Understanding 5050 LED Strip Datasheets

Contents

5050 LED Datasheet: The Ultimate Guide

One of the most common types of SMD LED Modules are the 5050 SMD LED Module. This type of LED is used for backlighting, home illumination, interior lighting, automobile lighting and many more types of lighting applications.

In this article, we’ve compiled all the different 5050 LED’s that are available along with the technical specifications. We will continue to keep this list updated with the latest information. Be sure to bookmark this page, and share it with your friends.

Update: We’ve now added our new and improved technical datasheets for our latest lines of higher quality LED strips: AcuVivid™ White, AcuVibrant™ RGB, and AcuHue™ RGBW & RGBA series.

ACUVIVID-24CVXX-4016 (2700 K, 4000 K, 5500 K)

The SIRS-E® AcuVivid™ CV White LED strip series consists of High Quality Constant Voltage variants with color temperatures, but not limited to, 2700 K, 4000 K and 5500 K. At a color rendering rating of 95+ CRI, AcuVivid™ provides optimal color consistency and an increased luminous flux with greater efficacy while complying with all safety requirements as defined by UL standards.

Less than 1-Step MacAdam ellipse in the same run, easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

  • High Color Rendering Rating +95 CRI
  • Increased Luminous Flux +330 lm/ft
  • Improved Luminous Efficacy +80 lm/W
  • Minimal Power Consumption 4.1 W/ft
  • Very Low Color Shift Duv +0.0005
  • UL Listed, Class 2 – E479339

The AcuVivid™ series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, and specialized lighting designs.

Delivering superior LED strip lighting with a proven record spanning more than a decade without electrical, chromatic, or color rendering issues. SIRS-E® continues to lead the market place in stability, reliability, and efficiency of LED lighting and lighting control systems.


ACUVIBRANT-12CV-4016

5050-12RGB-6040

The SIRS-E® AcuVibrant™ CV RGB LED strip series, consists of High Quality Constant Voltage variants with the ability to create millions of color “vibrant” rendering options offered by color mixing diodes. AcuVibrant™ provides consistent, color rich illuminations with optimal efficacy while complying with all safety requirements as defined by UL standards.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

  • Increased Luminous Flux +230 lm/ft
  • Improved Luminous Efficacy +50 lm/W avg
  • Minimal Power Consumption 3.6 W/ft
  • UL Listed, Class 2 – E479339
  • 25% more lumen output than our previous RGB series

The AcuVibrant™ series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, bars and specialized lighting designs.

Delivering superior LED strip lighting with a proven record spanning more than a decade without electrical, chromatic, or color rendering issues. SIRS-E® continues to lead the market place in stability, reliability, and efficiency of LED lighting and lighting control systems.


ACUHUE-12CVXX-4016 (2700 K, 5500 K, 590nm)

The SIRS-E® AcuHue™ CV RGBW LED strip series, consists of High Quality Constant Voltage variants with the ability to create billions of color rich rendering options offered by the addition of a fourth color diode to the RGB equation, including 2700 K, 5500 K white diodes or Amber. With optimal luminosity and superior efficacy, AcuHue™ provides for limitless applications while complying with all safety requirements as defined by UL standards.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

  • Increased Luminous Flux +420 lm/ft
  • Improved Luminous Efficacy +60 lm/W avg
  • Minimal Power Consumption 5.75 W/ft
  • UL Listed, Class 2 – E479339

The AcuHue™ series provides solutions for an endless set of applications including commercial, residential, stage & TV studio, theatrical, film sets, cove lighting and specialized lighting designs.

Delivering superior LED strip lighting with a proven record spanning more than a decade without electrical, chromatic, or color rendering issues. SIRS-E® continues to lead the market place in stability, reliability, and efficiency of LED lighting and lighting control systems.


ACUHUE-12CCXX-4016 (2700 K, 5500 K, 590nm)

The SIRS-E® AcuHue™ CC RGBW LED strip series, utilizes Constant Current Control to provide for ideal color consistency with no brightness loss or voltage drop through the use of high quality integrated circuits embedded directly on the flexible strip. AcuHue™ CC has the ability to produce billions of color variations.

