Name: SIRS Electronics, Inc.
Address: 3307 West Street, Rosenberg, Texas, 77471

Clear LED Strip End Caps for Waterproof LED Strips

SKU# ECXXX-PK10

Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10

Details

Product Inquiry
Vertical Tube DMX Address Writer by SIRS-E

SKU# DMX-TUBE-PROG
Tech Specs:

Color: Black

Address Input: Manual

Display: Digital Display

Data Output: XLR 3-Pin Female

Control: DMX512 Protocol

Power Requirement: 12V DC

Part Number: DMX-TUBE-PROG

Overview: Manually set addresses on vertical tubes with the SIRS-E Vertical Tube DMX Address Writer. This address writer is compatible with most professional lighting software and is fully customizable. Digital display allows for fast and easy access. Use it in combination with LED Vertical Tubes in order to achieve colorful and vivid effects. Applications: Ideal for advertisement and cabaret, landscape, and architectural lighting. Quick Links:

DMX Address Writer Datasheet

SKU# DMX-TUBE-PROG
Details
Product Inquiry
DIN Rail Horizontal Mount Bracket Kit

SKU# DIN-HMB

Kit for mounting CS-810, CS-816 horizontally on DIN Rail. SKU# DIN-HMB

Details

Product Inquiry
Klus Aluminum Extrusion B5554 for 5050 LED Strips

SKU# Klus-B5554
Tech Specs:

Color: Silver

Material: Aluminum

Compatible with Covers: KLUS-17011

Length: 1m (3.28') or 2m (6.56')

Mounting Options: double sided mounting tape, mounting glue, or screws

Certification: CE, UR

Overview: The Klus -B5554 is one of Klus' s interior surface mount extrusion. It's shallow housing is designed for flexible or hard LED strips that are up to 10mm (0.39") wide. The fixture is suitable for illumination of certain areas without visible LED dots. Light transmission may vary depending on LEDs used or desired cover. The shape of the fixture is dedicated to be mounted into ceilings and drywall. The height of the extrusion is designed to produce a single line of light with 2 LEDs strips spaced 15mm from the cover. Extrusion can be mounted to a surface with the use of mounting springs. On its own, profile is not waterproof and it is not recommended to be applied if directly exposed to weather conditions. This extrusion is designed to be used primarily for interior lighting. When combined with a proper cover and end caps , this setup is capable of withstanding most weather conditions, UV radiation and is a great fire retardant. This standard quality fixture is great for installations in order to add that final touch to your project, indoors or out. This product is compatible with SIRS-E-LED Strips including:

5050 RGB, 5050 RGBW, 5050 DMX, 5050 Waterproof, or 5050 White variants

3528 Single Color or 3528 White variants

3528 Waterproof variants

Note: This product is compatible all SIRS-E-LED Strip variants. Applications:

Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This include Cove, Edge and Contour lighting.

Easy installation dedicated for room- and deco-light!

**To see how many meters you can use together, refer to the controllers specs. Quick Links: Klus-B5554-Data-Sheet Klus Architectural Extrusion Applications Sheet SKU# Klus-B5554
Details
Product Inquiry
Klus Aluminum Extrusion B1888 for 5050 and 3528 LED Strips

SKU# Klus-B1888
Tech Specs:

Color: Silver

Material: Aluminum

Length: 1m (3.28') or 2m (6.56')

Compatible with Covers: KLUS 1547,KLUS 1548

Mounting Options: Double Sided mounting tape, KLUS 1072

Certification: CE, UR

Overview: The Klus 1547 is one of Klus' s most simple and efficient fixture. It's shallow housing is designed for flexible or hard LED strips that are up to 10cm (0.39") wide. The fixture is suitable for illumination of certain areas without visible LED dots. Light transmission may vary depending on LEDs used or desired cover. The shape of the fixture makes for an easy installation either by adhesive or mounting bracket. On its own, profile is not waterproof and it is not recommended to be applied if directly exposed to weather conditions. This extrusion is designed to be used primarily for interior lighting . When combined with a proper cover and end caps, the setup is capable of withstanding most forms of dust and undesirable elements that can make LED strips dirty or cause them to deteriorate. This standard quality fixture is great for installations in order to add that final touch to your project. This product is compatible with most SIRS-E -LED Strips including:

5050 RGB or 5050 White variants

3528 Single Color or 3528 White variants

3528 Waterproof variants

Note: This product is not compatible with 5050 Waterproof SIRS-E-LED Strip variants. Applications:

Ideal for walkways, rails, stairs, signs, advertisement and cabaret, cabinet, furniture, landscape and architectural lighting. This includes Cove, Edge and Contour lighting.

