-
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3FCBLockable cable connector, power-out, screw terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled SKU# NAC3FCB -
SKU# NC4FP-1TECHNICAL DATA Electrical- Number of contacts: 3 - 7 (except MP: 3-6)
- Rated voltage: 50 V ac
- Contact resistance: < 5 m
- Insulation resistance - initial: > 2 G
- - after damp heat test: > 1 G
- -IEC 68-2-30)
- Dielectric strength: 1500 V dc
- Rated current:
- 3 pole: 16 I [A], 2.5/14 mm2/AWG, ≤ 4 C
- 4 pole: 10 I [A], 1.5/16 mm2/AWG, ≤ 7 C
- 5 and 6 pole: 7.5 I [A], 1.0/18 mm2/AWG, ≤ 7 C
- 7 pole: 5 I [A], 1.0/18 mm2/AWG, ≤ 9 C
- Lifetime: > 1000 mating cycles
- Insertion / withdrawal force: ≤ 20 N
- Retention method (Female versions only): - standard: latch lock
- "-0" version: retention spring
- Separating force: ≤ 20 N
- Shell: ZnAl4Cu1, gal Ni or black Cr plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: - female (3 pole): CuSn6
- female (4-7pole) & male: CuZn39Pb3
- Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
- Latch lock & spring: CK 67 steel, treated
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# DMXTENDERDMXtender A mountable sturdy CAT-5 cable extender DMXtender makes it possible to connect two CAT-5 cables together. The DMXtender can be mounted on a DIN rail, lighting rig, wall, etc. The sturdy design of the DMXtender makes it suitable for professional use. Together with the CPoint XLR-RJ45 adapter, a DMX512 network can be built very quickly and at a very low cost. With the CPoint DMXcompander, you can run 1536 channels in one CAT5 cable. Product Features- Use to connect two CAT-5 cables together to make a cable extension
- Gold-plated pins on RJ45 connectors
- Sturdy molded housing with non-slip grip
- Mountable on a DIN rail, lighting rig, wall, etc.
- Mountable with 5mm/0.2” screws or cable tie
- Weight including packaging, 28.4g/1.00oz
- EAN13 Barcode on the packaging
- Lightweight packaging
- Easy to use
- RoHS, REACH, and California Prop65 Certified
- Wall Mount
- Rail Mount
- Rig Mount
-
SKU# DMXCOMPDMXcompander RJ45 DMX Compander 3 DMX Universes Over 1 CAT5 Cable DMXcompander makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data pairs, one pair is used as the 0V reference and the other three pairs are used for DMX512 Data+ and Data-. Through the three RJ45 connectors on the DMXcompander, three DMX512 Universes are "COMpressed" into one CAT-5 cable through the Universe 1+2+3 RJ45 connector. At the other end of the CAT-5 cable, another DMXcompander can be used to "exPAND" the DMX512 Universes again, making them available through the three RJ45 connectors. Together with CAT-5 cables and CPOINT's XLR RJ45 adapters, a DMX512 network can be set up very quickly and at a very low cost Product Features- Three DMX512 Universes (1536 channels) combined into one CAT-5 cable
- RJ45 connectors are used for connection with inexpensive CAT-5 cables
- Gold-plated pins on RJ45 connectors
- Sturdy molded housing
- Mountable on DIN rail
- Mountable in the lighting rig
- Use as a flexible DMX outlet
- Mountable with 5mm/0.2” screws or cable tie
- Weight including packaging, 49g/1.73oz
- EAN13 Barcode on the packaging
- Lightweight packaging
- Easy to use
- RoHS, REACH, and California Prop65 Certified
-
SKU# RJ45-DMXTERM-120-XXRJ45-DMXTERM-120 or RJ45-DMXTERM-120-2U is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. is an RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections are created at the end of the cable, causing problems that are very difficult to find. Avoid this by terminating the end of the cable. -
SKU# XLR3-TERM XLR5-TERMDMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES- A 120 Ohm DMX512 Terminator in an XLR connector
- Two XLR versions available, male 3-pin or male 5-pin
- Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment
- Use to avoid data signals being reflected from the end of the data cable
- Very robust, rugged molded housing with non-slip grip
- Product Weight (including packaging): 31g / 1.1oz
- Gold-plated pins on the connector
