-
SKU# CS-STATIONPlease Note: The CueStation Mystique and Ultra series come standard with White plastic housing and no LEDs. If you would like to customize your CueStation, please specify your color choice from this chart and include it in the "Order Notes" section at checkout or call us at (281) 324-0908 The CueStation family of button stations are attractive, sophisticated and customizable – perfect for use in projects that require a small panel of buttons that can control automated lighting, audio, show playback and other similar actions. Choose from digitally networked stations or simple passive switches, different button styles, LED options, housing colors, engraving options and much more. Use CueStations as a remote control accessory for our CueServer lighting automation processors or your own custom projects. Mystique Series The Mystique series features 1/2″ (13mm) square buttons available in 1, 2, 3, 4 or 8 button configurations. This station provides a soft touch and allows the keycaps to be engraved. Each button has an indicator LED next to its top-right or top-left corner (depending on which side of the station the button is located). Individual key caps may be engraved or the top of each column may be engraved on the cover plate. Ultra Series The Ultra series features high-tech horizontal buttons with LED indicators on the left side of the buttons. This station provides a designer style with tactile button response. The Ultra series is available in 1 through 6 button configurations. Engraving is available on the Ultra series on the housing area above each button. Passive Wire Network Passive CueStations simply provide dry-contact switch closures for direct connection to devices that are expecting a contact closure to activate an event. There is a single terminal for each switch plus an extra terminal which is the "switch common" on the back of the station. For example, on a six button station, seven conductors would be needed (the six switches, plus one common). The Passive CueStation is designed to be directly connected to the contact closure inputs and digital output ports of a CueServer processor, however, these stations can be used in a wide variety of custom applications as well. Digital 2-Wire Network This technology uses a topology free and polarity free simple 2-wire network to connect the individual stations together so that any combination of home-run and daisy-chained connections can be made without regard to the polarity of the two conductors. The 2-Wire button stations are controlled by the Universal CueStation Hub, which can power up to 10 individual 2-Wire stations, for a total of up to 80 buttons (and indicators). For systems requiring more than 10 stations, additional Hubs can be used and/or a combination of the 5-Wire stations can be used. The Hub can be connected to the host system by either RS-232 or Ethernet protocols (which are fully documented). Digital 5-Wire Network The Digital 5-Wire Network type of CueStation was designed to provide an increased number of stations on the same network with greater cable distances. This technology uses a 4-wire network to connect the individual stations together in a daisy-chained topology. The 5-Wire button stations are controlled by the Universal CueStation Hub, which can power up to 50 individual 5-Wire stations, for a total of up to 400 buttons (and indicators). For systems requiring more than 50 stations, additional Hubs can be used and/or a combination of the 2-Wire stations can be used. The Hub can be connected to the host system by either RS-232 or Ethernet protocols (which are fully documented). Quick Links: Note: The Ultra Station comes standard with White plastic housing and no LEDs. If you would like to customize your Ultra Station, include your color and LED choice from the table below in the "Order Notes" section at checkout. SKU# CS-STATION -
SKU# CS-NET-HUBSThe CueStation Universal Network Hub is a multi-purpose interface for controlling button stations that use either 2-Wire or 4-Wire network technologies. The Hub acts as both a power supply for the stations as well as a gateway for allowing host systems to receive button events and instruct the button indicators to illuminate in various ways. The Network Hub is not used with Passive stations. The Network Hub communicates with the host system by RS-232 messages and/or Ethernet messages. Note: Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. ST-HUB | Universal Hub For controlling both 2-Wire and 5-Wire CueStations via RS-232, includes switching power supply ST-HUB-EN | Universal Hub w/ Ethernet For Controlling both 2-Wire and 5-Wire CueStations via RS-232 and/or Ethernet, includes switching power supply ST-HUBD | Universal Hub DIN For Controlling both 2-Wire and 5-Wire CueStations via RS232, DIN-Rail Mounted, no power supply included ST-HUBD-EN | Universal Hub DIN w/Ethernet For controlling both 2-Wire and 5-Wire CueStations via RS232 and/or Ethernet, DIN-Rail Mounted, no power supply included Key Features- Controls both 2-Wire and 5-Wire CueStations