Easily mountable utilizing 3M VHB Aero-Grade tape, engineered to dissipate heat and reduce voltage drop via 4 oz flexible PCB.

  • Max run of 32ft /10m with no brightness loss, powered only from one end
  • Increased Luminous Flux +530 lm/ft
  • Improved Luminous Efficacy +125 lm/W
  • Minimal Power Consumption 6.5 W/ft

The AcuHue™ series provides solutions for an endless set of applications including commercial, residential, stage & studio, theatrical, and specialized lighting designs.

Delivering superior LED strip lighting with a proven record spanning more than a decade without electrical, chromatic, or color rendering issues. SIRS-E® continues to lead the market place in stability, reliability, and efficiency of LED lighting and lighting control systems.


5050-LED-WH-DD

White LED Strip 5050

5050 LED WH DD STRIP DATASHEET INFORMATION

LED Density: 18 / ft | 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

5050 SMD LED WH DD POWER CONSUMPTION

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max: 3.52W /ft | 11.54W /m | 57.72W /5m Reel
Current Draw / Input Current / Current Max: 4810mA | 4.81A | per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% | 5m = 16%
Power Drop with V+ In on Both Sides Approx: 1m = 5% 5m = 6%

PHOTOMETRY

Light Color: Neutral White – – 5,500°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen) Tested at full intensity: 465lm/ft | 1524lm/m | 7622lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: 16.4ft | 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in | 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in | 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in | 50mm
Width (Inches | Millimeters): 0.39in | 10mm
Height (Inches | Millimeters): 0.08in | 2.05mm
Cable Leads (Inches | Millimeters): 7in | 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz | 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

5050-LED-WH-DD & 5050-LED-WHWP-DD


5050-LED-WH

White LED Strip 5050

5050 LED WH STRIP DATASHEET INFORMATION

LED Density: 9 / ft | 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

5050 SMD LED WH POWER CONSUMPTION

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max:1.84W /ft | 6.05W /m | 30.24W /5m Reel
Current Draw / Input Current / Current Max: 2520mA | 2.52A | per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 5% | 5m = 12%
Power Drop with V+ In on Both Sides Approx: 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: Neutral White – – 5,500°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen) Tested at full intensity: 232lm/ft | 762lm/m | 3812lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: 16.4ft | 5m
LED Spacing Between Centers (Inches | Millimeters): 1.31in | 33.30mm
LED Spacing Between Edges (Inches | Millimeters): 1.11in | 28.20mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in | 100mm
Width (Inches | Millimeters): 0.39in | 10mm
Height (Inches | Millimeters): 0.08in | 2.05mm
Cable Leads (Inches | Millimeters): 7in | 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.2 oz | 62.37g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

5050-LED-WH & 5050-LED-WHWP


5050-LED-WHWP

White LED Strip 5050

5050 LED WHWP STRIP DATASHEET INFORMATION

LED Density: 9 / ft | 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

5050 SMD LED WHWP POWER CONSUMPTION

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max:1.84W /ft | 6.05W /m | 30.24W /5m Reel
Current Draw / Input Current / Current Max: 2520mA | 2.52A | per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 5% | 5m = 12%

PHOTOMETRY

Light Color: Neutral White – – 5,500°K
Brightness (Lumen) Tested at full intensity: 232lm/ft | 762lm/m | 3812lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: 16.4ft | 5m
LED Spacing Between Centers (Inches | Millimeters): 1.31in | 33.30mm
LED Spacing Between Edges (Inches | Millimeters): 1.11in | 28.20mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in | 100mm
Width (Inches | Millimeters): 0.50in | 12.70mm
Height (Inches | Millimeters): 0.175in | 4.45mm
Cable Leads (Inches | Millimeters): 7in | 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 6.6 oz | 187.11g
LED Strip Warranty: 1 Year Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization:USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of White LED Strips, lumen output increases with every generation
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

