Main 281-324-0908  |  9AM - 6PM M-F (CDT)
Shop2024-04-02T12:17:21-05:00
  • SKU# LED-PIXEL-T-INI-DMX-64mm
    LED Pixel Initial T-Cable, Waterproof for 64mm Pixel. SKU# LED-PIXEL-T-INI-DMX-64mm
  • SKU# LED-PIXEL-T-PW-64mm
    LED Pixel Power T-Cable Waterproof for 64mm Pixel SKU# LED-PIXEL-T-PW-64mm
  • SKU# LED-PIXEL-IN-PW-64mm
    LED PIXEL 64mm Initial Power Waterproof Cable. SKU# LED-PIXEL-IN-PW-64mm
  • Out of stock
    SKU# DMX-TEST-01
    Free Ground Shipping.

    The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.

    How it Works

    • Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
    • Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
    • No LED: If the LED is off then you have pin 2 or 3 cut off.

    High Quality Material

    • Bicolor LED Diode
    • Genuine Neutrik XLR Male 3 Pin
    • 120 ohms, 2 W Resistor Non-Flammable

    Warranty: 1 Year

    SKU# DMX-TEST-01
  • Out of stock
    SKU# DMX-TEST-02
    Free Ground Shipping.

    The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.

    How it Works:
    • Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
    • Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
    • No LED: If the LED is off then you have pin 2 or 3 cut off.

    High Quality Material

    • Bicolor LED Diode
    • Genuine Neutrik XLR Male 3 Pin
    • DMX Adapter 3 Pole Female to 5 Pole Male 70029
    • 120 ohms, 2 W Resistor Non-Flammable

    Warranty: 1 Year

    SKU# DMX-TEST-02
  • Out of stock
    SKU# PELICAN-CASE
    Pelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!
    • Interior (L x W x D): 8.5" x 5.88" x .75"
    • Exterior (L x W x D): 9.28" x 7.56" x 4.35"
    • Weight: 2.1 lbs
    • Includes Pluck-’n-Pick foam set
    • Carry handle, Waterproof, Lockable
    • Room for AC adapter and/or spare batteries
    • Comes in Black only
    Hard Case: PELICAN-CASE-SMALL Reliable protection for any small electronic you may have!
    • Interior (L x W x D): 8.25" x 4.25" x 2.25"
    • Exterior (L x W x D): 9.37" x 5.56" x 2.62"
    • Weight: 1.03 lbs
    • Padded interior
    • Waterproof
    • Room for AC adapter
    • Comes with Carabiner
    • Comes in black only
    SKU# PELICAN-CASE
Go to Top