- Easy to use
- Low cost
- RoHS, REACH, and California Prop65 Certified
-
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# LED-PS24V-320W67-ULBFeatures- IP67, PFC, Metal Case
- Full range AC input: 90~305Vac
- Operating case temperature: -40~+90°C
- UL8750 type HL LED power supply
- Meet 4kV surge immunity level (IEC61000-4-5)
- Built-in active PFC
- IP67 durable aluminium enclosure
- High efficiency
- Compatible dimmer types: 1-10Vdc dimmer, 10V PWM dimmer, or resistance dimmer
- Protections: short circuit / over current / over voltage / over temperature
- Applications: LED electric display, lighting, LED street lighting and indoor/outdoor lighting
- MEAN WELL 7 year warranty
-
SKU# PS12V300W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V300W-MAG -
SKU# PS12V200W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V200W-MAG -
SKU# PS12V150W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V150W-MAG -
SKU# PS12V100W-MAGMagnitude’s Magnetic 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low-profile aluminum enclosure that includes 2 knockouts, making it the perfect choice for various LED installations. Its electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher, it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V100W-MAG -
SKU# PS24V96W-ELEMagnitude’s 24V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS24V96W-ELE -
SKU# PS12V60W-ELEMagnitude’s 12V dimmable LED driver is class 2 rated and designed to operate with any TRIAC (Leading edge) dimmer switch. It is encased in a low profile aluminum enclosure that includes 2 knock-outs, making it the perfect choice for various LED installations. It's electrical specification includes auto reset, over current and short circuit protection, and with the efficiency of 90% and higher it allows the driver to operate at low temperatures. Quick Links: SKU# PS12V60W-ELE -
SKU# LED-PS05V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 200 W
- Output Voltage: 5 V
- Output Current: 40 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS05-60W-ULImportant Features:- Input: 88-264VAC
- Efficiency: 79%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Maximum Output Power: 60 W
- Output Voltage: 5 V
- Output Current: 12 A
- Output Connector Type: Screw Terminal Block
- Size: 5"L x 3.8"W x 1.5"H
- Weight: 1 lb.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS05V-30W-ULImportant Features:- High efficiency, up to 85.5%
- Protection against short circuit, over current, over voltage and over temperature
- Class I power unit, with FG
- UL Listed, suitable for dry and damp locations
- 3 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 12 V
- Output Current: 37.5 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-260W-ULImportant Features:- Protections: Short circuit / Overload / Over voltage/Over temperature
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC, 127 VDC to 431 VDC
- Maximum Output Power: 264 W
- Output Voltage: 12 V
- Output Current: 22 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-200W-ULImportant Features:- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Efficiency: 85%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- Built-in constant current limiting circuit
- LED indicator for power on
- Fixed switching frequency at 90KHz
- 100% full load burn-in test
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 254-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.5"L x 4.5"W x 2.0"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-200W40-ULImportant Features:- Input: 90-132VAC / 180-264VAC selectable by switch
- High Efficiency
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Withstand 300VAC surge input for 5 seconds
- LED indicator for power on
- UL Recognized
- Non-Waterproof
- 3 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90-132VAC / 180-264VAC @ 47-63Hz selectable by switch, or 240-370VDC
- Maximum Output Power: 204 W
- Output Voltage: 12 V
- Output Current: 17 A
- Output Connector Type: Screw Terminal Block
- Size: 8.5"L x 4.5"W x 1.2"H
- Weight: 2.1 lbs.