- Communicates with the host system via RS-232 and/or Ethernet
- Powered by 12-24V AC or DC
- Removable terminal blocks
- Small size
- CueStation Universal Network Hub
- Power Supply
- Mounting Flanges
- Instructions
-
SKU# SS-USB-STICKFor use with SceneStation Studio software for Mac or Windows computers. The SceneStation USB Stick is used on your Mac or PC computer with the free SceneStation Studio software to remotely manage, control and program one or more wireless SceneStations. The adaptor provides the 2.4GHz communication link between the computer and the SceneStation Network. All wireless SceneStations can be protected by a Security PIN to allow only authorized users to be able to control or edit a station. SS-USB-STICK | USB Stick Wireless USB adaptor for use with SceneStation Studio and your Mac or PC. -
SKU# SCENESTATION-3SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. SceneStation is entirely self-contained in a single gang, wall-switch sized unit. Perfect for restaurants, high-end residential, trade show booths, and more, SceneStation can control nearly any DMX device (RGB fixtures, moving lights, dimmers, effects, etc.), while also remaining very simple for the end user. SS-305 | Architectural SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes), flushplate Unit, pluggable wiring block and mounting hardware. Meant to be wall-mounted. SS-310 | Portable SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes) in a portable enclosure with 5-Pin XLR jacks and power supply (AC-12). Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. SS-315 | Portable SceneStation 3 Kit Includes SceneStation in a portable enclosure with 5-Pin XLR jacks, power supply (AC-12), SceneStation User's Remote and USB StationLink Adaptor, all enclosed in a protective carrying case. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. Key Features- Completely Self-Contained
- 64 Scene Capacity
- Static, Sequential, Toggle, Chase, Momentary & Pile-On Modes for Each Button
- Built-in Effects Engine for creating dynamic scenes
- Programmable RGB Backlit Buttons
- Includes 2.4GHz Wireless SceneStation Module
- DMX-512 Output (44Hz)
- DMX Input Snapshot and/or Manual Channel Editing
- IR Remote Setup and Operation
- Optional "Power-On" Scene Selection
- AC or DC Operation
-
SKU# DMX-RJ45-SPLITTERThe IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supplyFeatures:
- RJ45 Ports for easy connection in DMX systems that use Category 5 cables
- DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters
- 8 Independently generated and protected output ports
- Each port can drive a DMX line an additional 1,500 feet (500 meters)
- Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports
- Can be used in systems wired for DMX512 or Color Kinetics® devices
- User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes
- User-selectable input line termination switch
- Ultra-compact design provides 8 DMX ports just 14in2 (90cm2)
Configuration:
The IT-SP8R has two user-selectable configuration switches.
Termination:The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON.
Polarity:
There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert.
CAT5 DMX Wiring:
The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring.
When the Polarity switch is set to "Normal", the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to "Invert", the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa.
Quick Links: SKU# DMX-RJ45-SPLITTER
-
SKU# POCKET-CONSOLEBasic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:- Optional Pelican Cases are available
- small, lightweight, portable and designed to be hand held
- Levels are set using eight faders (slider pots)
- Each FADER has an associated bump button
- 512 dimmer addresses are patchable to any of the eight faders
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90 day warranty
- Basic Pocket Console User Manual
- Playback 8 Pocket Console User Manual
- dmXact Pocket Console User Manual
- MultiPatch Pocket Console User Manual
- 24-Eight Pocket Console User Manual
-
SKU# NEUTRIK-XX-33 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.SKU# NEUTRIK-XX-3- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well proteced against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# DMX-2PRPlease Note: - Price is per foot. HORIZON - 2 Pair, 24AWG, Stranded bare copper, cellular polyethylene insulated, with overall shield and PVC jacket, digital(DMX512) wire. SKU# DMX-2PR -
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
