-
SKU# 7009312-Universe, DIN-rail-mountable solution for the recording, triggering, and activation of not only light shows, but video, non-lighting events, and much more. ENTTEC’s S-PLAY MINI is a robust and compact show recorder and playback controller that streamlines your light show by seamlessly integrating external hardware, enabling you to achieve professional lighting control with ease. S-PLAY MINI generates a maximum of 16 light Static/Dynamic/Effect Cues by recording two Universes of Art-Net/sACN sources or one complete Universe via DMX port live recording. Alternatively, you have the option to use the onboard pixel effects generator – an easy-to-use tool for creating gradient Effect Cues in just a matter of minutes. The S-PLAY MINI gives you the ability to fully integrate external devices into your installation – and not just light fixtures. Receive triggers from buttons, switches, or sensors to automate 3rd party devices or machinery using contact closures, Art-Net, sACN, DMX, UDP, or OSC. Using the S-PLAY MINI’s handy web browser interface, simply drag and drop within the timeline to design up to eight playlists using created Cues, Events, and Triggers as building blocks. Control the priority, fade times, number of play counts, and master intensities to tweak your playlists. Play back your program on power up with preset loop times, or choose to trigger the playlists with a custom interface or external triggers in a different fashion to play back up to eight playlists simultaneously overlapping and blending with each other, with different groups and priorities. Downloadable Documentation: -
SKU# IA-HW-001018The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality. Features: Direct Connection Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. Quality Output Of 8 Universes Each device drives up to 1.360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports. SPI Converter Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Use USB or Art-Net for all the great features of the MADRIX software. MADRIX Sync Mode Simply use several units at the same time for larger projects. Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. Invaluable Features The device is ready within seconds after startup. Its firmware is upgradable for future features. HTP Merging is automatically available for two Art-Net sources. Use the built-in web tool for configuration. Connectivity- 2x OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX NEBULA
- Set of screw terminals (2x 4-pin and 1x 2-pin)
- USB cable
- MADRIX software (license not included)
- 2 wall-mount brackets
Additional LED types will be supported with future firmware updates. Quick Links: SKU# IA-HW-001018- APA101
- APA102
- APA104
- APA106
- LPD6803
- LPD8806
- SM16703
- SM16716
- TLS3001
- TLS3008
- TM1804
- TM1809
- TM1812
- TM1829
- UCS1903
- WS2801
- WS2803
- WS2811
- WS2812
- WS2812B
-
SKU# IA-HW-001019The MADRIX STELLA is a dedicated control interface for Art-Net and DMX512 that is designed for high quality and practicability in permanent LED installations. Features: Art-Net Node Art-Net data is directly converted to DMX512. Optimize for short distances to your LEDs and decentralize cabling to cover any distance to the device using Ethernet network. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. 2 DMX-IN/OUT Directly connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX universes per unit as input and/or output, eliminating the need for XLR connectors as a result. Simply use several units at the same time for larger projects. Easy Configuration MADRIX STELLA offers powerful features, especially in combination with MADRIX. Take full advantage of pixel mapping and voxel mapping. Managing the device is still quick and easy. MADRIX Sync Mode Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all output ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. 3rd-Party Controllers MADRIX STELLA complies with the official Art-Net specifications and can be used as a regular Art-Net unit with your other consoles, controllers, or software solutions. MADRIX DMX512 USB Interface Alternatively, you can choose to connect the unit as a plug-and-play solution to your computer and the MADRIX software using any USB 2.0 port. Invaluable Features The device is ready within seconds after startup. HTP Merging is automatically available for two Art-Net sources. You can change specific device settings using the built-in web configuration tool. Connectivity- 2x DMX-IN/OUT (screw terminals)