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-80W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- UL Listed, suitable for dry and damp locations
- Non-Waterproof IP40
- 5 years warranty
- For use in the USA & Europe
- Includes PC-4F Cable
- 1 Output
- Input Voltage: 90 VAC to 264 VAC, 127 VDC to 370 VDC
- Output Power: 80 W
- Output Voltage: 12 V
- Output Current: 6.67 A
- DC Output Connector: 5.5 mm Barrel Plug
- Cord Length: 1 m
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS12V-60W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- Class 2 Power Supply
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-450W-ULImportant Features:- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Efficiency: 83%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Ripple and Noise (mV p-p): 200
- Built-in remote sense function
- LED indicator for power on
- Switch-selectable AC input
- Load Regulation: 1.0%
- Line Regulation: 0.5%
- UL Recognized
- Non-Waterproof IP40
- 2 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 450 W
- Output Voltage: 24 V
- Output Current: 18.8 A
- Output Connector Type: Screw Terminal Block
- Minimum Isolation Voltage: 3000V
- Size: 8.9"L x 4.9"W x 2.0"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-320W-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 95%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- Function Options: Output adjustable via potentiometer
- UL Recognized
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 132 VAC, 180 VDC to 264 VDC
- Maximum Output Power: 320.0 W
- Output Voltage: 24 V
- Output Current: 13.3 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: 10"L x 3.5"W x 1.7"H
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-96W67-ULImportant Features:- Input: 90 VAC to 305 VAC
- High Efficiency up to 93%
- Protections: Short circuit / Overload / Over voltage/Over temperature
- Cooling by free air convection
- Built-in active PFC
- UL Recognized
- Class 2 Power Unit
- IP67 durable aluminum enclosure
- 7 years warranty
- For use in the USA & Europe
- 1 Output
- Input: 90 VAC to 305 VAC
- Maximum Output Power: 96.0 W
- Output Voltage: 24 V
- Output Current: 4 A
- Enclosure: Metal housing with class I design
- Mounting Style: Chassis
- Size: L220 X W68 X H38.8 mm
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
- Wet Environment
-
SKU# LED-PS24V-150W67-UL-XXImportant Features:- MEAN WELL constant voltage economical LED power supply
- Operating temperature: -25~+65°C
- Listed in UL Sign Component Manual (SAM)- UL879
- Class II AC input (two wires-no FG connection)
- IP67 fully insulated plastic case
- Protections: short circuit / over load / over voltage / over temperature
- 2 year warranty
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# LED-PS24V-90W-ULImportant Features:- High efficiency, up to 91%
- Protection against short circuit, over current, over voltage and over temperature
- Class II power unit, no FG
- UL Listed, suitable for dry and damp locations
- Waterproof IP67
- 5 years warranty
- For use in the USA & Europe
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environments
-
SKU# VLM100W-24The VLM100-24 LED driver is the smallest 24V driver with high efficiency available that is capable of powering up to 96W of LED lighting. FEATURES- Constant Voltage LED Driver (Low Voltage)
- Input Voltage: 120-277Vac, 220- 240Vac
- Output Voltage: 24VDC
- Output Current: 4A
- Output Power: 96W
- UL Class 2 & FC Certified
- 90°C maximum case hot spot temperature
- IP40 - Indoor / Damp
- Dimensions: 5.4 x 1.0 x 0.75 in (L x W x H)
- ERP VLM100W-24
-
SKU# VLM60W-24The VLM60-24 LED driver is the smallest 24V driver with high efficiency available that is capable of powering up to 60W of LED lighting. FEATURES- Constant Voltage LED Driver (Low Voltage)
- Input Voltage: 120V AC, 277V AC
- Output Voltage-Channel 1: 24V DC
- Output Current 1: 2.50A
- Output Power: 60
- UL Class 2 & FC Certified
- High power density of 20 W/in
- IP40 - Indoor / Damp
- Dimensions: 5.10 x 0.75 x 0.75 in (L x W x H)
- ERP VLM60W-24
-
SKU# RF-MZTHMulti-Zone RF Remote Holder for Multi-Zone RF Remotes can be easily mounted to a wall or surface area of your choosing and act as a great complement to your RF remote and controller accessories. SKU# RF-MZTH -
SKU# PC-6SFReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life. Specifications:- Length: 6 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to two 3-pin shroud female(IEC-320-C13)
- Design: Female connectors plug directly into device and male connector plugs into standard outlet
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
- Connects computer to wall outlet
- Stranded unshielded PC or monitor power cable.
- 110/120 volt
- Ideal when you are running out of space on your power/surge protector or wall outlets
SKU# PC-6SF -
SKU# RF-MZTRX-RGBWTech Specs for Controller (RF-MZTRX-RGBW):- Input Voltage: 12V – 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C – 60˚C (-4˚F – 140˚F)
- 1-year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
Tech Specs for Remote(RF-MZTX):- Operating Voltage: DC 3V (2 x AAA batteries – Not Included)
- Ambient Temperature: -20 C – 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High-Quality ABS plastic
- 1-year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in-line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
ShopMark Eviota2024-04-02T12:17:21-05:00
