- AcuHue™ CV 5500 Full Info Pack
- AcuHue™ CV 5500 Datasheet
- AcuHue™ CV 5500 IES File (zip)
- AcuHue™ CV 5500 Photometric Test Report LM-79-2008
- Waterproof End-Caps Optional Accessory
-
SKU# ACUHUE-XXCV55SIRS-E® high quality RGBW LED strip AcuHue™ CV (5500K) utilizes four LED diodes (red, green, blue, white – 5500K) which are mixed via a control method of your choice to potentially produce over a billion color rendering options. This flexible LED strip is available in 12V and 24V models, cuttable, and mountable utilizing 3M VHB adhesive. Downloadable Documentation:
-
Out of stockSKU# DMX-MODDMX Filter Module is used to stabilize signal for DMX LED Strips. We recommend that you use this unit at each interval when cutting DMX strips to custom lengths, every 0.5m, for a clean precise signal. This product is included with the purchase of Direct DMX RGB & RGBW (Only 1 Included) tape lighting. Use this DMX Filter Module as a replacement or as stand alone filter for custom length DMX strips. This 5V DMX Filter Module is IP68 water resistant. Video(s): Compatible Strip(s):
- Direct DMX RGB LED Strip: Product Page | Datasheet
- Direct DMX RGBW LED Strip: Product Page | Datasheet
-
SKU# ACUHUE-24CC55SIRS-E® high quality RGBW LED strip AcuHue™ CC (5500K) series utilizes four LED diodes (red, green, blue, white – 5500K) and is operated via current control by integrated circuits placed directly on the flexible PCB. This strip can potentially produce over a billion color rendering options with almost no brightness loss over a 32 ft. run and is cuttable and mountable utilizing 3M VHB adhesive. Video(s): Constant Current Tape Light Downloadable Documentation:
- AcuHue™ CC 5500 Full Info Pack
- AcuHue™ CC 5500 Datasheet
- AcuHue™ CC 5500 IES File (zip)
- AcuHue™ CC 5500 Photometric Test Report LM-79-2008
- This information complies with the following standards and reports: IES LM-79-2008, ANSI C82.77-2002, CIE 13.3-1995, CIE 15-2004, ANSI C78.377-2015, IES TM-30-2015, ANSI/IES LM-80-2015, Specification of Small Chromaticity Differences by David L. MacAdam.
-
Out of stockSKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module
-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:
- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET SKU# RJ45-MK2-5
-
SKU# Pilotino-WifiIntroduction The PILOTINO® WiFi PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This device is a plug and play unit that instantly equips the PILOTINO® PCB with a WiFi Network Connection. The PILOTINO® WiFi PCB is compatible with any kind of Art-Net app, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. This device is compatible with any sort of Network Based DMX control system, including Art-Net. Video: Pilotino® Feature Video Key Features:
- WiFi mode: Station/SoftAP
- Compatible with any ArtNet App
- Robust Wireless 2.4GHz Signal
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy