-
SKU# AD-PRO-6Tech Specs:
- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
Out of stockSKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):
- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011
-
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012
-
SKU# SWISSON-DIN-RAIL
- ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- DMX splitter / booster
- DMX repeater
- LED display; signal, power, RDM
- Input optically isolated
- Each output individually optically isolated
- RDM support (optional)
- Extend DMX lines infinitely with the splitter
- Rugged metal housing
- Built-in termination
- RJ-45 and pluggable screw terminal variants
- DC power input, 10-48V DC, max. 400mA
- Isolation between input and outputs as well as full isolation between each output
- Dimensions: L=125mm, W=90mm, H=56mm
- 2 Year Warranty
-
SKU# XSW-TR-SERIES2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.
- XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box
- XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack
- XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack
- XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box
- XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack
-
SKU# SWISSON-XWL-TR
- XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
- XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
- XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
- XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
- XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
- XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
- XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.
All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.
- Wireless DMX receiver (XWL-R models)
- Wireless DMX transmitter (XWL-T models)
- Available with W-DMX™ or CRMX™
- M10/M12 threads for truss mount
- 3/8” thread for mounting on a microphone stand
- Built-in power supply (powerCON connected)
- Compact, rugged housing
-
SKU# ART500The Art 500 is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the most effective control solution for architectural control. Included is the ART 500 software package, which others an easy-to-navigate interface combined with powerful control features. Not only can it be controlled remotely from an iPhone or iPad, but the ART500 is capable of learning sunset and sunrise times with integrated GPS coordination. This feature is excellent for installations that automatically need to light on at a certain time without relying on a photocell switch or other similar devices. Also available on the beautiful slim touch panel is an LCD screen which allows you to read all the different zones depending on how the user may have labeled them. Also, add pictures of the different zones in your installation displayed on the LCD, making it even easier to recognize which zone you select. Available in black and white colors, the ART500 is ready to bring any room into life with unparalleled lighting control. WHAT'S IN THE PACKAGE?
- ART500 Controller
- USB Cable
- Micro SD Card
- Power Adapter
-
SKU# 5050-CON-C5W
- 5050 RGBW LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires
- 12mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip
ShopMark Eviota2024-04-02T12:17:21-05:00