Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  • Swisson XND 4-Port Ethernet DMX Node

    Swisson XND 4-Port Ethernet DMX Node

    SKU# XND-4
    The XND-4 is an Art-Net to DMX converter that supports four universes of DMX via its four individually optically isolated DMX outputs. The XND-4 is all you need in order to take advantage of your console’s networking capability since most major lighting consoles are capable of transmitting Art-Net data. The best part is that you will be able to transmit a vast number of universes over one single network cable. Features
    • Art-Net to DMX converter for 4 independent universes
    • Supports Art-Net I, II and 3
    • 4 individually optically isolated DMX outputs
    • Graphic display and encoder knob for easy configuration and precise status information
    • Quick access button for each DMX output port for quick selection of ArtNet universe
    • Neutrik powerCON input and output
    • Universal power supply
    Applications
    • Control light shows from an Art-Net capable lighting desk
    • Control lighting fixtures using an Art-Net enabled PC software or a mobile device
    • Merge the light controlling data sent from two Art-Net controllers
    Quick Links: SKU# XND-4
    Details
  • Swisson Equipment Success

    Swisson RDM & DMX A/B Splitter Mix

    SKU# XPD-DMX-AB-SPLITTER-MIX
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R8-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 3-pin XLR XPD-28-5R2-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 6 x 5-pin XLR and 2 x 3-pin XLR XPD-28-5R4-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 4 x 5-pin XLR and 4 x 3-pin XLR XPD-28-5R6-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 2 x 5-pin XLR and 6 x 3-pin XLR Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19″ Rack mountable
    Quick Links: SKU# XPD-DMX-AB-SPLITTER-MIX
    Details
  • Swisson RDM & DMX A/B Splitter

    Swisson RDM & DMX A/B Splitter

    SKU# XPD-DMX-AB-SPLITTER
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R-US 2:8, rack mountable DMX and RDM splitter, 5- pin XLR XPD-28-3R-US 2:8, rack mountable DMX and RDM splitter, 3- pin XLR XPD-28-8R-US 2:8, rack mountable DMX and RDM splitter, RJ45 Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19" Rack mountable
      Quick Links: SKU# XPD-DMX-AB-SPLITTER
    Details
  • Swisson Equipment Success

    Swisson RDM & DMX Opto-Splitter Switch and Mix

    SKU# XSR-OPTO-SPLITTER-MIX
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-OPTO-SPLITTER-MIX
    Details

  • Swisson RDM & DMX Opto-Splitter Switch and Mix- Single

    SKU# XSR-5R2-US
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. Swisson XSR-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – 3-5 Pin and 2-3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSR-5R2-US
    Details
  • Swisson DMX Opto-Splitter Switch

    Swisson DMX Opto-Splitter Switch and Mix- Double Rack Mix

    SKU# XSP-OPTO-SPLITTER-MIX
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSP-OPTO-SPLITTER-MIX
    Details

  • Swisson DMX Opto-Splitter Switch and Mix- Single Rack

    SKU# XSP-5R2-US
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSP-5R2-US
    Details

  • Swisson Wireless DMX Transmitters & Receivers

    SKU# SWISSON-XWL-TR
    • XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter
    • XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter
    • XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver
    • XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver
    • XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter
    • XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter
    • XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver
    • XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver
    The XWL series encompasses both, W-DMX as well as CRMXcompatible and compact wireless DMX transmitters and receivers. W-DMX from Wireless Solution and CRMX from LumenRadio are the leading technologies for wireless DMX transmission. With a latency of only about 5 ms, CRMX and W-DMX guarantee a DMX connection with the properties and reliability level equivalent to those of a wired link.

    Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.

    All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.

