-
SKU# SS4PER FT. Professional Series Commercial Speaker Cable. 4 Conductor, 13 AWG Speaker Cable, Black, Per Ft. NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE SKU# SS4 -
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET SKU# RJ45-MK2-5 -
SKU# DURACAT5E4 Pair DURACAT 24AWG CAT5E Cable is ideal for making your own heavy duty RJ45 cable. This high quality cable is tested to work best when paired with RJ45-PLUG-KIT male connectors for custom length Ethernet cables. This rugged 4 pair cable is shielded by thick coating. It is built for a high speed clean signal that can travel long distances. This cable is ideal of DMX lighting setups where signal purity is of great importance. Meets Cat5E Specifications. SKU# DURACAT5E -
SKU# CAT5E-7919APlease Note: Price is per foot BELDEN 7919A 4 Pair 24AWG CAT5E Shielded Industrial Ethernet Cable Equipped with a layer of Polyolefin anti-static plastic, aluminum foil-polyester tape, and industrial grade PVC (Polyvinyl Chloride) -
SKU# RJ45-PLUG-KITRJ45 Heavy Duty Plug and Boot Kit is perfect for creating your own heavy duty RJ45 Cable. Its high quality components are tested to work best with DURACAT5E for custom length Ethernet cables. Unlike conventional RJ45 cables, heavy duty variants transfer cleaner signals at high speeds. This kit is ideal for DMX lighting setups where signal purity is of utmost importance. Heavy duty casing makes this ideal for installations with long cable runs. Meets Cat5E Specifications. Please Note: Each kit contains components necessary for one male RJ45 end. 2 Kits may be required for one cable with 2 male RJ45 ends. SKU# RJ45-PLUG-KIT -
SKU# PC-4FReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life.- Length: 4 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to 3 wire
- Design: Male connector plugs into standard outlet; bare wires for AC connection of power supplies, and other devices that require hardwired AC power
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
-
SKU# PC-6SFReplace your overused or misplaced power cables. Universal Power Cords are designed to work with most electric devices that use the 3-pin shroud power connector. All power cables feature a fully molded design that provides maximum durability and long-life. Specifications:- Length: 6 Ft
- Cable Type: Heavy-Duty 18AWG
- Connectors: 3-prong grounded plug male(NEMA 5-15-P) to two 3-pin shroud female(IEC-320-C13)
- Design: Female connectors plug directly into device and male connector plugs into standard outlet
- Compatibility: With any electrical devices that use a 3-pin shroud power connector
- Application: Replacement power cord
- Certification: UL listed
- Connects computer to wall outlet
- Stranded unshielded PC or monitor power cable.
- 110/120 volt
- Ideal when you are running out of space on your power/surge protector or wall outlets
SKU# PC-6SF -
SKU# XLRJ45-XXXLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX -
SKU# XLR3-TERM XLR5-TERMDMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES- A 120 Ohm DMX512 Terminator in an XLR connector
- Two XLR versions available, male 3-pin or male 5-pin
- Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment
- Use to avoid data signals being reflected from the end of the data cable
- Very robust, rugged molded housing with non-slip grip
- Product Weight (including packaging): 31g / 1.1oz
- Gold-plated pins on the connector
- Easy to use
- Low cost
- RoHS, REACH, and California Prop65 Certified
-
SKU# LED-PLUG-2MFLED strip and power supply 2 wire plug. Easy installation with only 2 screws. No soldering, splicing or crimping required. Great for multiple uses including:- Single Color LED Strips
- DMX LED Strip Power
- Power Supplies
- Custom Power Cables
- 38mm x 14mm x 13mm
- External Diameter: 5.5mm
- Internal Diameter: 2.1mm
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# NC4FP-1TECHNICAL DATA Electrical- Number of contacts: 3 - 7 (except MP: 3-6)
- Rated voltage: 50 V ac
- Contact resistance: < 5 m
- Insulation resistance - initial: > 2 G
- - after damp heat test: > 1 G
- -IEC 68-2-30)
- Dielectric strength: 1500 V dc
- Rated current:
- 3 pole: 16 I [A], 2.5/14 mm2/AWG, ≤ 4 C
- 4 pole: 10 I [A], 1.5/16 mm2/AWG, ≤ 7 C
- 5 and 6 pole: 7.5 I [A], 1.0/18 mm2/AWG, ≤ 7 C
- 7 pole: 5 I [A], 1.0/18 mm2/AWG, ≤ 9 C
- Lifetime: > 1000 mating cycles
- Insertion / withdrawal force: ≤ 20 N
- Retention method (Female versions only): - standard: latch lock
- "-0" version: retention spring
- Separating force: ≤ 20 N
- Shell: ZnAl4Cu1, gal Ni or black Cr plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: - female (3 pole): CuSn6
- female (4-7pole) & male: CuZn39Pb3
- Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
- Latch lock & spring: CK 67 steel, treated
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
-
SKU# NAC3FCBLockable cable connector, power-out, screw terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled SKU# NAC3FCB -
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3MPAChassis connector, power-in, 3/16'' flat tab terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3FCALockable cable connector, power-in, screw terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled
Quick Links:
SKU# NAC3FCA -
-
-
-
-
SKU# RJ45-TERN-MK2Heavy Duty RJ45 Signal Terminator for DMX Driver by SIRS-E Made in the USA Quick Links: SKU# RJ45-TERN-MK2
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
SUBSCRIBE TO OUR NEWSLETTER
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
