Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  • SKU# IA-HW-001018
    The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality. Features: Direct Connection Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. Quality Output Of 8 Universes Each device drives up to 1.360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports. SPI Converter Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Use USB or Art-Net for all the great features of the MADRIX software. MADRIX Sync Mode Simply use several units at the same time for larger projects. Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. Invaluable Features The device is ready within seconds after startup. Its firmware is upgradable for future features. HTP Merging is automatically available for two Art-Net sources. Use the built-in web tool for configuration. Connectivity
    • 2x OUT (screw terminals)
    • 1x RJ45 Ethernet port
    • 1x USB port
    • 1x Power (screw terminal)
    Package Contents
    • MADRIX NEBULA
    • Set of screw terminals (2x 4-pin and 1x 2-pin)
    • USB cable
    • MADRIX software (license not included)
    • 2 wall-mount brackets
    Supported LEDs
    • APA101
    • APA102
    • APA104
    • APA106
    • LPD6803
    • LPD8806
    • SM16703
    • SM16716
    • TLS3001
    • TLS3008
    • TM1804
    • TM1809
    • TM1812
    • TM1829
    • UCS1903
    • WS2801
    • WS2803
    • WS2811
    • WS2812
    • WS2812B
      Additional LED types will be supported with future firmware updates. Quick Links: SKU# IA-HW-001018
  • SKU# IA-HW-001019
    The MADRIX STELLA is a dedicated control interface for Art-Net and DMX512 that is designed for high quality and practicability in permanent LED installations. Features: Art-Net Node Art-Net data is directly converted to DMX512. Optimize for short distances to your LEDs and decentralize cabling to cover any distance to the device using Ethernet network. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. 2 DMX-IN/OUT Directly connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX universes per unit as input and/or output, eliminating the need for XLR connectors as a result. Simply use several units at the same time for larger projects. Easy Configuration MADRIX STELLA offers powerful features, especially in combination with MADRIX. Take full advantage of pixel mapping and voxel mapping. Managing the device is still quick and easy. MADRIX Sync Mode Only MADRIX software and hardware allow you to fully synchronize Art-Net data for all output ports and across multiple devices to get an optimal image on the LEDs without visual interruptions. Designed For DIN Rails Or Walls Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 6 indicators quickly show the device status with the option to turn them off. 3rd-Party Controllers MADRIX STELLA complies with the official Art-Net specifications and can be used as a regular Art-Net unit with your other consoles, controllers, or software solutions. MADRIX DMX512 USB Interface Alternatively, you can choose to connect the unit as a plug-and-play solution to your computer and the MADRIX software using any USB 2.0 port. Invaluable Features The device is ready within seconds after startup. HTP Merging is automatically available for two
 Art-Net sources. You can change specific device settings using the built-in web configuration tool. Connectivity
    • 2x DMX-IN/OUT (screw terminals)
    • 1x RJ45 Ethernet port
    • 1x USB port
    • 1x Power (screw terminal)
    Package Contents
    • MADRIX STELLA
    • Set of screw terminals (2x 3-pin and 1x 2-pin)
    • USB power supply, USB cable, world adapters kit
    • MADRIX software (license not included)
    • 2 wall-mount brackets
    Quick Links: SKU# IA-HW-001019
  • SKU# XPD-DMX-AB-SPLITTER-MIX
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R8-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 3-pin XLR XPD-28-5R2-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 6 x 5-pin XLR and 2 x 3-pin XLR XPD-28-5R4-US 2:8, rack mountable DMX and RDM splitter, inputs: 5-pin XLR, outputs: 4 x 5-pin XLR and 4 x 3-pin XLR XPD-28-5R6-US 2:8, rack mountable DMX and RDM splitter, inputs 5-pin XLR, outputs: 2 x 5-pin XLR and 6 x 3-pin XLR Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19″ Rack mountable
    Quick Links: SKU# XPD-DMX-AB-SPLITTER-MIX
  • SKU# XPD-DMX-AB-SPLITTER
    XPD-28 splitters boost, refresh and distribute the DMX signals of two inputs onto eight outputs. This allows for safely going beyond the 32 devices limit of the DMX standard, as well as for building star topologies. Moreover, the XPD-28 can be used as a repeater in order to transport a DMX signal across larger distances just as well. XPD-28-5R-US 2:8, rack mountable DMX and RDM splitter, 5- pin XLR XPD-28-3R-US 2:8, rack mountable DMX and RDM splitter, 3- pin XLR XPD-28-8R-US 2:8, rack mountable DMX and RDM splitter, RJ45 Features
    • OLED display.