5050-LED-WHWP


5050-LED-RGB

5050-LED-RGB

LED INFO ON LED STRIP

LED Density: 9 /ft 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.78W /ft | 5.85W /m | 29.26W /5m Reel
Current Draw / Input Current / Current Max: 2438mA | 2.44A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 6% 5m = 15%
Power Drop with V+ In on Both Sides Approx. 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue |16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm | G: 524nm | B: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 123lm/ft | 402lm/m | 2010lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft | 5m
LED Spacing Between Centers (Inches | Millimeters): 1.31in | 33.30mm
LED Spacing Between Edges (Inches | Millimeters): 1.11in | 28.20mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in | 100mm (3 LEDs)
Width (Inches | Millimeters): 0.50in | 12.70mm
Height (Inches | Millimeters): 0.175in | 4.45mm
Cable Leads (Inches | Millimeters): 7in |178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 6.9 oz 195g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

1


5050-LED-RGBWP-3

5050-LED-RGBWP-3-

LED INFO ON LED STRIP

LED Density: 9 /ft 30 /m
LED Count (Total): 150 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.14W /ft |10.31W /m | 51.56W /5m Reel
Current Draw / Input Current / Current Max: 4297mA | 4.30A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 10% | 5m = 23%
Power Drop with V+ In on Both Sides Approx. 1m = 6% 5m = 9%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm | G: 524nm | B: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 245lm/ft | 804lm/m | 4020lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in | 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in | 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in | 50mm
Width (Inches | Millimeters): 0.39in | 10mm
Height (Inches | Millimeters): 0.08in | 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.7 oz | 76.54g
LED Strip Warranty: 3 Years Limited UL
Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

2


5050-LED-RGB-DD

S5050-LED-RGB-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.78W /ft 5.85W /m 29.26W /5m Reel
Current Draw / Input Current / Current Max: 2438mA 2.44A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 6% 5m = 15%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm G: 524nm B: 471nm
Brightness (Lumen): 123lm/ft 402lm/m 2010lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 1.31in 33.30mm
LED Spacing Between Edges (Inches | Millimeters): 1.11in 28.20mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in 100mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.70mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 13 oz 368g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

3


5050-LED-RGBWP-DD

RGB LED Strip Waterproof IP67 5050 SIRS-E High Quality 60 LED Meter

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.14 W /ft 10.31 W /m 51.56 W/ 5m Reel
Current Draw / Input Current / Current Max: 4297mA 4.30A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 10% 5m = 23%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm G: 524nm B: 471nm
Brightness (Lumen): 245 lm/ft 804 lm/m 4020 lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): .69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): .47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 7.2 oz 204g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

4


5050-LED-RGBWP-DD-3

5050-LED-RGBWP-DD3-

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.14 W /ft 10.31 W /m 51.56 W/ 5m Reel
Current Draw / Input Current / Current Max: 4297mA 4.30A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 10% 5m = 23%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue, 16 Million Color Possibilities
Peak Wave Length (nm) Approx. R: 625nm G: 524nm B: 471nm
Brightness (Lumen): 245 lm/ft 804 lm/m 4020 lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission None
Lifespan / Average Lifetime / Lumen Maintenance 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): .69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): .47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 3.7 oz 388g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

5


5050-LED-4RGBWH-72-A

4rgbwh-v2-510x510

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected 5050 SMD 4-in-1 RGBWH
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.28W /ft 14.03W /m 70.14W /5m Reel
Current Draw / Input Current / Current Max: 5845mA 5.85A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 27%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 13%

PHOTOMETRY

Light Color: RGB – RGBWH – – Red, Green, Blue, Neutral White
Peak Wave Length (nm) Approx. R: 630nm G: 520nm B: 490nm Neutral White: 5,500°K
Brightness (Lumen) Tested in all colors at full intensity: 371lm/ft 1217lm/m 6084lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.47in 12mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 3.5 oz 99.2g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

5050-LED-4RGBWW-72-A

4rgbww-v2-510x510

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected 5050 SMD 4-in-1 RGBWW
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.23W /ft 13.88W /m 69.42W /5m Reel
Current Draw / Input Current / Current Max: 5785mA 5.79A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 25%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 13%

