Main 281-324-0908  |  9AM - 6PM M-F (CDT)
Shop2024-04-02T12:17:21-05:00
  • Out of stock
    SKU# PELICAN-CASE
    Pelican Cases are unbreakable, watertight, airtight, and corrosion proof. Protect any electronic you have from whatever mother nature may throw your way. If you're working on a production set which involves an outdoor environment and are exposed to the elements, these cases offer unprecedented protection for any valuable electronic tools. Whether traveling in the rain, or dealing with elevated installations, Pelican Cases provide a level of assurance against clumsy accidents and unfortunate events. Heavy Duty Case: PELICAN-1150-HEAVY Extra, heavy duty protection for your most prized electronic possessions!
    • Interior (L x W x D): 8.5" x 5.88" x .75"
    • Exterior (L x W x D): 9.28" x 7.56" x 4.35"
    • Weight: 2.1 lbs
    • Includes Pluck-’n-Pick foam set
    • Carry handle, Waterproof, Lockable
    • Room for AC adapter and/or spare batteries
    • Comes in Black only
    Hard Case: PELICAN-CASE-SMALL Reliable protection for any small electronic you may have!
    • Interior (L x W x D): 8.25" x 4.25" x 2.25"
    • Exterior (L x W x D): 9.37" x 5.56" x 2.62"
    • Weight: 1.03 lbs
    • Padded interior
    • Waterproof
    • Room for AC adapter
    • Comes with Carabiner
    • Comes in black only
    SKU# PELICAN-CASE
  • Out of stock
    SKU# DMX-TEST-02
    Free Ground Shipping.

    The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.

    How it Works:
    • Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
    • Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
    • No LED: If the LED is off then you have pin 2 or 3 cut off.

    High Quality Material

    • Bicolor LED Diode
    • Genuine Neutrik XLR Male 3 Pin
    • DMX Adapter 3 Pole Female to 5 Pole Male 70029
    • 120 ohms, 2 W Resistor Non-Flammable

    Warranty: 1 Year

    SKU# DMX-TEST-02
  • Out of stock
    SKU# DMX-TEST-01
    Free Ground Shipping.

    The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.

    How it Works

    • Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
    • Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
    • No LED: If the LED is off then you have pin 2 or 3 cut off.

    High Quality Material

    • Bicolor LED Diode
    • Genuine Neutrik XLR Male 3 Pin
    • 120 ohms, 2 W Resistor Non-Flammable

    Warranty: 1 Year

    SKU# DMX-TEST-01
  • SKU# LED-PIXEL-IN-PW-64mm
    LED PIXEL 64mm Initial Power Waterproof Cable. SKU# LED-PIXEL-IN-PW-64mm
  • SKU# LED-PIXEL-T-PW-64mm
    LED Pixel Power T-Cable Waterproof for 64mm Pixel SKU# LED-PIXEL-T-PW-64mm
  • SKU# LED-PIXEL-T-INI-DMX-64mm
    LED Pixel Initial T-Cable, Waterproof for 64mm Pixel. SKU# LED-PIXEL-T-INI-DMX-64mm
  • SKU# DMX-TUBE-PROG
    Tech Specs:
    • Color: Black
    • Address Input: Manual
    • Display: Digital Display
    • Data Output: XLR 3-Pin Female
    • Control: DMX512 Protocol
    • Power Requirement: 12V DC
    • Part Number: DMX-TUBE-PROG
    Overview: Manually set addresses on vertical tubes with the SIRS-E Vertical Tube DMX Address Writer. This address writer is compatible with most professional lighting software and is fully customizable. Digital display allows for fast and easy access. Use it in combination with LED Vertical Tubes in order to achieve colorful and vivid effects. Applications: Ideal for advertisement and cabaret, landscape, and architectural lighting. Quick Links: SKU# DMX-TUBE-PROG
  • SKU# LED-PIXEL-TERM4
    LED Pixel Power Terminator for 4 Way cable 120 Ohms. SKU# LED-PIXEL-TERM4
  • SKU# LED-PIXEL-IN-PW
    LED Pixel Power Supply Cable, Waterproof, 2 Pin Male to Tips. Use this cable to connect your power supply to the initial cable LED-PIXEL-T-INI-DMX and in between the chain using LED-PIXEL-T-PW. SKU# LED-PIXEL-IN-PW
  • SKU# RJ45-TERN-MK2
    Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2
  • SKU# LED-PIXEL-T-PW
    T Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors
    • 4 Pin Waterproof lock connection MALE
    • 4 Pin Waterproof lock connection FEMALE
    • 2 Pin Waterproof lock connection MALE
    SKU# LED-PIXEL-T-PW
  • SKU# DMX-TUBE-CABLE
    DMX Vertical Tube 3 ends 4 pin Cable (2 female and 1 male), use this cable to add DMX Vertical Tubes LED-VERT-TUBE-1M to the Chain. SKU# DMX-TUBE-CABLE
Go to Top