    • Metal button/ potentiometer
    • Amplifies/ boosts DMX
    • Splits and cleans DMX signal
    • RDM Protocol
    • Enhanced DMX data regeneration
    • Individual optical isolation on all ports
    • Realtime DMX monitoring
    • DMX Framerate display
    • DMX channel overview
    • 19" Rack mountable
      Quick Links: SKU# XPD-DMX-AB-SPLITTER
  • SKU# XSR-OPTO-SPLITTER-MIX
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. XSR-5R2-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. XSR-5R-5R5-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. XSR-5R-3R-US The RDM & DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSR-OPTO-SPLITTER-MIX
  • SKU# XSR-5R2-US
    The Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. Swisson XSR-5R2-US The RDM & DMX Opto-Splitter 5 Pin XLR In & Thru – 3-5 Pin and 2-3 Pin Out XLR Single Rack includes hardware for mounting onto racks, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • R Switch to toggle between RDM&DMX compatibility or DMX only mode
    • LED Display
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSR-5R2-US
  • SKU# XSP-OPTO-SPLITTER-MIX
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – three 5 Pin and two 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, six 5 Pin XLR outputs and four 3 Pin XLR outputs. Swisson-XSP-5R-5R5-US The DMX Opto-Splitter 5 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Swisson-XSP-5R-3R-US The DMX Opto-Splitter 5 and 3 Pin XLR In & Thru – five 5 Pin and five 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with one 5 Pin and one 3 Pin XLR input, one 5 Pin and one 3 Pin XLR through port, five 5 Pin XLR outputs and five 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links: SKU# XSP-OPTO-SPLITTER-MIX
  • SKU# XSP-5R2-US
    DMX splitters are the backbone of any DMX512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. Each port is optically isolated and very well protected against transient over voltages. Swisson-XSP-5R2-US The DMX Opto-Splitter 5 Pin XLR In & Thru – 3- 5 Pin and 2- 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, three 5 Pin XLR outputs and two 3 Pin XLR outputs. Features
    • ETL/cETL/CE certified
    • Optical isolation prevents signal disturbances
    • Isolation between input and outputs as well as full isolation between each output
    • Simplify connections and reduce installation and cable cost
    • Easy detection of disturbances by intelligent DMX protocol supervisor
    • Clean and clear amplification of DMX signals
    • DMX line can be terminated by pressing a button
    • Extend DMX lines infinitely with the splitter
    • Strong Power Supply worldwide 5VAC – 276VAC
    • Input (1 universe) 1pcs
    • Through (1 universe) 1pcs
    • Outputs 5 pcs
    • Box version, M10 thread for a clamp and an eye bolt for safety line
    • Dimensions Rack: 19″, 1 Unit, 111 mm, Box: 220x111x44mm
    • 2 Year warranty
    Quick Links:  SKU# XSP-5R2-US
  • SKU# MOD-XXXX
    DMX Modules for CueServer 2 Pro (CS-900) add physical DMX inputs or outputs. SKU# MOD-XXXX
  • SKU# AD-PRO-6-BK
    Tech Specs:
    • 1 - DB-15 Male Connector
    • 6 - 5 Pin XLR Female Neutrik Connectors
    • Length: 19"
    • Color: Black (white XLR cable segments)
    Overview: The AD-PRO-6 Breakout Cable is a custom-built cable for the AD-PRO-6. This unit can be used a replacement cable for your PRO controller or as a backup for your current breakout cable. It is made with high quality materials in the USA. This cable is included with the purchase of the AD-PRO-6 ArtNet to DMX PRO Controller. Features
    • Made with High Quality Horizon Cable
    • Made with High Quality Neutrik Connectors
    • Complies with DMX512 USITT standards
    • Made in the USA.
    Quick Links: SKU# AD-PRO-6-BK
  • SKU# AD-PRO-6-PS
    Tech Specs:
    • 1 -Type A Electrical Male Plug
    • 1 -2.5MM sealed IP68 Power Plug
    • Input: AC 120V
    • Output: DC 12V
    • Current: 1.25A
    • Length: 68"
    • Color: Black (White XLR Cable)
    Overview: The AD-PRO-6 Power Supply is a custom-built power source for the AD-PRO-6. This unit can be used a replacement power supply for your PRO controller or as a backup for your current power supply. It is assembled with high quality materials in the USA. This power supply is included with the purchase of the AD-PRO-6 ArtNet to DMX PRO Controller. Features
    • Made with High Quality Switchcraft Components
    • Assembled in the USA.
    Quick Links: SKU# AD-PRO-6-PS
  • SKU# DIN-HMB
    Kit for mounting CS-810, CS-816 horizontally on DIN Rail. SKU# DIN-HMB
Go to Top