PHOTOMETRY

Light Color: RGBWW – – Red, Green, Blue, Warm White
Peak Wave Length (nm) Approx:R: 630nm G: 520nm B: 463nm Warm White: 2,950°K
Brightness (Lumen) Tested in all colors at full intensity: 339lm/ft 1112lm/m 5562lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.47in 12mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 3.5 oz 99.2g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

6


5050-LED-4RGBA-72-A

RGBA LED Strip 4 in 1 Amber SIRS-E A Grade High Quality

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected 5050 SMD 4-in-1 RGBA
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.30W /ft 14.09W /m 70.45W /5m Reel
Current Draw / Input Current / Current Max: 5871mA 5.87A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 23%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 12%

PHOTOMETRY

Light Color: RGBA – Red, Green, Blue, Amber
Peak Wave Length (nm) Approx: R: 630nm G: 520nm B: 463nm Amber: 595nm
Brightness (Lumen) Tested in all colors at full intensity: 305lm/ft 1001lm/m 5006lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.47in 12mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 3.5 oz 99.2g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

7


5050-LED-4RGBA-72-AWP3

5050-LED-4RGBA-72-AWP3-main-v3-510x510

LED INFO ON LED STRIP

LED Density: 22 /ft 72 /m
LED Count (Total): 360 Per Reel
LED Type: High Quality Selected 5050 SMD 4-in-1 RGBA
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 4.30W /ft 14.09W /m 70.45W /5m Reel
Current Draw / Input Current / Current Max: 5871mA 5.87A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 12% 5m = 23%
Power Drop with V+ In on Both Sides Approx: 1m = 9% 5m = 12%

PHOTOMETRY

Light Color: RGBA – Red, Green, Blue, Amber
Peak Wave Length (nm) Approx: R: 630nm G: 520nm B: 463nm Amber: 595nm
Brightness (Lumen) Tested in all colors at full intensity: 305lm/ft 1001lm/m 5006lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.54in 13.70mm
LED Spacing Between Edges (Inches | Millimeters): 0.35in 9mm
Minimum Cuttable Segments (Inches | Millimeters): 1.64in 41.60mm (Every 3 LEDs)
Width (Inches | Millimeters): 0.56in 14.32mm
Height (Inches | Millimeters): 0.18in 4.60mm
Cable Leads (Inches | Millimeters): 12in 304.80mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 18.2 oz 515.9g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.

SEGMENT CLOSE UP & DIMENSIONS

8


5050-LED-WHWP-DD3

Neutral White LED Submersible IP68 5050 SIRS-E 16.4 60 LED Meter

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.52 W /ft 11.54 W /m 57.72 W/ 5m Reel
Current Draw / Input Current / Current Max: 4810mA 4.81A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 16%

PHOTOMETRY

Light Color: Neutral White – 5,500°K
Brightness (Lumen) Tested in all colors at full intensity: 465 lm/ft |1524 lm/m |7622 lm/Reel (Aprox.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): .69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 14.6 oz 413.90g
LED Strip Warranty: 1 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-CW-DD

Cool White LED Strip 5050 SIRS-E 16.4 Feet 60 LED Meter

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.18W /ft 10.42W /m 52.08W /5m Reel
Current Draw / Input Current / Current Max: 4340mA 4.34A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%
Power Drop with V+ In on Both Sides Approx: 1m = 3% 5m = 4%

PHOTOMETRY

Light Color: Cool White – – 13,000°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen): 350lm/ft 1150lm/m 5749lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.39in 10mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-CWWP-DD

5050-LED-CWWP-DD

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.18W /ft 10.42W /m 52.08W /5m Reel
Current Draw / Input Current / Current Max: 4340mA 4.34A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%

PHOTOMETRY

Light Color: Cool White – – 13,000°K
Brightness (Lumen): 350lm/ft 1150lm/m 5749lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 7.3 oz 206.95g
LED Strip Warranty: 1 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-CWWP-DD3

5050-LED-CWWP-DD3-

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.18 W /ft 10.42 W /m 52.08 W/ 5m Reel
Current Draw / Input Current / Current Max: 4340mA 4.34A 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%

PHOTOMETRY

Light Color: Cool White – 13,000°K
Brightness (Lumen): 350 lm/ft | 1150 lm/m | 5749 lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): .47in 12mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm (3 LEDs)
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 14.6 oz 413.90g
LED Strip Warranty: 1 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • Due to our constant revisions/upgrades of our line of A-Grade LED Strips, lumen output increases with every generation. Please call for the latest measurements.
  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-WW-DD

Warm White LED Strip 5050 SIRS-E 16.4 Feet 60 LED Meter

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.44W /ft 11.28W /m 56.40W /5m Reel
Current Draw / Input Current / Current Max: 4700mA 4.70A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%
Power Drop with V+ In on Both Sides Approx: 1m = 4% 5m = 6%

PHOTOMETRY

Light Color: Warm White – – 2,950°K
Peak Wave Length (nm) Approx: N/A
Brightness (Lumen): 544lm/ft 1785lm/m 8923lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.39in 10mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 2.9 oz 82.21g
LED Strip Warranty: 3 Years Limited
UL Certification: UL Listed; UL 2108; E479339

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China Preassembly / USA Final Assembly
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-WWWP-DD

5050-LED-WWWP-DD-

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.44W /ft 11.28W /m 56.40W /5m Reel
Current Draw / Input Current / Current Max: 4700mA 4.70A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%

PHOTOMETRY

Light Color: Warm White – – 2,950°K
Brightness (Lumen): 544lm/ft 1785lm/m 8923lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 7.3 oz 206.95g
LED Strip Warranty: 1 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-WWWP-DD3

5050-LED-WWWP-DD3-

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 3.44W /ft 11.28W /m 56.40W /5m Reel
Current Draw / Input Current / Current Max: 4700mA 4.70A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = 7% 5m = 17%

PHOTOMETRY

Light Color: Warm White – – 2,950°K
Brightness (Lumen): 544lm/ft 1785lm/m 8923lm/Reel (Approx.)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.69in 17.50mm
LED Spacing Between Edges (Inches | Millimeters): 0.47in 12.00mm
Minimum Cuttable Segments (Inches | Millimeters): 1.96in 50mm
Width (Inches | Millimeters): 0.50in 12.7mm
Height (Inches | Millimeters): 0.175in 4.45mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP68
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Copper
LED Strip Net Weight (Without Packaging Material): 14.6 oz 413.90g
LED Strip Warranty: 1 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-RGBWP-34DMX5M

DMX LED Strip 34 Pixel/m RGB SIRS-E PixelDMX Controlled

LED INFO ON LED STRIP

LED Density: 10 /ft 34 /m
LED Count (Total): 170 Per Reel (1 LED = 1 Pixel)
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 5V DC
Power Consumption (Watts) Max.: 1.57 W /ft 5.14 W /m 25.7 W/ 5m Reel
Current Draw / Input Current / Current Max: 5140mA 5.14A per 5m Reel
Power Drop Along the Strip (Meter) Approx: N/A (power is required on both sides of the strip)

PHOTOMETRY

Light Color: RGB – Red, Green, Blue
Peak Wave Length (nm) Approx: Red: 625nm Green: 524nm Blue: 471nm
Brightness (Lumen) Tested in all colors at full intensity: 152.07 lm/ft 498.8 lm/m 2494 lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 1.14in 29mm (Pixel Pitch)
LED Spacing Between Edges (Inches | Millimeters): 0.94in 23.93mm
Minimum Cuttable Segments (Inches | Millimeters): 1.15in 29.29mm (1 LED)
Width (Inches | Millimeters): 0.55in 13.90mm
Height (Inches | Millimeters): 0.14in 3.65mm
Cable Leads (Inches | Millimeters): 32in 812.8mm

LED STRIP INFORMATION

LED Strip IP Rating: Waterproof IP67
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: Black
LED Strip Net Weight (Without Packaging Material): 10.8 oz 306.17g
LED Strip Warranty: 1 Year Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-RGBA-DD-A

5050-LED-RGBA-DD-A

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 1.87 W /ft 6.00 W /m 30.0 W/ 5m Reel
Current Draw / Input Current / Current Max: 2570mA 2.57A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = ~4% 5m = ~20%

PHOTOMETRY

Light Color: RGB – Red, Green, Blue, Amber
Peak Wave Length (nm) Approx: Red: 630 Green: 520 Blue: 463 Amber: 592
Brightness (Lumen): 121.95 lm/ft 400 lm/m 2000 lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.60in 15.28mm
LED Spacing Between Edges (Inches | Millimeters): 0.44in 11.35mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in 100mm (Every 6 LEDs)
Width (Inches | Millimeters): 0.47in 11.95mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 7.2 oz 204g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.


5050-LED-RGBWW-DD-A

5050-LED-RGBWW-DD-A

LED INFO ON LED STRIP

LED Density: 18 /ft 60 /m
LED Count (Total): 300 Per Reel
LED Type: High Quality Selected 5050 SMD
LED Ambience Operating Temperature: -20˚F to 120˚F
LED Storage Temperature: -13˚F to 140˚F

POWER*

Working Voltage / Input Voltage / Voltage Forward: 12V DC
Power Consumption (Watts) Max.: 2.30 W /ft 7.56 W /m 37.8 W/ 5m Reel
Current Draw / Input Current / Current Max: 3150mA 3.15A per 5m Reel
Power Drop Along the Strip (Meter) Approx: 1m = ~4% 5m = ~20%

PHOTOMETRY

Light Color: RGBWW – Red, Green, Blue, Warm White
Peak Wave Length (nm) Approx: R: 630nm G: 520nm B: 463nm 592 Warm White: 2,700 K
Brightness (Lumen): 121.95 lm/ft 400 lm/m 2000 lm/Reel (5m)
Beam Angle: 120˚
UV/IR Emission: None
Lifespan / Average Lifetime / Lumen Maintenance: 50,000 – 75,000 Hours (50% Brightness Loss)

DIMENSIONS

Reel Total Length: ( Feet | Meter) 16.4ft 5m
LED Spacing Between Centers (Inches | Millimeters): 0.60in 15.28mm
LED Spacing Between Edges (Inches | Millimeters): 0.44in 11.35mm
Minimum Cuttable Segments (Inches | Millimeters): 3.94in 100mm (Every 6 LEDs)
Width (Inches | Millimeters): 0.47in 11.95mm
Height (Inches | Millimeters): 0.08in 2.05mm
Cable Leads (Inches | Millimeters): 7in 178mm

LED STRIP INFORMATION

LED Strip IP Rating: Non Waterproof IP40
LED Strip Adhesive: High Quality 3M Adhesive
LED Strip Finish Color / Product Color: White
LED Strip Net Weight (Without Packaging Material): 7.2 oz 204g
LED Strip Warranty: 3 Years Limited

PRODUCT COUNTRY OF ORIGIN

QC Quality Control: USA
Product Engineering & Design: USA
Assembled: China
Technical Support: USA
Product Customization: USA

INSTALLATION MATERIALS & ASSOCIATED PRODUCTS

Dimming and Color Mixing Options: DMX, Radio Frequency (RF), Infrared (IR), & Analog
Max Length in One Run for Linear Lighting: Unlimited Thru Amplifiers or DMX Controllers
Power Supply: Options Available
DMX Programming & Stand Alone: Options Available
LED RGB Strip Connectors: Options Available
4 Wire Installation Cables: Options Available
2 Wire Installation Cables: Options Available
Installation Accessories: Options Available
Installation Kits: Soldering Kit, Heatshrink Kit, Silicone Tube

(*) NOTES

  • The Strip Power Rating was measured with power input on both ends
  • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends.
  • LED electrical and optical characteristics change with the die manufacturing date.
  • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics.
  • We reserve the right to change any data without prior notice.