    • Wireless DMX receiver (XWL-R models)
    • Wireless DMX transmitter (XWL-T models)
    • Available with W-DMX™ or CRMX™
    • M10/M12 threads for truss mount
    • 3/8” thread for mounting on a microphone stand
    • Built-in power supply (powerCON connected)
    • Compact, rugged housing
    Quick Links: SKU# SWISSON-XWL-TR
    Details

  • Swisson DMX Wireless Opto-Splitter

    SKU# XSW-TR-SERIES
    2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.
    • XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box
    • XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack
    • XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box
    • XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack
    • XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box
    • XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack
    • XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box
    • XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack
    SKU# XSW-TR-SERIES
    Details

  • Swisson DIN Rail Splitter Programs

    SKU# SWISSON-DIN-RAIL
    • ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
    • ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)
    Tech Specs:
    • DMX splitter / booster
    • DMX repeater
    • LED display; signal, power, RDM
    • Input optically isolated
    • Each output individually optically isolated
    • RDM support (optional)
    • Extend DMX lines infinitely with the splitter
    • Rugged metal housing
    • Built-in termination
    • RJ-45 and pluggable screw terminal variants
    • DC power input, 10-48V DC, max. 400mA
    • Isolation between input and outputs as well as full isolation between each output
    • Dimensions: L=125mm, W=90mm, H=56mm
    • 2 Year Warranty
    The ISP-4 splitters also act as repeaters, and thus they may be used for transporting a DMX signal across larger distances. The DMX splitters of the ISP-4 line of products boost an incoming DMX signal and provide it on four output ports. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. DMX signals often get disturbed by the environment or even by the devices connected to the signal line. An ISP-4 splitter may completely clear the disturbances if it is connected at a location where the signal is still “readable”. Providing four individually optically isolated outputs, as well as an optically isolated input, the ISP-4 splitters may prevent harmful voltages applied to a given port from affecting the other ports and damaging the connected equipment. The bidirectional ISP-4R variants work within DMX / RDM environments, as well as in pure DMX environments. Therefore, ISP-4R splitters are a good solution not only for current RDM users, but also for those who expect to use RDM in the future. The ISP-4D variants on the other hand only work with DMX, while they ignore any RDM data. ISP-4 splitters are DIN rail mountable and powered by an external power supply unit. Quick Links: SKU# SWISSON-DIN-RAIL
    Details

  • Swisson XAC-ANT-2.4 Antenna 2.4 GHz to XSW

    SKU# XAC-ANT-2.4
    Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4
    Details

  • Swisson RJ45 RDM & DMX Opto-Splitter

    SKU# RJ45-OPTO-SPLITTER
    The Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.
    • ETL/cETL/CE certified
    • Switch for RDM & DMX or DMX only
    • LED display; signal, power, RDM
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX and RDM protocol supervisor
    • Clean and clear amplification of DMX and RDM signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    XSR-8B-US: The RJ45 RDM & DMX Opto-Splitter Box is ETL/cETL/CE certified, equipped with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-US: The RJ45 RDM& DMX Single Rack is an ETL/cETL/CE certified, easily mountable rack with one RJ45 input, one RJ45 through, five RJ45 outputs and a NEMA 5-15 molded plug. XSR-8R-8R-US: The RJ45 RDM& DMX Double Rack is an ETL/cETL/CE certified, easily mountable rack with two RJ45 input, two RJ45 through, ten RJ45 outputs and a NEMA 5-15 molded plug. Quick Links: SKU# RJ45-OPTO-SPLITTER
    Details
Visit Our YouTube Channel
Accredited Business Logo
C RU US
C UL US
illuminating logo

IMPORTANT LINKS

About Us
Manufacturing & OEM Services
Security
Shipping & Return Policy
Terms of Use
Privacy Policy
Ordering
Careers
Contact Us

CONTACT INFORMATION

SIRS Electronics, Inc.
3307 West Street
Rosenberg, TX 77471


(281) 324-0908
9am – 6pm M-F (CDT)
We Ship World Wide
We also speak Spanish

SUBSCRIBE TO OUR NEWSLETTER

 

We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!

Made in USA High Quality White Plus LED Strip
SIRS-E Green Logo

Copyright © 2024 SIRS-E® All Rights Reserved – 3307 West Street, Rosenberg, TX 77471

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. OK
Go to Top