- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations. -
SKU# POCKET-CONSOLEBasic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:- Optional Pelican Cases are available
- small, lightweight, portable and designed to be hand held
- Levels are set using eight faders (slider pots)
- Each FADER has an associated bump button
- 512 dimmer addresses are patchable to any of the eight faders
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90 day warranty
- Basic Pocket Console User Manual
- Playback 8 Pocket Console User Manual
- dmXact Pocket Console User Manual
- MultiPatch Pocket Console User Manual
- 24-Eight Pocket Console User Manual
-
SKU# Best-Boy-2-Pocket-ConsoleThe Baxter BEST BOY-2™ Pocket Console® is the source for the TOUGHEST, smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console ever made for your hands. FEATURES- Levels are set using eight faders (slider pots)
- Up to 8 Sub-master scenes can be recorded
- Each FADER has an associated bump button
- Flushmount power and DMX I/O receptacles are on the side of the 1060 case
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- Built to take it in an armored case with an etched faceplate
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90-day warranty
- BCI - Baxter Controls, Inc
-
-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011 -
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012 -
SKU# Rackmount-2The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:- DMX Output: Board mounted terminal block
- Optional FlushMount Faceplate 5 pin XLR available
- Data Output: DMX-512 1990 standard, 44Hz
- Memory: Non-Volatile Flash
- Number of Channels: 8 with Momentary BUMP buttons
- Patch: Fully independent 512 DMX to 1-8 Channels
-
SKU# Baxter-9VPSReplacement adapter for Pocket Console™. Tech Specs- Output voltage: 9 VDC
- Output current: 200 mA
- Output power: 1.8 watts
- Output connector: 1.3mm x 3.5mm right angle female barrel plug
- Polarity: Center positive
- Size: 2.4"H x 1.7"W x 1.5"D
- Case color: Black
- Output cord length: 6 feet
- Weight: 0.4 lbs
- Agency approval: UL/CSA
-
SKU# NEUTRIK-XX-33 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.SKU# NEUTRIK-XX-3- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well proteced against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# DMXN20-3LHigh Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L