Easy installation dedicated for room-and deco-light!

**To see how many meters you can use together, refer to the controllers specs. Quick Links: Klus-B1888 Data Sheet SKU# Klus-B1888
Details
Product Inquiry
5050 RGBW LED Strip Bridge Coupler

SKU# 5050-CON-C5C5

5050 RGBW LED Strip Bridge Coupler (Quick Connect), 12mm wide. Used to join 5050 RGBW SMD LED Strips together. SKU# 5050-CON-C5C5

Details

Product Inquiry
5050 RGBW LED Strip Coupler with Lead or Tail Wires

SKU# 5050-CON-C5W
5050 RGBW LED Strip Coupler (Quick Connect) with Lead

The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires

The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires

12mm wide

12 in long wire

Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip

Quick Links:

Couplers Color Code Diagram

SKU# 5050-CON-C5W
Details
Product Inquiry
5050 RGBW LED Strip Extension

SKU# 5050-CON-C5WC5
Connector for 5050 LED RGBW strip to strip

12mm wide

12 in long wire

Quick Links:

Couplers Color Code Diagram

SKU# 5050-CON-C5WC5
Details
Product Inquiry
ACCLAIM Lighting ART 500 USB DMX Wall Mount Controller

SKU# ART500
The Art 500 is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the most effective control solution for architectural control. Included is the ART 500 software package, which others an easy-to-navigate interface combined with powerful control features. Not only can it be controlled remotely from an iPhone or iPad, but the ART500 is capable of learning sunset and sunrise times with integrated GPS coordination. This feature is excellent for installations that automatically need to light on at a certain time without relying on a photocell switch or other similar devices. Also available on the beautiful slim touch panel is an LCD screen which allows you to read all the different zones depending on how the user may have labeled them. Also, add pictures of the different zones in your installation displayed on the LCD, making it even easier to recognize which zone you select. Available in black and white colors, the ART500 is ready to bring any room into life with unparalleled lighting control. WHAT'S IN THE PACKAGE?

ART500 Controller

USB Cable

Micro SD Card

Power Adapter

Downloadable Documentation:

Datasheet

Install Guide

Dimensions
Details
Product Inquiry
Swisson Wireless DMX Transmitters & Receivers

SKU# SWISSON-XWL-TR
XWL-T-CRMX-3: 3-Pin XLR CRMX Wireless DMX Transmitter

XWL-T-CRMX-5: 5-Pin XLR CRMX Wireless DMX Transmitter

XWL-R-CRMX-3: 3-Pin XLR CRMX Wireless DMX Receiver

XWL-R-CRMX-5: 5-Pin XLR CRMX Wireless DMX Receiver

XWL-T-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Transmitter

XWL-T-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Transmitter

XWL-R-W-DMX-3: 3-Pin XLR W-DMX Wireless DMX Receiver

XWL-R-W-DMX-5: 5-Pin XLR W-DMX Wireless DMX Receiver

The XWL series encompasses both, W-DMX as well as CRMXcompatible and compact wireless DMX transmitters and receivers. W-DMX from Wireless Solution and CRMX from LumenRadio are the leading technologies for wireless DMX transmission. With a latency of only about 5 ms, CRMX and W-DMX guarantee a DMX connection with the properties and reliability level equivalent to those of a wired link.
Several transmitters can be operated in parallel, each of which is easily linkable to any number of receivers and capable of handling one full universe of 512 DMX channels.

All XWL products are equipped with M10/M12 and 3/8" threads to provide a variety of installation possibilities, such as mounting on a microphone stand.

