- A 120 Ohm DMX512 Terminator in an XLR connector
- Two XLR versions available, male 3-pin or male 5-pin
- Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment
- Use to avoid data signals being reflected from the end of the data cable
- Very robust, rugged molded housing with non-slip grip
- Product Weight (including packaging): 31g / 1.1oz
- Gold-plated pins on the connector
- Easy to use
- Low cost
- RoHS, REACH, and California Prop65 Certified
-
SKU# XLR3-TERM XLR5-TERMDMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES
-
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX
-
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:
- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical
- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# PC-6SFReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life. Specifications:
- Length: 6 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to two 3-pin shroud female(IEC-320-C13)
- Design: Female connectors plug directly into device and male connector plugs into standard outlet
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
- Connects computer to wall outlet
- Stranded unshielded PC or monitor power cable.
- 110/120 volt
- Ideal when you are running out of space on your power/surge protector or wall outlets
-
SKU# PC-4FReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life.
- Length: 4 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to 3 wire
- Design: Male connector plugs into standard outlet; bare wires for AC connection of power supplies, and other devices that require hardwired AC power
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
-
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits
- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product