theater
- Special effects
- and more
- DMX-TUBE-1616 DataSheet
- DMX-TUBE-3232 DataSheet
- DMX-TUBE-4848-DataSheet
- DMX-TUBE-6464-DataSheet
- DMX Address Writer Datasheet