- 1x RJ45 Ethernet port
- 1x USB port
- 1x Power (screw terminal)
- MADRIX STELLA
- Set of screw terminals (2x 3-pin and 1x 2-pin)
- USB power supply, USB cable, world adapters kit
- MADRIX software (license not included)
- 2 wall-mount brackets
-
SKU# 715218-Universe DIN rail LED pixel controller The OCTO is the NextGen DIN-rail LED pixel controller -> a pixel data converter & controller capable of controlling up to 1360 RGB LED pixels. Downloadable Documentation: Knowledge Base & FAQ's Supported LED Protocols Hi-Res Images Technical Drawings / Dimensions Release Notes Documents 0.3 & firmware v4.0 are for OCTO MK2 with serial numbers 2374307 onwards only Datasheet 0.3 User Manual 0.3 Firmware v4.0 Custom Protocol Creation Guide 0.3 Documents 0.2 & firmware v3.1 are for OCTO MK2 with serial numbers 2341008 - 2350677 only (**Factory reset before updating to V3.1 for a smooth update) Datasheet 0.2 User Manual 0.2 Firmware v3.1 Documents 0.1 & firmware v2.1 are for OCTO MK2 with serial numbers 2318635 - 2323030 only Datasheet 0.1 User Manual 0.1 Firmware v2.1 -
SKU# 70067A smart, cost-effective lighting control solution, the Pixelator Mini is a compact 16 Universe rack, surface & DIN-rail mountable, eDMX to LED pixel protocol converter. Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to 8,192 channels (2,730 RGB pixels) across its 8 PLink outputs (2 Universes per port) with perfect synchronisation across each. The Pixelator Mini acts as the head end of ENTTEC’s PLink control system. The PLink data it generates can be sent up to 300m using standard CAT6 cabling to plug into ENTTEC’s compact power injection modules and LED dimmers. Flexibility is at the heart of the design. Power the Pixelator Mini using either the DC power supply included in the box or by using PoE. Install it using one of the four mounting options included in the box, then configure and update it from anywhere on your network using its intuitive web interface. Downloadable Documentation: Pixelator Mini Datasheet User Manual Firmware (Note: This firmware is not backward compatible with the 70066 Pixelator Mini) -
SKU# 7354XThe smart way to connect your Pixel lights The PLink Injector has been engineered to work alongside your Pixelator to extend your LED pixel layout over long distances. The PLink Injector has been engineered to work as part of an ENTTEC Pixelator Series set up to make it fast, easy and affordable for you to control LED pixel strips or pixel dots over long distances. The injector features an external DC power supply as well as high-power screw terminal connectors. In addition, they are ideal for custom shape pixel LED installations and their scalable design is perfect for large projects. You can choose from the 5V or 12-24V options depending upon your layout. Then simply re-inject power from an external source, and you’re away! Depending on your applications, our Plink Injector comes also in a rugged IP66-rated version, ideal for extreme weather conditions and outdoor installations. Downloadable Documentation: PLink Datasheet PLink Application Diagram -
SKU# IT-SP8DDMX Splitters are used to create multiple independent branches of a DMX signal and/or extend the usable distance of each branch. Our DIN Rail mounted DMX Splitter, the IT-SP8D, is designed for use in permanent installations. Each of the 8 output ports on this model can generate an independently protected DMX signal capable of traveling up to 1,800 feet (550 meters). The IT-SP8D includes a DMX Pass-Thru port for cascading DMX through multiple splitters and provides a built-in DMX Termination switch. 8 Port DIN Rail DMX Splitter Does not include power supply Key Features- Compact DIN Rail housing
- Pluggable terminal blocks for each connection
- Rugged anodized aluminum cover plate
-
SKU# SWISSON-DIN-RAIL- ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
- DMX splitter / booster
- DMX repeater
- LED display; signal, power, RDM
- Input optically isolated
- Each output individually optically isolated
- RDM support (optional)
- Extend DMX lines infinitely with the splitter
- Rugged metal housing
- Built-in termination
- RJ-45 and pluggable screw terminal variants
- DC power input, 10-48V DC, max. 400mA
- Isolation between input and outputs as well as full isolation between each output
- Dimensions: L=125mm, W=90mm, H=56mm
- 2 Year Warranty
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
SUBSCRIBE TO OUR NEWSLETTER
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
