-
5050 White LED Strip Bridge Coupler (Quick Connect), 10mm wide. Used to join 5050 White SMD LED Strips together. -
- 5050 White LED Strip Coupler (Quick Connect) with Lead wires or Tail wires
- The 5050-CON-C2W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C2W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 White LED Strip
-
- 5050 White LED Strip Extension for Single Color Strips
- Connects to a single color 5050 LED strip-to-strip
- 10mm wide
- 12 in long wire 20AWG
- Use for Neutral White, Warm White, Cold White and any other single color 5050 SMD LED Strip
-
5050 RGB LED Strip Bridge Coupler (Quick Connect), 10mm wide. Used to join 5050 RGB SMD LED Strips together. -
- 5050 RGB LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C4W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C4W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of an 5050 RGB SMD LED Strip
-
- Connector for 5050 LED RGB strip to strip
- 10mm wide
- 12 in long wire
-
Controlling your DMX lights from your computer requires an interface. The Open DMX USB is the lowest cost interface available. Designed for the budget conscientious user who does not require the added features and protection of the DMX USB Pro Mk2. Compatible with a reduced set of programs compared to the DMX USB Pro Mk2 it will still allow control of 512 channels. USB 2.0 input and single DMX512 output (non-isolated), RDM is not supported on this device Downloadable Documentation: Recommended Apps: -
The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO- Dual, fully independent, DMX ports each with full RDM capability
- MIDI input and output ports
- Standalone operation for unattended replay of lighting shows (limit 1 universe)
- One firmware version supports all features
- Aesthetically slim-profile, machined aluminium box
- True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
- Internal frame buffering (preserve data integrity when computer is busy)
- Works at various communication speeds
- Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
- Stores configuration and user data in EEPROM
- Refresh rate configurable from 1 to 40Hz
- Break time configurable from 96uS to 1.3mS
- MaB time configurable from 10.6uS to 1.3mS
- Upgradeable firmware
- Security / software protection API
- Comes with USB and break out cables
- USB Cable
- Break Out Cable (79146 - DB15 to 3DMX)
-
PCB Module connects to the CuesStation 5-Wire network and provides 8 contact closure inputs and 8 digital outputs. -
This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
-
Important Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2
ShopMark Eviota2024-04-02T12:17:21-05:00
