-
SKU# DURACAT5E4 Pair DURACAT 24AWG CAT5E Cable is ideal for making your own heavy duty RJ45 cable. This high quality cable is tested to work best when paired with RJ45-PLUG-KIT male connectors for custom length Ethernet cables. This rugged 4 pair cable is shielded by thick coating. It is built for a high speed clean signal that can travel long distances. This cable is ideal of DMX lighting setups where signal purity is of great importance. Meets Cat5E Specifications. SKU# DURACAT5E
-
SKU# DMXN20-5DHigh Quality handmade cable. The SIRS-E DMXN20-5D DMX Cable, made in the USA, features high-quality 5-pin XLR Neutrik Connectors and utilizes Rapco Horizon's 110-ohm digital Pro Lighting Cable. This cable is commonly used in theatrical productions, concerts, and other live events for controlling stage lighting and effects. DMX (Digital Multiplex) cables are specifically designed to carry digital signals for such applications. This specific cable is equipped with 5-pin Neutrik XLR male and female connectors. It's essential to ensure that this is compatible with your equipment. The durable, high-quality Neutrik connectors and Rapco Horizon cable are designed to withstand the rigors of live performance settings. Keep in mind, it's crucial to use DMX cables for DMX lighting, and not microphone cables, even if they might have similar XLR connectors. Most microphone cables are not designed to carry digital DMX signals. Video(s): Main Features
- High Quality & Heavy-Duty DMX Cable hand-made in the USA
- DMX512 and AES/EBU digital cable with 2 pairs of 24 AWG stranded bare copper.
- Features cellular polyethylene insulation, an overall shield, and a matte PVC jacket.
- 5-Pin male & female connector with Nickel housing and silver contacts.
- Rugged zinc Diecast shell, long-lasting and dependable.
- Limited Lifetime Warranty
Technical Specifications
- Conductor: AWG Size and Stranding: 24 AWG 7 strands 32 AWG
- Conductor Material: Bare annealed copper
- Capacitance Between Conductors: 13.5 pF/ft @ 1 kHz 7.2
- Capacitance Conductor to Shield: 25 pF/ft @ 1 kHz 7.3
- Characteristic Impedance: 110 ohms +/- 15 ohms @ 1 MHz
- Length: 20ft
- Weight: 14oz
Documents
MADE IN USA SKU# DMXN20-5D -
SKU# DMX-4CSXP-22XX-XXThe SIRS-E® ProDMX-CAB DMX512 Cable 2 Pair (4 Conductors + Shield), is a thin 0.169” Shielded cable utilized for lighting control. This 22-AWG stranded bare-copper-conductor cable provides the ideal conductivity needed for DMX512 transmission. Made in the USA with high-quality materials, this is a cable you can trust for your DMX applications. This product is available in 2 versions; Plenum UL Listed and Waterproof IP65. Video(s): Applications
- DMX512 Lighting Control
- Temporary or Permanent Installations
- Stage Applications
-
SKU# NEUTRIK-XX-4TECHNICAL DATA Electrical
- Number of contacts: 4
- Contact resistance: ≤ 3 m
- Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
- Rated current: 10 A
- AWG: 1.5 mm²/16 AWG
- Capacitance between contacts: ≤ 7 pF
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm – 8.0 mm
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- IEC tentative standard & Switchcraft® & Cannon XLR
-
SKU# NEUTRIK-XX-55 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die-cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
-
SKU# NEUTRIK-XX-33 pole Male or Female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.SKU# NEUTRIK-XX-3
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design - valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well proteced against any damage
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity