-
Out of stockSKU# DMX-TEST-02Free Ground Shipping.
The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
Out of stockSKU# LED-CON-RF-WPTechnical data:
- Input voltage: DC12V/24V
- Output current: 3A/channel(9A in total)
- Control distance: 20m
- Frequency: 433MHZ
- Work Temperature: -20°C to 70°C
- IP 65
- remote wireless control for convenient use
- dropping electricity protection circuit (Powerdown mode)
- 7 single static colors
- 7 single colors fades (speed adjustable)
- Gradual color changing (speed adjustable)
- RGB jump
-
SKU# LED-PIXEL-12Features:
- Can be seen from 360°
- Full dimming capability 0%-100%
- Full RGB capability
- Works with any type of DMX control
- Colorful and vivid effects can easily be achieved
- If set up in group, great 2D effects can be achieved
- One year warranty
- High quality diffused plastic casing for optimum optics
- Mounting brackets included for installation
- Model: LED-PIXEL-12
- Operating Voltage: DC 24V
- Max Current: 3.6W
- Ambient Temperature: -20°C~60°C
- IP Rating: IP65
- LED Type: SMD RGB 5050
- Total LEDs: 3
- Total Pixels: 1
- Total DMX Channels: 3
- DMX Addressability: Self Address
- Viewing Angle: 360°
- Weight: 264g
- 104mm x 104mm x 83mm
- 4.09in. x 4.09in. x 3.26in
-
SKU# LED-PIXEL-T-INI-DMXInitial T Cable for LED Pixels. Use this cable to begin your chain. Add DMX signal, Power and Connect to the vertical tube or pixel cable.
- XLR 3 Pin MALE (DMX IN)
- 4 Pin Waterproof lock connection FEMALE (Power/DMX signal)
- 2 Pin Waterproof lock connection MALE (Power)
-
SKU# LED-PIXEL-T-PWT Cable for LED Pixels used in daisy chain configuration, allows you to add more power supplies in the chain or a DMX terminator at the end. 3 Connectors
- 4 Pin Waterproof lock connection MALE
- 4 Pin Waterproof lock connection FEMALE
- 2 Pin Waterproof lock connection MALE
-
SKU# DMX-TUBE-BIPIXELThe SIRS-E DMX tube is an LED tube that can be controlled via DMX. The LED's located inside the tube are made up of the same RGB LED's from our strips; meaning this tube can generate a significant amount of color combinations ready for your showcase. It can also be used with any DMX control to achieve colorful and vivid effects. Tech Specs:
1 Meter - LED QTY: 64 pcs
- Pixels: 16
- DMX Channels: 48
- Power: 24W
- Weight: 350g
0.5 Meter - LED QTY: 32 pcs
- Pixels: 8
- DMX Channels: 24
- Power: 18W
- Weight: 175g
1.5 Meters - LED QTY: 96 pcs
- Pixels: 48
- DMX Channels: 72
- Power: 35W
- Weight: 500g
2 Meters - LED QTY: 128 pcs
- Pixels: 64
- DMX Channels: 96
- Power: 46W
- Weight: 670g
- Constant current driver is designed on the double side vertical tubes.
- Double sided light effects can be seen from 360 degree angles. Transparent tube make the light much clear and pure.
- Environment friendly, no harsh glare and buzzing noise, no flicker.
- DMX Starting Address: Manually Addressable with external device
- View Angle: 360°
- Voltage: DC12V
- Control: DMX
- Operating Temperature: -20°C to 50°C
- Protection: IP65
Applications:
- DJs
- Night clubs
- Television studios
- Theater
- Special effects
- and more
- DMX-TUBE-1608 DataSheet
- DMX-TUBE-3216 DataSheet
- DMX-TUBE-4824 DataSheet
- DMX-TUBE-6432-DataSheet
- DMX Address Writer Datasheet