Wireless DMX receiver (XWL-R models)

Wireless DMX transmitter (XWL-T models)

Available with W-DMX™ or CRMX™

M10/M12 threads for truss mount

3/8” thread for mounting on a microphone stand

Built-in power supply (powerCON connected)

Compact, rugged housing

Quick Links:

XWL User Manual

SKU# SWISSON-XWL-TR
Details
Product Inquiry
Swisson DMX Wireless Opto-Splitter

SKU# XSW-TR-SERIES
2 Year Warranty The XSW combines CRMX wireless DMX technology with our entire line of DMX splitters. The XSW can operate as a DMX transmitter or as a DMX receiver at the press of a button. The DMX splitter functionality is always available regardless of whether the device is configured as a transmitter or receiver. If only the splitter function is used, the wireless part is switched off. The splitter offers one input port, a thru port and 4 individually optically isolated output ports. Multiple radio links can be operated at the same time, allowing a setup with multiple DMX Universes. Multiple receivers can be connected to a single transmitter. A variety of wireless configurations can be built up with the same XSW components.

XSW-TR-CRMX-3B: 3-Pin XLR CRMX Transceiver Box

XSW-TR-CRMX-3R: 3-Pin XLR CRMX Transceiver Single Rack

XSW-TR-CRMX-5B: 5-Pin XLR CRMX Transceiver Box

XSW-TR-CRMX-5R: 5-Pin XLR CRMX Transceiver Single Rack

XSW-TR-W-DMX-3B: 3-Pin XLR W-DMX Transceiver Box

XSW-TR-W-DMX-3R: 3-Pin XLR W-DMX Transceiver Single Rack

XSW-TR-W-DMX-5B: 5-Pin XLR W-DMX Transceiver Box

XSW-TR-W-DMX-5R: 5-Pin XLR W-DMX Transceiver Single Rack

Downloadable Documentation:

Manual

SKU# XSW-TR-SERIES
Details
Product Inquiry
Swisson DIN Rail Splitter Programs

SKU# SWISSON-DIN-RAIL
ISP-4D-TERM: DMX DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4D-RJ45A: DMX DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4D-RJ45B: DMX DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)

ISP-4R-TERM: RDM DIN Rail Splitter Program; 4-Outputs, PLUGGABLE SCREW TERMINALS ISP-4R-RJ45A: RDM DIN Rail Splitter Program; 4-Outputs, RJ45A DMX, PINOUT ANSI E1.11 (1:+, 2:-, 7&8:COM) ISP-4R-RJ45B: RDM DIN Rail Splitter Program; 4-Outputs, RJ45B DMX, PINOUT ALTERNATIVE (1:-, 2:+, 3:COM)

Tech Specs:

DMX splitter / booster

DMX repeater

LED display; signal, power, RDM

Input optically isolated

Each output individually optically isolated

RDM support (optional)

Extend DMX lines infinitely with the splitter

Rugged metal housing

Built-in termination

RJ-45 and pluggable screw terminal variants

DC power input, 10-48V DC, max. 400mA

Isolation between input and outputs as well as full isolation between each output

Dimensions: L=125mm, W=90mm, H=56mm

2 Year Warranty

The ISP-4 splitters also act as repeaters, and thus they may be used for transporting a DMX signal across larger distances. The DMX splitters of the ISP-4 line of products boost an incoming DMX signal and provide it on four output ports. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. DMX signals often get disturbed by the environment or even by the devices connected to the signal line. An ISP-4 splitter may completely clear the disturbances if it is connected at a location where the signal is still “readable”. Providing four individually optically isolated outputs, as well as an optically isolated input, the ISP-4 splitters may prevent harmful voltages applied to a given port from affecting the other ports and damaging the connected equipment. The bidirectional ISP-4R variants work within DMX / RDM environments, as well as in pure DMX environments. Therefore, ISP-4R splitters are a good solution not only for current RDM users, but also for those who expect to use RDM in the future. The ISP-4D variants on the other hand only work with DMX, while they ignore any RDM data. ISP-4 splitters are DIN rail mountable and powered by an external power supply unit. Quick Links:

DIN Rail Splitter User Manual

DIN Rail Splitter Data Sheet

SKU# SWISSON-DIN-RAIL
Details
Product Inquiry